From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linuxppc-dev@lists.ozlabs.org, paulus@samba.org
Subject: Re: [PATCH -V8 0/11] arch/powerpc: Add 64TB support to ppc64
Date: Fri, 07 Sep 2012 17:24:52 +0530 [thread overview]
Message-ID: <87fw6uoxo3.fsf@linux.vnet.ibm.com> (raw)
In-Reply-To: <1346982235.2385.33.camel@pasglop>
Benjamin Herrenschmidt <benh@kernel.crashing.org> writes:
> On Thu, 2012-09-06 at 20:59 +0530, Aneesh Kumar K.V wrote:
>> Hi,
>>
>> This patchset include patches for supporting 64TB with ppc64. I haven't booted
>> this on hardware with 64TB memory yet. But they boot fine on real hardware with
>> less memory. Changes extend VSID bits to 38 bits for a 256MB segment
>> and 26 bits for 1TB segments.
>
> Your series breaks the embedded 64-bit build. You seem to be hard wiring
> dependencies on slice stuff all over 64-bit stuff regardless of the MMU
> type or the value of CONFIG_MM_SLICES.
>
> Also all these:
>
>> +/* 4 bits per slice and we have one slice per 1TB */
>> +#if 0 /* We can't directly include pgtable.h hence this hack */
>> +#define SLICE_ARRAY_SIZE (PGTABLE_RANGE >> 41)
>> +#else
>> +/* Right now we only support 64TB */
>> +#define SLICE_ARRAY_SIZE 32
>> +#endif
>
> Things are just too horrible. Find a different way of doing it, if
> necessary create a new range define somewhere, whatever but don't leave
> that crap as-is, it's too wrong.
>
> Dropping the series for now.
>
You can drop the patch [PATCH -V8 07/11] arch/powerpc: Make some of the PGTABLE_RANGE dependency explicit
from the series. The above two problems are introduced by that patch and
as such can be looked up as a cleanup. I can rework the patch later. You
should be able to apply series without any conflicts even if you drop
that patch.
-aneesh
next prev parent reply other threads:[~2012-09-07 11:55 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-06 15:29 [PATCH -V8 0/11] arch/powerpc: Add 64TB support to ppc64 Aneesh Kumar K.V
2012-09-06 15:29 ` [PATCH -V8 01/11] arch/powerpc: Replace open coded CONTEXT_BITS value Aneesh Kumar K.V
2012-09-06 15:29 ` [PATCH -V8 02/11] arch/powerpc: Use hpt_va to compute virtual address Aneesh Kumar K.V
2012-09-06 15:29 ` [PATCH -V8 03/11] arch/powerpc: Simplify hpte_decode Aneesh Kumar K.V
2012-09-06 15:29 ` [PATCH -V8 04/11] arch/powerpc: Convert virtual address to vpn Aneesh Kumar K.V
2012-09-06 22:32 ` Paul Mackerras
2012-09-06 15:29 ` [PATCH -V8 05/11] arch/powerpc: Make KERN_VIRT_SIZE not dependend on PGTABLE_RANGE Aneesh Kumar K.V
2012-09-06 15:29 ` [PATCH -V8 06/11] arch/powerpc: Increase the slice range to 64TB Aneesh Kumar K.V
2012-09-06 15:29 ` [PATCH -V8 07/11] arch/powerpc: Make some of the PGTABLE_RANGE dependency explicit Aneesh Kumar K.V
2012-09-06 15:29 ` [PATCH -V8 08/11] arch/powerpc: Use the required number of VSID bits in slbmte Aneesh Kumar K.V
2012-09-06 15:29 ` [PATCH -V8 09/11] arch/powerpc: Use 32bit array for slb cache Aneesh Kumar K.V
2012-09-06 15:29 ` [PATCH -V8 10/11] arch/powerpc: Add 64TB support Aneesh Kumar K.V
2012-09-06 15:29 ` [PATCH -V8 11/11] arch/powerpc: Update VSID allocation documentation Aneesh Kumar K.V
2012-09-07 1:43 ` [PATCH -V8 0/11] arch/powerpc: Add 64TB support to ppc64 Benjamin Herrenschmidt
2012-09-07 5:42 ` Aneesh Kumar K.V
2012-09-07 7:53 ` Benjamin Herrenschmidt
2012-09-07 11:54 ` Aneesh Kumar K.V [this message]
2012-09-08 16:57 ` Aneesh Kumar K.V
2012-09-10 5:23 ` Benjamin Herrenschmidt
[not found] ` <1346945351-7672-5-git-send-email-aneesh.kumar__43423.5424655073$1346945525$gmane$org@linux.vnet.ibm.com>
2012-10-15 8:51 ` [PATCH -V8 04/11] arch/powerpc: Convert virtual address to vpn Andreas Schwab
2012-10-15 16:05 ` Aneesh Kumar K.V
2012-10-15 16:28 ` Aneesh Kumar K.V
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87fw6uoxo3.fsf@linux.vnet.ibm.com \
--to=aneesh.kumar@linux.vnet.ibm.com \
--cc=benh@kernel.crashing.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).