LinuxPPC-Dev Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 00/11] opencapi: enable card reset and link retraining
@ 2019-09-09 15:45 Frederic Barrat
  2019-09-09 15:45 ` [PATCH 01/11] powerpc/powernv/ioda: Fix ref count for devices with their own PE Frederic Barrat
                   ` (11 more replies)
  0 siblings, 12 replies; 33+ messages in thread
From: Frederic Barrat @ 2019-09-09 15:45 UTC (permalink / raw)
  To: linuxppc-dev, andrew.donnellan, clombard; +Cc: groug, alastair

This is the linux part of the work to use the PCI hotplug framework to
control an opencapi card so that it can be reset and re-read after
flashing a new FPGA image. I had posted it earlier as an RFC and this
version is mostly similar, with just some minor editing.

It needs support in skiboot:
http://patchwork.ozlabs.org/project/skiboot/list/?series=129724
On an old skiboot, it will do nothing.

A virtual PCI slot is created for the opencapi adapter, and its state
can be controlled through the pnv-php hotplug driver:

  echo 0|1 > /sys/bus/pci/slots/OPENCAPI-<...>/power

Note that the power to the card is not really turned off, as the card
needs to stay on to be flashed with a new image. Instead the card is
in reset.

The first part of the series mostly deals with the pci/ioda state, as
the opencapi devices can now go away and the state needs to be cleaned
up.

The second part is modifications to the PCI hotplug driver on powernv,
so that a virtual slot is created for the opencapi adapters found in
the device tree.



Frederic Barrat (11):
  powerpc/powernv/ioda: Fix ref count for devices with their own PE
  powerpc/powernv/ioda: Protect PE list
  powerpc/powernv/ioda: set up PE on opencapi device when enabling
  powerpc/powernv/ioda: Release opencapi device
  powerpc/powernv/ioda: Find opencapi slot for a device node
  pci/hotplug/pnv-php: Remove erroneous warning
  pci/hotplug/pnv-php: Improve error msg on power state change failure
  pci/hotplug/pnv-php: Register opencapi slots
  pci/hotplug/pnv-php: Relax check when disabling slot
  pci/hotplug/pnv-php: Wrap warnings in macro
  ocxl: Add PCI hotplug dependency to Kconfig

 arch/powerpc/include/asm/pnv-pci.h        |   1 +
 arch/powerpc/platforms/powernv/pci-ioda.c | 107 ++++++++++++++--------
 arch/powerpc/platforms/powernv/pci.c      |  10 +-
 drivers/misc/ocxl/Kconfig                 |   1 +
 drivers/pci/hotplug/pnv_php.c             |  82 ++++++++++-------
 5 files changed, 125 insertions(+), 76 deletions(-)

-- 
2.21.0


^ permalink raw reply	[flat|nested] 33+ messages in thread

end of thread, back to index

Thread overview: 33+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-09 15:45 [PATCH 00/11] opencapi: enable card reset and link retraining Frederic Barrat
2019-09-09 15:45 ` [PATCH 01/11] powerpc/powernv/ioda: Fix ref count for devices with their own PE Frederic Barrat
2019-09-10  0:20   ` Alastair D'Silva
2019-09-26 16:44   ` Andrew Donnellan
2019-09-26 17:15     ` Frederic Barrat
2019-09-27  6:54       ` Alexey Kardashevskiy
2019-09-09 15:45 ` [PATCH 02/11] powerpc/powernv/ioda: Protect PE list Frederic Barrat
2019-09-10  0:34   ` Alastair D'Silva
2019-09-09 15:45 ` [PATCH 03/11] powerpc/powernv/ioda: set up PE on opencapi device when enabling Frederic Barrat
2019-09-10  0:38   ` Alastair D'Silva
2019-09-27 16:43   ` Andrew Donnellan
2019-09-09 15:45 ` [PATCH 04/11] powerpc/powernv/ioda: Release opencapi device Frederic Barrat
2019-09-10  0:56   ` Alastair D'Silva
2019-09-09 15:45 ` [PATCH 05/11] powerpc/powernv/ioda: Find opencapi slot for a device node Frederic Barrat
2019-09-10  0:57   ` Alastair D'Silva
2019-09-09 15:45 ` [PATCH 06/11] pci/hotplug/pnv-php: Remove erroneous warning Frederic Barrat
2019-09-10  0:58   ` Alastair D'Silva
2019-09-09 15:45 ` [PATCH 07/11] pci/hotplug/pnv-php: Improve error msg on power state change failure Frederic Barrat
2019-09-10  0:59   ` Alastair D'Silva
2019-09-09 15:45 ` [PATCH 08/11] pci/hotplug/pnv-php: Register opencapi slots Frederic Barrat
2019-09-10  1:00   ` Alastair D'Silva
2019-09-09 15:45 ` [PATCH 09/11] pci/hotplug/pnv-php: Relax check when disabling slot Frederic Barrat
2019-09-10  1:00   ` Alastair D'Silva
2019-09-27 15:56   ` Andrew Donnellan
2019-09-09 15:45 ` [PATCH 10/11] pci/hotplug/pnv-php: Wrap warnings in macro Frederic Barrat
2019-09-10  1:03   ` Alastair D'Silva
2019-09-26 17:18   ` Andrew Donnellan
2019-09-09 15:46 ` [PATCH 11/11] ocxl: Add PCI hotplug dependency to Kconfig Frederic Barrat
2019-09-10  1:03   ` Alastair D'Silva
2019-09-26 17:11   ` Andrew Donnellan
2019-09-24  4:24 ` [PATCH 00/11] opencapi: enable card reset and link retraining Alexey Kardashevskiy
2019-09-24  6:39   ` Frederic Barrat
2019-09-25  0:20     ` Alexey Kardashevskiy

LinuxPPC-Dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linuxppc-dev/0 linuxppc-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linuxppc-dev linuxppc-dev/ https://lore.kernel.org/linuxppc-dev \
		linuxppc-dev@lists.ozlabs.org linuxppc-dev@ozlabs.org linuxppc-dev@archiver.kernel.org
	public-inbox-index linuxppc-dev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.ozlabs.lists.linuxppc-dev


AGPL code for this site: git clone https://public-inbox.org/ public-inbox