linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Paul Mackerras <paulus@ozlabs.org>
To: linuxppc-dev@ozlabs.org
Subject: [PATCH v2 5/9] powerpc/microwatt: Use standard 16550 UART for console
Date: Fri, 18 Jun 2021 13:46:32 +1000	[thread overview]
Message-ID: <YMwXGCTzedpQje7r@thinks.paulus.ozlabs.org> (raw)
In-Reply-To: <YMwWPcsaWzMlDPqQ@thinks.paulus.ozlabs.org>

From: Benjamin Herrenschmidt <benh@kernel.crashing.org>

This adds support to the Microwatt platform to use the standard
16550-style UART which available in the standalone Microwatt FPGA.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
---
 arch/powerpc/boot/dts/microwatt.dts      | 27 ++++++++++++----
 arch/powerpc/kernel/udbg_16550.c         | 39 ++++++++++++++++++++++++
 arch/powerpc/platforms/microwatt/Kconfig |  1 +
 arch/powerpc/platforms/microwatt/setup.c |  2 ++
 4 files changed, 63 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/boot/dts/microwatt.dts b/arch/powerpc/boot/dts/microwatt.dts
index 04e5dd92270e..974abbdda249 100644
--- a/arch/powerpc/boot/dts/microwatt.dts
+++ b/arch/powerpc/boot/dts/microwatt.dts
@@ -6,6 +6,10 @@ / {
 	model-name = "microwatt";
 	compatible = "microwatt-soc";
 
+	aliases {
+		serial0 = &UART0;
+	};
+
 	reserved-memory {
 		#size-cells = <0x02>;
 		#address-cells = <0x02>;
@@ -89,12 +93,6 @@ PowerPC,Microwatt@0 {
 		};
 	};
 
-	chosen {
-		bootargs = "";
-		ibm,architecture-vec-5 = [19 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00
-					  00 00 00 00 00 00 00 00 40 00 40];
-	};
-
 	soc@c0000000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -119,5 +117,22 @@ ICS: interrupt-controller@5000 {
 			#interrupt-cells = <2>;
 		};
 
+		UART0: serial@2000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x2000 0x8>;
+			clock-frequency = <100000000>;
+			current-speed = <115200>;
+			reg-shift = <2>;
+			fifo-size = <16>;
+			interrupts = <0x10 0x1>;
+		};
+	};
+
+	chosen {
+		bootargs = "";
+		ibm,architecture-vec-5 = [19 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00
+					  00 00 00 00 00 00 00 00 40 00 40];
+		stdout-path = &UART0;
 	};
 };
diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c
index 9356b60d6030..8513aa49614e 100644
--- a/arch/powerpc/kernel/udbg_16550.c
+++ b/arch/powerpc/kernel/udbg_16550.c
@@ -296,3 +296,42 @@ void __init udbg_init_40x_realmode(void)
 }
 
 #endif /* CONFIG_PPC_EARLY_DEBUG_40x */
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_MICROWATT
+
+#define UDBG_UART_MW_ADDR	((void __iomem *)0xc0002000)
+
+static u8 udbg_uart_in_isa300_rm(unsigned int reg)
+{
+	uint64_t msr = mfmsr();
+	uint8_t  c;
+
+	mtmsr(msr & ~(MSR_EE|MSR_DR));
+	isync();
+	eieio();
+	c = __raw_rm_readb(UDBG_UART_MW_ADDR + (reg << 2));
+	mtmsr(msr);
+	isync();
+	return c;
+}
+
+static void udbg_uart_out_isa300_rm(unsigned int reg, u8 val)
+{
+	uint64_t msr = mfmsr();
+
+	mtmsr(msr & ~(MSR_EE|MSR_DR));
+	isync();
+	eieio();
+	__raw_rm_writeb(val, UDBG_UART_MW_ADDR + (reg << 2));
+	mtmsr(msr);
+	isync();
+}
+
+void __init udbg_init_debug_microwatt(void)
+{
+	udbg_uart_in = udbg_uart_in_isa300_rm;
+	udbg_uart_out = udbg_uart_out_isa300_rm;
+	udbg_use_uart();
+}
+
+#endif /* CONFIG_PPC_EARLY_DEBUG_MICROWATT */
diff --git a/arch/powerpc/platforms/microwatt/Kconfig b/arch/powerpc/platforms/microwatt/Kconfig
index b52c869c0eb8..50ed0cedb5f1 100644
--- a/arch/powerpc/platforms/microwatt/Kconfig
+++ b/arch/powerpc/platforms/microwatt/Kconfig
@@ -6,6 +6,7 @@ config PPC_MICROWATT
 	select PPC_ICS_NATIVE
 	select PPC_ICP_NATIVE
 	select PPC_NATIVE
+	select PPC_UDBG_16550
 	help
           This option enables support for FPGA-based Microwatt implementations.
 
diff --git a/arch/powerpc/platforms/microwatt/setup.c b/arch/powerpc/platforms/microwatt/setup.c
index 1c1b7791fa57..0b02603bdb74 100644
--- a/arch/powerpc/platforms/microwatt/setup.c
+++ b/arch/powerpc/platforms/microwatt/setup.c
@@ -14,6 +14,7 @@
 #include <asm/machdep.h>
 #include <asm/time.h>
 #include <asm/xics.h>
+#include <asm/udbg.h>
 
 static void __init microwatt_init_IRQ(void)
 {
@@ -35,5 +36,6 @@ define_machine(microwatt) {
 	.name			= "microwatt",
 	.probe			= microwatt_probe,
 	.init_IRQ		= microwatt_init_IRQ,
+	.progress		= udbg_progress,
 	.calibrate_decr		= generic_calibrate_decr,
 };
-- 
2.31.1


  parent reply	other threads:[~2021-06-18  3:52 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-18  3:42 [PATCH v2 0/9] powerpc: Add support for Microwatt soft-core Paul Mackerras
2021-06-18  3:43 ` [PATCH v2 1/9] powerpc: Add Microwatt platform Paul Mackerras
2021-06-19  3:03   ` Nicholas Piggin
2021-06-18  3:44 ` [PATCH v2 2/9] powerpc: Add Microwatt device tree Paul Mackerras
2021-06-19 14:26   ` Segher Boessenkool
2021-06-20 12:08     ` Paul Mackerras
2021-06-21 13:54       ` Segher Boessenkool
2021-06-18  3:45 ` [PATCH v2 3/9] powerpc/microwatt: Populate platform bus from device-tree Paul Mackerras
2021-06-18  3:45 ` [PATCH v2 4/9] powerpc/xics: Add a native ICS backend for microwatt Paul Mackerras
2021-06-18  3:46 ` Paul Mackerras [this message]
2021-06-18  7:40   ` [PATCH v2 5/9] powerpc/microwatt: Use standard 16550 UART for console Nicholas Piggin
2021-06-18 12:12     ` Paul Mackerras
2021-06-19  2:58       ` Nicholas Piggin
2021-08-12 13:14   ` Christophe Leroy
2021-08-12 16:09     ` Segher Boessenkool
2021-06-18  3:47 ` [PATCH v2 6/9] powerpc/microwatt: Add support for hardware random number generator Paul Mackerras
2021-06-19  3:08   ` Nicholas Piggin
2021-06-19 14:36     ` Segher Boessenkool
2021-06-20  8:19       ` Nicholas Piggin
2021-06-18  3:48 ` [PATCH v2 7/9] powerpc/microwatt: Add microwatt_defconfig Paul Mackerras
2021-06-18  3:49 ` [PATCH v2 8/9] powerpc/boot: Fixup device-tree on little endian Paul Mackerras
2021-06-19  3:14   ` Nicholas Piggin
2021-06-18  3:49 ` [PATCH v2 9/9] powerpc/boot: Add a boot wrapper for Microwatt Paul Mackerras
2021-06-19  3:16   ` Nicholas Piggin
2021-06-19 14:45 ` [PATCH v2 0/9] powerpc: Add support for Microwatt soft-core Segher Boessenkool
2021-06-24 14:03 ` Michael Ellerman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YMwXGCTzedpQje7r@thinks.paulus.ozlabs.org \
    --to=paulus@ozlabs.org \
    --cc=linuxppc-dev@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).