LinuxPPC-Dev Archive on lore.kernel.org
 help / color / Atom feed
From: Anshuman Khandual <anshuman.khandual@arm.com>
To: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>,
	linux-mm@kvack.org, akpm@linux-foundation.org
Cc: linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH v4 05/13] mm/debug_vm_pgtable/savedwrite: Enable savedwrite test with CONFIG_NUMA_BALANCING
Date: Fri, 4 Sep 2020 09:39:24 +0530
Message-ID: <b89d69b2-caa0-e8e2-9401-8b3ff1546fbe@arm.com> (raw)
In-Reply-To: <20200902114222.181353-6-aneesh.kumar@linux.ibm.com>



On 09/02/2020 05:12 PM, Aneesh Kumar K.V wrote:
> Saved write support was added to track the write bit of a pte after
> marking the pte protnone. This was done so that AUTONUMA can convert
> a write pte to protnone and still track the old write bit. When converting
> it back we set the pte write bit correctly thereby avoiding a write fault
> again. Hence enable the test only when CONFIG_NUMA_BALANCING is enabled and
> use protnone protflags.
> 
> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
> ---
>  mm/debug_vm_pgtable.c | 11 +++++++++--
>  1 file changed, 9 insertions(+), 2 deletions(-)
> 
> diff --git a/mm/debug_vm_pgtable.c b/mm/debug_vm_pgtable.c
> index 4c73e63b4ceb..8704901f6bd8 100644
> --- a/mm/debug_vm_pgtable.c
> +++ b/mm/debug_vm_pgtable.c
> @@ -119,10 +119,14 @@ static void __init pte_savedwrite_tests(unsigned long pfn, pgprot_t prot)
>  {
>  	pte_t pte = pfn_pte(pfn, prot);
>  
> +	if (!IS_ENABLED(CONFIG_NUMA_BALANCING))
> +		return;
> +
>  	pr_debug("Validating PTE saved write\n");
>  	WARN_ON(!pte_savedwrite(pte_mk_savedwrite(pte_clear_savedwrite(pte))));
>  	WARN_ON(pte_savedwrite(pte_clear_savedwrite(pte_mk_savedwrite(pte))));
>  }
> +
>  #ifdef CONFIG_TRANSPARENT_HUGEPAGE
>  static void __init pmd_basic_tests(unsigned long pfn, pgprot_t prot)
>  {
> @@ -234,6 +238,9 @@ static void __init pmd_savedwrite_tests(unsigned long pfn, pgprot_t prot)
>  {
>  	pmd_t pmd = pfn_pmd(pfn, prot);
>  
> +	if (!IS_ENABLED(CONFIG_NUMA_BALANCING))
> +		return;
> +
>  	pr_debug("Validating PMD saved write\n");
>  	WARN_ON(!pmd_savedwrite(pmd_mk_savedwrite(pmd_clear_savedwrite(pmd))));
>  	WARN_ON(pmd_savedwrite(pmd_clear_savedwrite(pmd_mk_savedwrite(pmd))));
> @@ -1019,8 +1026,8 @@ static int __init debug_vm_pgtable(void)
>  	pmd_huge_tests(pmdp, pmd_aligned, prot);
>  	pud_huge_tests(pudp, pud_aligned, prot);
>  
> -	pte_savedwrite_tests(pte_aligned, prot);
> -	pmd_savedwrite_tests(pmd_aligned, prot);
> +	pte_savedwrite_tests(pte_aligned, protnone);
> +	pmd_savedwrite_tests(pmd_aligned, protnone);
>  
>  	pte_unmap_unlock(ptep, ptl);
>  
> 

No more checkpatch.pl warnings.

Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>

  reply index

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-02 11:42 [PATCH v4 00/13] mm/debug_vm_pgtable fixes Aneesh Kumar K.V
2020-09-02 11:42 ` [PATCH v4 01/13] powerpc/mm: Add DEBUG_VM WARN for pmd_clear Aneesh Kumar K.V
2020-09-02 11:42 ` [PATCH v4 02/13] powerpc/mm: Move setting pte specific flags to pfn_pte Aneesh Kumar K.V
2020-09-02 12:30   ` Christophe Leroy
2020-09-02 11:42 ` [PATCH v4 03/13] mm/debug_vm_pgtable/ppc64: Avoid setting top bits in radom value Aneesh Kumar K.V
2020-09-04  4:03   ` Anshuman Khandual
2020-09-02 11:42 ` [PATCH v4 04/13] mm/debug_vm_pgtables/hugevmap: Use the arch helper to identify huge vmap support Aneesh Kumar K.V
2020-09-02 12:40   ` Christophe Leroy
2020-09-02 12:53     ` Aneesh Kumar K.V
2020-09-04  4:08   ` Anshuman Khandual
2020-09-02 11:42 ` [PATCH v4 05/13] mm/debug_vm_pgtable/savedwrite: Enable savedwrite test with CONFIG_NUMA_BALANCING Aneesh Kumar K.V
2020-09-04  4:09   ` Anshuman Khandual [this message]
2020-09-02 11:42 ` [PATCH v4 06/13] mm/debug_vm_pgtable/THP: Mark the pte entry huge before using set_pmd/pud_at Aneesh Kumar K.V
2020-09-04  5:21   ` Anshuman Khandual
2020-09-02 11:42 ` [PATCH v4 07/13] mm/debug_vm_pgtable/set_pte/pmd/pud: Don't use set_*_at to update an existing pte entry Aneesh Kumar K.V
2020-09-04  5:34   ` Anshuman Khandual
2020-09-02 11:42 ` [PATCH v4 08/13] mm/debug_vm_pgtable/locks: Move non page table modifying test together Aneesh Kumar K.V
2020-09-04  3:58   ` Anshuman Khandual
2020-09-02 11:42 ` [PATCH v4 09/13] mm/debug_vm_pgtable/locks: Take correct page table lock Aneesh Kumar K.V
2020-09-04  5:39   ` Anshuman Khandual
2020-09-02 11:42 ` [PATCH v4 10/13] mm/debug_vm_pgtable/thp: Use page table depost/withdraw with THP Aneesh Kumar K.V
2020-09-04  4:21   ` Anshuman Khandual
2020-09-02 11:42 ` [PATCH v4 11/13] mm/debug_vm_pgtable/pmd_clear: Don't use pmd/pud_clear on pte entries Aneesh Kumar K.V
2020-09-04  6:03   ` Anshuman Khandual
2020-09-02 11:42 ` [PATCH v4 12/13] mm/debug_vm_pgtable/hugetlb: Disable hugetlb test on ppc64 Aneesh Kumar K.V
2020-09-04  6:19   ` Anshuman Khandual
2020-09-02 11:42 ` [PATCH v4 13/13] mm/debug_vm_pgtable: Avoid none pte in pte_clear_test Aneesh Kumar K.V
2020-09-11  2:13   ` Nathan Chancellor
2020-09-11  5:21     ` Aneesh Kumar K.V
2020-09-23  3:14       ` Anshuman Khandual
2020-10-11 20:02   ` Guenter Roeck
2020-10-12  4:29     ` Aneesh Kumar K.V
2020-09-02 11:46 ` Aneesh Kumar K.V
2020-09-04  4:16   ` Anshuman Khandual
2020-09-04  6:48 ` [PATCH v4 00/13] mm/debug_vm_pgtable fixes Anshuman Khandual
2020-09-04 15:26   ` Gerald Schaefer
2020-09-04 16:01     ` Gerald Schaefer
2020-09-04 17:53       ` Gerald Schaefer
2020-09-09  8:38         ` Anshuman Khandual
2020-09-08 15:39       ` Gerald Schaefer
2020-09-09  6:08         ` Aneesh Kumar K.V
2020-09-09 11:16           ` Gerald Schaefer
2020-09-09  8:15       ` Anshuman Khandual
2020-09-09 11:10         ` Gerald Schaefer
2020-09-09  8:08     ` Anshuman Khandual
2020-09-09 11:36       ` Gerald Schaefer
2020-09-13 11:03 ` [PATCH] mm/debug_vm_pgtable: Avoid doing memory allocation with pgtable_t mapped Aneesh Kumar K.V
2020-09-13 13:42   ` Matthew Wilcox
2020-10-13 20:58 ` [PATCH v4 00/13] mm/debug_vm_pgtable fixes Andrew Morton
2020-10-14  3:15   ` Aneesh Kumar K.V
2020-10-14 20:36     ` Andrew Morton
2020-10-15  2:59       ` Anshuman Khandual

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b89d69b2-caa0-e8e2-9401-8b3ff1546fbe@arm.com \
    --to=anshuman.khandual@arm.com \
    --cc=akpm@linux-foundation.org \
    --cc=aneesh.kumar@linux.ibm.com \
    --cc=linux-mm@kvack.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LinuxPPC-Dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linuxppc-dev/0 linuxppc-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linuxppc-dev linuxppc-dev/ https://lore.kernel.org/linuxppc-dev \
		linuxppc-dev@lists.ozlabs.org linuxppc-dev@ozlabs.org
	public-inbox-index linuxppc-dev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.ozlabs.lists.linuxppc-dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git