Re: [PATCH] powerpc: Enable kernel XZ compression option on PPC_85xx

[Michael Ellerman <mpe@ellerman.id.au>]

Daniel Axtens <dja@axtens.net> writes:
> Pawel Dembicki <paweldembicki@gmail.com> writes:
>
>> Enable kernel XZ compression option on PPC_85xx. Tested with
>> simpleImage on TP-Link TL-WDR4900 (Freescale P1014 processor).
>>
>> Suggested-by: Christian Lamparter <chunkeey@gmail.com>
>> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
>> ---
>>  arch/powerpc/Kconfig | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
>> index 8c1c636308c8..daf4cb968922 100644
>> --- a/arch/powerpc/Kconfig
>> +++ b/arch/powerpc/Kconfig
>> @@ -196,7 +196,7 @@ config PPC
>>  	select HAVE_IOREMAP_PROT
>>  	select HAVE_IRQ_EXIT_ON_IRQ_STACK
>>  	select HAVE_KERNEL_GZIP
>> -	select HAVE_KERNEL_XZ			if PPC_BOOK3S || 44x
>> +	select HAVE_KERNEL_XZ			if PPC_BOOK3S || 44x || PPC_85xx
>
> (I'm not super well versed in the compression stuff, so apologies if
> this is a dumb question.) If it's this simple, is there any reason we
> can't turn it on generally, or convert it to a blacklist of platforms
> known not to work?

For some platforms enabling XZ requires that your u-boot has XZ support,
and I'm not very clear on when that support landed in u-boot and what
boards have it. And there are boards out there with old/custom u-boots
that effectively can't be updated.

But as a server guy I don't really know the details of all that very
well. So if someone tells me that we should enable XZ for everything, or
as you say just black list some platforms, then that's fine by me.

cheers