[PATCH v4 0/9]

[PATCH v4 0/9]

[Sam Bobroff]

Hi all,

Here is v4, with only a fix for a warning when CONFIG_IOV isn't defined.

Cover letter:

This patch set adds support for EEH recovery of hot plugged devices on pSeries
machines. Specifically, devices discovered by PCI rescanning using
/sys/bus/pci/rescan, which includes devices hotplugged by QEMU's device_add
command. (Upstream Linux pSeries guests running under QEMU/KVM don't currently
use slot power control for hotplugging.)

As a side effect this also provides EEH support for devices removed by
/sys/bus/pci/devices/*/remove and re-discovered by writing to /sys/bus/pci/rescan,
on all platforms.

The approach I've taken is to use the fact that the existing
pcibios_bus_add_device() platform hooks (which are used to set up EEH on
Virtual Function devices (VFs)) are actually called for all devices, so I've
widened their scope and made other adjustments necessary to allow them to work
for hotplugged and boot-time devices as well.

Because some of the changes are in generic PowerPC code, it's
possible that I've disturbed something for another PowerPC platform. I've tried
to minimize this by leaving that code alone as much as possible and so there
are a few cases where eeh_add_device_{early,late}() or eeh_add_sysfs_files() is
called more than once. I think these can be looked at later, as duplicate calls
are not harmful.

The first patch is a rework of the pcibios_init reordering patch I posted
earlier, which I've included here because it's necessary for this set.

I have done some testing for PowerNV on Power9 using a modified pnv_php module
and some testing on pSeries with slot power control using a modified rpaphp
module, and the EEH-related parts seem to work.

Cheers,
Sam.

Patch set changelog follows:

Patch set v4: 
Patch 1/9: powerpc/64: Adjust order in pcibios_init()
Patch 2/9: powerpc/eeh: Clear stale EEH_DEV_NO_HANDLER flag
Patch 3/9: powerpc/eeh: Improve debug messages around device addition
Patch 4/9: powerpc/eeh: Initialize EEH address cache earlier
Patch 5/9: powerpc/eeh: EEH for pSeries hot plug
Patch 6/9: powerpc/eeh: Refactor around eeh_probe_devices()
Patch 7/9: powerpc/eeh: Add bdfn field to eeh_dev
Patch 8/9: powerpc/eeh: Introduce EEH edev logging macros
Patch 9/9: powerpc/eeh: Convert log messages to eeh_edev_* macros
- Fixed compile warning when compiling without CONFIG_IOV.

Patch set v3: 
Patch 1/9: powerpc/64: Adjust order in pcibios_init()
Patch 2/9: powerpc/eeh: Clear stale EEH_DEV_NO_HANDLER flag
Patch 3/9: powerpc/eeh: Improve debug messages around device addition
Patch 4/9: powerpc/eeh: Initialize EEH address cache earlier
Patch 5/9: powerpc/eeh: EEH for pSeries hot plug
Patch 6/9: powerpc/eeh: Refactor around eeh_probe_devices()
Patch 7/9 (new in this version): powerpc/eeh: Add bdfn field to eeh_dev
Patch 8/9 (new in this version): powerpc/eeh: Introduce EEH edev logging macros
Patch 9/9 (new in this version): powerpc/eeh: Convert log messages to eeh_edev_* macros

Patch set v2: 
Patch 1/6: powerpc/64: Adjust order in pcibios_init()
Patch 2/6: powerpc/eeh: Clear stale EEH_DEV_NO_HANDLER flag
* Also clear EEH_DEV_NO_HANDLER in eeh_handle_special_event().
Patch 3/6 (was 4/8): powerpc/eeh: Improve debug messages around device addition
Patch 4/6 (was 6/8): powerpc/eeh: Initialize EEH address cache earlier
Patch 5/6 (was 3/8 and 7/8): powerpc/eeh: EEH for pSeries hot plug
- Dropped changes to the PowerNV PHB EEH flag, instead refactor just enough to
  use the existing flag from multiple places.
- Merge the little remaining work from the above change into the patch where
  it's used.
Patch 6/6 (was 5/8 and 8/8): powerpc/eeh: Refactor around eeh_probe_devices()
- As it's so small, merged the enablement message patch into this one (where it's used).
- Reworked enablement messages.

Patch set v1:
Patch 1/8: powerpc/64: Adjust order in pcibios_init()
Patch 2/8: powerpc/eeh: Clear stale EEH_DEV_NO_HANDLER flag
Patch 3/8: powerpc/eeh: Convert PNV_PHB_FLAG_EEH to global flag
Patch 4/8: powerpc/eeh: Improve debug messages around device addition
Patch 5/8: powerpc/eeh: Add eeh_show_enabled()
Patch 6/8: powerpc/eeh: Initialize EEH address cache earlier
Patch 7/8: powerpc/eeh: EEH for pSeries hot plug
Patch 8/8: powerpc/eeh: Remove eeh_probe_devices() and eeh_addr_cache_build()

Oliver O'Halloran (1):
  powerpc/eeh: Add bdfn field to eeh_dev

Sam Bobroff (8):
  powerpc/64: Adjust order in pcibios_init()
  powerpc/eeh: Clear stale EEH_DEV_NO_HANDLER flag
  powerpc/eeh: Improve debug messages around device addition
  powerpc/eeh: Initialize EEH address cache earlier
  powerpc/eeh: EEH for pSeries hot plug
  powerpc/eeh: Refactor around eeh_probe_devices()
  powerpc/eeh: Introduce EEH edev logging macros
  powerpc/eeh: Convert log messages to eeh_edev_* macros

 arch/powerpc/include/asm/eeh.h               | 21 ++++--
 arch/powerpc/include/asm/ppc-pci.h           |  7 +-
 arch/powerpc/kernel/eeh.c                    | 50 ++++++--------
 arch/powerpc/kernel/eeh_cache.c              | 37 ++---------
 arch/powerpc/kernel/eeh_dev.c                |  2 +
 arch/powerpc/kernel/eeh_driver.c             | 35 ++++------
 arch/powerpc/kernel/eeh_pe.c                 | 51 ++++-----------
 arch/powerpc/kernel/of_platform.c            |  3 +-
 arch/powerpc/kernel/pci-common.c             |  4 --
 arch/powerpc/kernel/pci_32.c                 |  4 ++
 arch/powerpc/kernel/pci_64.c                 | 12 +++-
 arch/powerpc/platforms/powernv/eeh-powernv.c | 56 +++++++++-------
 arch/powerpc/platforms/pseries/eeh_pseries.c | 68 ++++++++++----------
 arch/powerpc/platforms/pseries/pci.c         |  3 +-
 14 files changed, 159 insertions(+), 194 deletions(-)

-- 
2.22.0.216.g00a2a96fc9

[PATCH v4 1/9] powerpc/64: Adjust order in pcibios_init()

[Sam Bobroff]

The pcibios_init() function for 64 bit PowerPC currently calls
pci_bus_add_devices() before pcibios_resource_survey(), which seems
incorrect because it adds devices and attempts to bind their drivers
before allocating their resources (although no problems seem to be
apparent).

So move the call to pci_bus_add_devices() to after
pcibios_resource_survey(), while extracting call to the
pcibios_fixup() hook so that it remains in the same location.

This will also allow the ppc_md.pcibios_bus_add_device() hooks to
perform actions that depend on PCI resources, both during rescanning
(where this is already the case) and at boot time, to support future
work.

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
---
 arch/powerpc/kernel/pci-common.c |  4 ----
 arch/powerpc/kernel/pci_32.c     |  4 ++++
 arch/powerpc/kernel/pci_64.c     | 12 +++++++++---
 3 files changed, 13 insertions(+), 7 deletions(-)

diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index f627e15bb43c..1c448cf25506 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1379,10 +1379,6 @@ void __init pcibios_resource_survey(void)
 		pr_debug("PCI: Assigning unassigned resources...\n");
 		pci_assign_unassigned_resources();
 	}
-
-	/* Call machine dependent fixup */
-	if (ppc_md.pcibios_fixup)
-		ppc_md.pcibios_fixup();
 }
 
 /* This is used by the PCI hotplug driver to allocate resource
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index 50942a1d1a5f..b49e1060a3bf 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -263,6 +263,10 @@ static int __init pcibios_init(void)
 	/* Call common code to handle resource allocation */
 	pcibios_resource_survey();
 
+	/* Call machine dependent fixup */
+	if (ppc_md.pcibios_fixup)
+		ppc_md.pcibios_fixup();
+
 	/* Call machine dependent post-init code */
 	if (ppc_md.pcibios_after_init)
 		ppc_md.pcibios_after_init();
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index b7030b1189d0..f83d1f69b1dd 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -54,14 +54,20 @@ static int __init pcibios_init(void)
 	pci_add_flags(PCI_ENABLE_PROC_DOMAINS | PCI_COMPAT_DOMAIN_0);
 
 	/* Scan all of the recorded PCI controllers.  */
-	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
+	list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
 		pcibios_scan_phb(hose);
-		pci_bus_add_devices(hose->bus);
-	}
 
 	/* Call common code to handle resource allocation */
 	pcibios_resource_survey();
 
+	/* Add devices. */
+	list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
+		pci_bus_add_devices(hose->bus);
+
+	/* Call machine dependent fixup */
+	if (ppc_md.pcibios_fixup)
+		ppc_md.pcibios_fixup();
+
 	printk(KERN_DEBUG "PCI: Probing PCI hardware done\n");
 
 	return 0;
-- 
2.22.0.216.g00a2a96fc9

[PATCH v4 2/9] powerpc/eeh: Clear stale EEH_DEV_NO_HANDLER flag

[Sam Bobroff]

The EEH_DEV_NO_HANDLER flag is used by the EEH system to prevent the
use of driver callbacks in drivers that have been bound part way
through the recovery process. This is necessary to prevent later stage
handlers from being called when the earlier stage handlers haven't,
which can be confusing for drivers.

However, the flag is set for all devices that are added after boot
time and only cleared at the end of the EEH recovery process. This
results in hot plugged devices erroneously having the flag set during
the first recovery after they are added (causing their driver's
handlers to be incorrectly ignored).

To remedy this, clear the flag at the beginning of recovery
processing. The flag is still cleared at the end of recovery
processing, although it is no longer really necessary.

Also clear the flag during eeh_handle_special_event(), for the same
reasons.

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
---
 arch/powerpc/kernel/eeh_driver.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index 6f3ee30565dd..d6f54840a3a9 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -819,6 +819,10 @@ void eeh_handle_normal_event(struct eeh_pe *pe)
 		result = PCI_ERS_RESULT_DISCONNECT;
 	}
 
+	eeh_for_each_pe(pe, tmp_pe)
+		eeh_pe_for_each_dev(tmp_pe, edev, tmp)
+			edev->mode &= ~EEH_DEV_NO_HANDLER;
+
 	/* Walk the various device drivers attached to this slot through
 	 * a reset sequence, giving each an opportunity to do what it needs
 	 * to accomplish the reset.  Each child gets a report of the
@@ -1009,7 +1013,8 @@ void eeh_handle_normal_event(struct eeh_pe *pe)
  */
 void eeh_handle_special_event(void)
 {
-	struct eeh_pe *pe, *phb_pe;
+	struct eeh_pe *pe, *phb_pe, *tmp_pe;
+	struct eeh_dev *edev, *tmp_edev;
 	struct pci_bus *bus;
 	struct pci_controller *hose;
 	unsigned long flags;
@@ -1078,6 +1083,10 @@ void eeh_handle_special_event(void)
 				    (phb_pe->state & EEH_PE_RECOVERING))
 					continue;
 
+				eeh_for_each_pe(pe, tmp_pe)
+					eeh_pe_for_each_dev(tmp_pe, edev, tmp_edev)
+						edev->mode &= ~EEH_DEV_NO_HANDLER;
+
 				/* Notify all devices to be down */
 				eeh_pe_state_clear(pe, EEH_PE_PRI_BUS, true);
 				eeh_set_channel_state(pe, pci_channel_io_perm_failure);
-- 
2.22.0.216.g00a2a96fc9

[PATCH v4 3/9] powerpc/eeh: Improve debug messages around device addition

[Sam Bobroff]

Also remove useless comment.

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
---
 arch/powerpc/kernel/eeh.c                    |  2 +-
 arch/powerpc/platforms/powernv/eeh-powernv.c | 14 ++++++++----
 arch/powerpc/platforms/pseries/eeh_pseries.c | 23 +++++++++++++++-----
 3 files changed, 28 insertions(+), 11 deletions(-)

diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index d44533bba642..846cc697030c 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -1278,7 +1278,7 @@ void eeh_add_device_late(struct pci_dev *dev)
 	pdn = pci_get_pdn_by_devfn(dev->bus, dev->devfn);
 	edev = pdn_to_eeh_dev(pdn);
 	if (edev->pdev == dev) {
-		pr_debug("EEH: Already referenced !\n");
+		pr_debug("EEH: Device %s already referenced!\n", pci_name(dev));
 		return;
 	}
 
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 1cd5ebd7299c..629f9390d9af 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -46,10 +46,7 @@ void pnv_pcibios_bus_add_device(struct pci_dev *pdev)
 	if (!pdev->is_virtfn)
 		return;
 
-	/*
-	 * The following operations will fail if VF's sysfs files
-	 * aren't created or its resources aren't finalized.
-	 */
+	pr_debug("%s: EEH: Setting up device %s.\n", __func__, pci_name(pdev));
 	eeh_add_device_early(pdn);
 	eeh_add_device_late(pdev);
 	eeh_sysfs_add_device(pdev);
@@ -393,6 +390,10 @@ static void *pnv_eeh_probe(struct pci_dn *pdn, void *data)
 	int ret;
 	int config_addr = (pdn->busno << 8) | (pdn->devfn);
 
+	pr_debug("%s: probing %04x:%02x:%02x.%01x\n",
+		__func__, hose->global_number, pdn->busno,
+		PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn));
+
 	/*
 	 * When probing the root bridge, which doesn't have any
 	 * subordinate PCI devices. We don't have OF node for
@@ -487,6 +488,11 @@ static void *pnv_eeh_probe(struct pci_dn *pdn, void *data)
 	/* Save memory bars */
 	eeh_save_bars(edev);
 
+	pr_debug("%s: EEH enabled on %02x:%02x.%01x PHB#%x-PE#%x\n",
+		__func__, pdn->busno, PCI_SLOT(pdn->devfn),
+		PCI_FUNC(pdn->devfn), edev->pe->phb->global_number,
+		edev->pe->addr);
+
 	return NULL;
 }
 
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index 07e3fc2667aa..31733f6d642c 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -52,6 +52,8 @@ void pseries_pcibios_bus_add_device(struct pci_dev *pdev)
 	if (!pdev->is_virtfn)
 		return;
 
+	pr_debug("%s: EEH: Setting up device %s.\n", __func__, pci_name(pdev));
+
 	pdn->device_id  =  pdev->device;
 	pdn->vendor_id  =  pdev->vendor;
 	pdn->class_code =  pdev->class;
@@ -238,6 +240,10 @@ static void *pseries_eeh_probe(struct pci_dn *pdn, void *data)
 	int enable = 0;
 	int ret;
 
+	pr_debug("%s: probing %04x:%02x:%02x.%01x\n",
+		__func__, pdn->phb->global_number, pdn->busno,
+		PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn));
+
 	/* Retrieve OF node and eeh device */
 	edev = pdn_to_eeh_dev(pdn);
 	if (!edev || edev->pe)
@@ -281,7 +287,12 @@ static void *pseries_eeh_probe(struct pci_dn *pdn, void *data)
 
 	/* Enable EEH on the device */
 	ret = eeh_ops->set_option(&pe, EEH_OPT_ENABLE);
-	if (!ret) {
+	if (ret) {
+		pr_debug("%s: EEH failed to enable on %02x:%02x.%01x PHB#%x-PE#%x (code %d)\n",
+			__func__, pdn->busno, PCI_SLOT(pdn->devfn),
+			PCI_FUNC(pdn->devfn), pe.phb->global_number,
+			pe.addr, ret);
+	} else {
 		/* Retrieve PE address */
 		edev->pe_config_addr = eeh_ops->get_pe_addr(&pe);
 		pe.addr = edev->pe_config_addr;
@@ -297,11 +308,6 @@ static void *pseries_eeh_probe(struct pci_dn *pdn, void *data)
 		if (enable) {
 			eeh_add_flag(EEH_ENABLED);
 			eeh_add_to_parent_pe(edev);
-
-			pr_debug("%s: EEH enabled on %02x:%02x.%01x PHB#%x-PE#%x\n",
-				__func__, pdn->busno, PCI_SLOT(pdn->devfn),
-				PCI_FUNC(pdn->devfn), pe.phb->global_number,
-				pe.addr);
 		} else if (pdn->parent && pdn_to_eeh_dev(pdn->parent) &&
 			   (pdn_to_eeh_dev(pdn->parent))->pe) {
 			/* This device doesn't support EEH, but it may have an
@@ -310,6 +316,11 @@ static void *pseries_eeh_probe(struct pci_dn *pdn, void *data)
 			edev->pe_config_addr = pdn_to_eeh_dev(pdn->parent)->pe_config_addr;
 			eeh_add_to_parent_pe(edev);
 		}
+		pr_debug("%s: EEH %s on %02x:%02x.%01x PHB#%x-PE#%x (code %d)\n",
+			__func__, (enable ? "enabled" : "unsupported"),
+			pdn->busno, PCI_SLOT(pdn->devfn),
+			PCI_FUNC(pdn->devfn), pe.phb->global_number,
+			pe.addr, ret);
 	}
 
 	/* Save memory bars */
-- 
2.22.0.216.g00a2a96fc9

[PATCH v4 4/9] powerpc/eeh: Initialize EEH address cache earlier

[Sam Bobroff]

The EEH address cache is currently initialized and populated by a
single function: eeh_addr_cache_build().  While the initial population
of the cache can only be done once resources are allocated,
initialization (just setting up a spinlock) could be done much
earlier.

So move the initialization step into a separate function and call it
from a core_initcall (rather than a subsys initcall).

This will allow future work to make use of the cache during boot time
PCI scanning.

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
---
 arch/powerpc/include/asm/eeh.h  |  3 +++
 arch/powerpc/kernel/eeh.c       |  2 ++
 arch/powerpc/kernel/eeh_cache.c | 13 +++++++++++--
 3 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index 45c9b26e3cce..20105964287a 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -275,6 +275,7 @@ int __init eeh_ops_register(struct eeh_ops *ops);
 int __exit eeh_ops_unregister(const char *name);
 int eeh_check_failure(const volatile void __iomem *token);
 int eeh_dev_check_failure(struct eeh_dev *edev);
+void eeh_addr_cache_init(void);
 void eeh_addr_cache_build(void);
 void eeh_add_device_early(struct pci_dn *);
 void eeh_add_device_tree_early(struct pci_dn *);
@@ -335,6 +336,8 @@ static inline int eeh_check_failure(const volatile void __iomem *token)
 
 #define eeh_dev_check_failure(x) (0)
 
+static inline void eeh_addr_cache_init(void) { }
+
 static inline void eeh_addr_cache_build(void) { }
 
 static inline void eeh_add_device_early(struct pci_dn *pdn) { }
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 846cc697030c..ca8b0c58a6a7 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -1200,6 +1200,8 @@ static int eeh_init(void)
 	list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
 		eeh_dev_phb_init_dynamic(hose);
 
+	eeh_addr_cache_init();
+
 	/* Initialize EEH event */
 	return eeh_event_init();
 }
diff --git a/arch/powerpc/kernel/eeh_cache.c b/arch/powerpc/kernel/eeh_cache.c
index 320472373122..a790fa49c62d 100644
--- a/arch/powerpc/kernel/eeh_cache.c
+++ b/arch/powerpc/kernel/eeh_cache.c
@@ -254,6 +254,17 @@ void eeh_addr_cache_rmv_dev(struct pci_dev *dev)
 	spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags);
 }
 
+/**
+ * eeh_addr_cache_init - Initialize a cache of I/O addresses
+ *
+ * Initialize a cache of pci i/o addresses.  This cache will be used to
+ * find the pci device that corresponds to a given address.
+ */
+void eeh_addr_cache_init(void)
+{
+	spin_lock_init(&pci_io_addr_cache_root.piar_lock);
+}
+
 /**
  * eeh_addr_cache_build - Build a cache of I/O addresses
  *
@@ -269,8 +280,6 @@ void eeh_addr_cache_build(void)
 	struct eeh_dev *edev;
 	struct pci_dev *dev = NULL;
 
-	spin_lock_init(&pci_io_addr_cache_root.piar_lock);
-
 	for_each_pci_dev(dev) {
 		pdn = pci_get_pdn_by_devfn(dev->bus, dev->devfn);
 		if (!pdn)
-- 
2.22.0.216.g00a2a96fc9

[PATCH v4 5/9] powerpc/eeh: EEH for pSeries hot plug

[Sam Bobroff]

On PowerNV and pSeries, devices currently acquire EEH support from
several different places: Boot-time devices from eeh_probe_devices()
and eeh_addr_cache_build(), Virtual Function devices from the pcibios
bus add device hooks and hot plugged devices from pci_hp_add_devices()
(with other platforms using other methods as well).  Unfortunately,
pSeries machines currently discover hot plugged devices using
pci_rescan_bus(), not pci_hp_add_devices(), and so those devices do
not receive EEH support.

Rather than adding another case for pci_rescan_bus(), this change
widens the scope of the pcibios bus add device hooks so that they can
handle all devices. As a side effect this also supports devices
discovered after manually rescanning via /sys/bus/pci/rescan.

Note that on PowerNV, this change allows the EEH subsystem to become
enabled after boot as long as it has not been forced off, which was
not previously possible (it was already possible on pSeries).

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
---
 arch/powerpc/kernel/eeh.c                    |  2 +-
 arch/powerpc/kernel/of_platform.c            |  3 +-
 arch/powerpc/platforms/powernv/eeh-powernv.c | 39 +++++++++-----
 arch/powerpc/platforms/pseries/eeh_pseries.c | 54 ++++++++++----------
 4 files changed, 56 insertions(+), 42 deletions(-)

diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index ca8b0c58a6a7..87edac6f2fd9 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -1272,7 +1272,7 @@ void eeh_add_device_late(struct pci_dev *dev)
 	struct pci_dn *pdn;
 	struct eeh_dev *edev;
 
-	if (!dev || !eeh_enabled())
+	if (!dev)
 		return;
 
 	pr_debug("EEH: Adding device %s\n", pci_name(dev));
diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c
index 427fc22f72b6..11c807468ab5 100644
--- a/arch/powerpc/kernel/of_platform.c
+++ b/arch/powerpc/kernel/of_platform.c
@@ -81,7 +81,8 @@ static int of_pci_phb_probe(struct platform_device *dev)
 	pcibios_claim_one_bus(phb->bus);
 
 	/* Finish EEH setup */
-	eeh_add_device_tree_late(phb->bus);
+	if (!eeh_has_flag(EEH_FORCE_DISABLED))
+		eeh_add_device_tree_late(phb->bus);
 
 	/* Add probed PCI devices to the device model */
 	pci_bus_add_devices(phb->bus);
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 629f9390d9af..77cc2f51c2ea 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -43,7 +43,7 @@ void pnv_pcibios_bus_add_device(struct pci_dev *pdev)
 {
 	struct pci_dn *pdn = pci_get_pdn(pdev);
 
-	if (!pdev->is_virtfn)
+	if (eeh_has_flag(EEH_FORCE_DISABLED))
 		return;
 
 	pr_debug("%s: EEH: Setting up device %s.\n", __func__, pci_name(pdev));
@@ -222,6 +222,25 @@ static const struct file_operations eeh_tree_state_debugfs_ops = {
 
 #endif /* CONFIG_DEBUG_FS */
 
+void pnv_eeh_enable_phbs(void)
+{
+	struct pci_controller *hose;
+	struct pnv_phb *phb;
+
+	list_for_each_entry(hose, &hose_list, list_node) {
+		phb = hose->private_data;
+		/*
+		 * If EEH is enabled, we're going to rely on that.
+		 * Otherwise, we restore to conventional mechanism
+		 * to clear frozen PE during PCI config access.
+		 */
+		if (eeh_enabled())
+			phb->flags |= PNV_PHB_FLAG_EEH;
+		else
+			phb->flags &= ~PNV_PHB_FLAG_EEH;
+	}
+}
+
 /**
  * pnv_eeh_post_init - EEH platform dependent post initialization
  *
@@ -260,19 +279,11 @@ int pnv_eeh_post_init(void)
 	if (!eeh_enabled())
 		disable_irq(eeh_event_irq);
 
+	pnv_eeh_enable_phbs();
+
 	list_for_each_entry(hose, &hose_list, list_node) {
 		phb = hose->private_data;
 
-		/*
-		 * If EEH is enabled, we're going to rely on that.
-		 * Otherwise, we restore to conventional mechanism
-		 * to clear frozen PE during PCI config access.
-		 */
-		if (eeh_enabled())
-			phb->flags |= PNV_PHB_FLAG_EEH;
-		else
-			phb->flags &= ~PNV_PHB_FLAG_EEH;
-
 		/* Create debugfs entries */
 #ifdef CONFIG_DEBUG_FS
 		if (phb->has_dbgfs || !phb->dbgfs)
@@ -483,7 +494,11 @@ static void *pnv_eeh_probe(struct pci_dn *pdn, void *data)
 	 * Enable EEH explicitly so that we will do EEH check
 	 * while accessing I/O stuff
 	 */
-	eeh_add_flag(EEH_ENABLED);
+	if (!eeh_has_flag(EEH_ENABLED)) {
+		enable_irq(eeh_event_irq);
+		pnv_eeh_enable_phbs();
+		eeh_add_flag(EEH_ENABLED);
+	}
 
 	/* Save memory bars */
 	eeh_save_bars(edev);
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index 31733f6d642c..96ad41fbf96b 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -42,44 +42,44 @@ static int ibm_get_config_addr_info;
 static int ibm_get_config_addr_info2;
 static int ibm_configure_pe;
 
-#ifdef CONFIG_PCI_IOV
 void pseries_pcibios_bus_add_device(struct pci_dev *pdev)
 {
 	struct pci_dn *pdn = pci_get_pdn(pdev);
-	struct pci_dn *physfn_pdn;
-	struct eeh_dev *edev;
 
-	if (!pdev->is_virtfn)
+	if (eeh_has_flag(EEH_FORCE_DISABLED))
 		return;
 
 	pr_debug("%s: EEH: Setting up device %s.\n", __func__, pci_name(pdev));
+#ifdef CONFIG_PCI_IOV
+	if (pdev->is_virtfn) {
+		struct pci_dn *physfn_pdn;
 
-	pdn->device_id  =  pdev->device;
-	pdn->vendor_id  =  pdev->vendor;
-	pdn->class_code =  pdev->class;
-	/*
-	 * Last allow unfreeze return code used for retrieval
-	 * by user space in eeh-sysfs to show the last command
-	 * completion from platform.
-	 */
-	pdn->last_allow_rc =  0;
-	physfn_pdn      =  pci_get_pdn(pdev->physfn);
-	pdn->pe_number  =  physfn_pdn->pe_num_map[pdn->vf_index];
-	edev = pdn_to_eeh_dev(pdn);
-
-	/*
-	 * The following operations will fail if VF's sysfs files
-	 * aren't created or its resources aren't finalized.
-	 */
+		pdn->device_id  =  pdev->device;
+		pdn->vendor_id  =  pdev->vendor;
+		pdn->class_code =  pdev->class;
+		/*
+		 * Last allow unfreeze return code used for retrieval
+		 * by user space in eeh-sysfs to show the last command
+		 * completion from platform.
+		 */
+		pdn->last_allow_rc =  0;
+		physfn_pdn      =  pci_get_pdn(pdev->physfn);
+		pdn->pe_number  =  physfn_pdn->pe_num_map[pdn->vf_index];
+	}
+#endif
 	eeh_add_device_early(pdn);
 	eeh_add_device_late(pdev);
-	edev->pe_config_addr =  (pdn->busno << 16) | (pdn->devfn << 8);
-	eeh_rmv_from_parent_pe(edev); /* Remove as it is adding to bus pe */
-	eeh_add_to_parent_pe(edev);   /* Add as VF PE type */
-	eeh_sysfs_add_device(pdev);
+#ifdef CONFIG_PCI_IOV
+	if (pdev->is_virtfn) {
+		struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
 
-}
+		edev->pe_config_addr =  (pdn->busno << 16) | (pdn->devfn << 8);
+		eeh_rmv_from_parent_pe(edev); /* Remove as it is adding to bus pe */
+		eeh_add_to_parent_pe(edev);   /* Add as VF PE type */
+	}
 #endif
+	eeh_sysfs_add_device(pdev);
+}
 
 /*
  * Buffer for reporting slot-error-detail rtas calls. Its here
@@ -146,10 +146,8 @@ static int pseries_eeh_init(void)
 	/* Set EEH probe mode */
 	eeh_add_flag(EEH_PROBE_MODE_DEVTREE | EEH_ENABLE_IO_FOR_LOG);
 
-#ifdef CONFIG_PCI_IOV
 	/* Set EEH machine dependent code */
 	ppc_md.pcibios_bus_add_device = pseries_pcibios_bus_add_device;
-#endif
 
 	return 0;
 }
-- 
2.22.0.216.g00a2a96fc9

[PATCH v4 6/9] powerpc/eeh: Refactor around eeh_probe_devices()

[Sam Bobroff]

Now that EEH support for all devices (on PowerNV and pSeries) is
provided by the pcibios bus add device hooks, eeh_probe_devices() and
eeh_addr_cache_build() are redundant and can be removed.

Move the EEH enabled message into it's own function so that it can be
called from multiple places.

Note that previously on pSeries, useless EEH sysfs files were created
for some devices that did not have EEH support and this change
prevents them from being created.

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
---
 arch/powerpc/include/asm/eeh.h               |  7 ++---
 arch/powerpc/kernel/eeh.c                    | 27 ++++++-----------
 arch/powerpc/kernel/eeh_cache.c              | 32 --------------------
 arch/powerpc/platforms/powernv/eeh-powernv.c |  4 +--
 arch/powerpc/platforms/pseries/pci.c         |  3 +-
 5 files changed, 14 insertions(+), 59 deletions(-)

diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index 20105964287a..7f9404a0c3bb 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -270,13 +270,12 @@ struct pci_bus *eeh_pe_bus_get(struct eeh_pe *pe);
 
 struct eeh_dev *eeh_dev_init(struct pci_dn *pdn);
 void eeh_dev_phb_init_dynamic(struct pci_controller *phb);
-void eeh_probe_devices(void);
+void eeh_show_enabled(void);
 int __init eeh_ops_register(struct eeh_ops *ops);
 int __exit eeh_ops_unregister(const char *name);
 int eeh_check_failure(const volatile void __iomem *token);
 int eeh_dev_check_failure(struct eeh_dev *edev);
 void eeh_addr_cache_init(void);
-void eeh_addr_cache_build(void);
 void eeh_add_device_early(struct pci_dn *);
 void eeh_add_device_tree_early(struct pci_dn *);
 void eeh_add_device_late(struct pci_dev *);
@@ -320,7 +319,7 @@ static inline bool eeh_enabled(void)
         return false;
 }
 
-static inline void eeh_probe_devices(void) { }
+static inline void eeh_show_enabled(void) { }
 
 static inline void *eeh_dev_init(struct pci_dn *pdn, void *data)
 {
@@ -338,8 +337,6 @@ static inline int eeh_check_failure(const volatile void __iomem *token)
 
 static inline void eeh_addr_cache_init(void) { }
 
-static inline void eeh_addr_cache_build(void) { }
-
 static inline void eeh_add_device_early(struct pci_dn *pdn) { }
 
 static inline void eeh_add_device_tree_early(struct pci_dn *pdn) { }
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 87edac6f2fd9..c0ec1b6b1e69 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -150,6 +150,16 @@ static int __init eeh_setup(char *str)
 }
 __setup("eeh=", eeh_setup);
 
+void eeh_show_enabled(void)
+{
+	if (eeh_has_flag(EEH_FORCE_DISABLED))
+		pr_info("EEH: Recovery disabled by kernel parameter.\n");
+	else if (eeh_has_flag(EEH_ENABLED))
+		pr_info("EEH: Capable adapter found: recovery enabled.\n");
+	else
+		pr_info("EEH: No capable adapters found: recovery disabled.\n");
+}
+
 /*
  * This routine captures assorted PCI configuration space data
  * for the indicated PCI device, and puts them into a buffer
@@ -1143,23 +1153,6 @@ static struct notifier_block eeh_reboot_nb = {
 	.notifier_call = eeh_reboot_notifier,
 };
 
-void eeh_probe_devices(void)
-{
-	struct pci_controller *hose, *tmp;
-	struct pci_dn *pdn;
-
-	/* Enable EEH for all adapters */
-	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
-		pdn = hose->pci_data;
-		traverse_pci_dn(pdn, eeh_ops->probe, NULL);
-	}
-	if (eeh_enabled())
-		pr_info("EEH: PCI Enhanced I/O Error Handling Enabled\n");
-	else
-		pr_info("EEH: No capable adapters found\n");
-
-}
-
 /**
  * eeh_init - EEH initialization
  *
diff --git a/arch/powerpc/kernel/eeh_cache.c b/arch/powerpc/kernel/eeh_cache.c
index a790fa49c62d..8c8649172e97 100644
--- a/arch/powerpc/kernel/eeh_cache.c
+++ b/arch/powerpc/kernel/eeh_cache.c
@@ -265,38 +265,6 @@ void eeh_addr_cache_init(void)
 	spin_lock_init(&pci_io_addr_cache_root.piar_lock);
 }
 
-/**
- * eeh_addr_cache_build - Build a cache of I/O addresses
- *
- * Build a cache of pci i/o addresses.  This cache will be used to
- * find the pci device that corresponds to a given address.
- * This routine scans all pci busses to build the cache.
- * Must be run late in boot process, after the pci controllers
- * have been scanned for devices (after all device resources are known).
- */
-void eeh_addr_cache_build(void)
-{
-	struct pci_dn *pdn;
-	struct eeh_dev *edev;
-	struct pci_dev *dev = NULL;
-
-	for_each_pci_dev(dev) {
-		pdn = pci_get_pdn_by_devfn(dev->bus, dev->devfn);
-		if (!pdn)
-			continue;
-
-		edev = pdn_to_eeh_dev(pdn);
-		if (!edev)
-			continue;
-
-		dev->dev.archdata.edev = edev;
-		edev->pdev = dev;
-
-		eeh_addr_cache_insert_dev(dev);
-		eeh_sysfs_add_device(dev);
-	}
-}
-
 static int eeh_addr_cache_show(struct seq_file *s, void *v)
 {
 	struct pci_io_addr_range *piar;
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 77cc2f51c2ea..7ee0df9ba2c8 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -255,9 +255,7 @@ int pnv_eeh_post_init(void)
 	struct pnv_phb *phb;
 	int ret = 0;
 
-	/* Probe devices & build address cache */
-	eeh_probe_devices();
-	eeh_addr_cache_build();
+	eeh_show_enabled();
 
 	/* Register OPAL event notifier */
 	eeh_event_irq = opal_event_request(ilog2(OPAL_EVENT_PCI_ERROR));
diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c
index 1eae1d09980c..722830978639 100644
--- a/arch/powerpc/platforms/pseries/pci.c
+++ b/arch/powerpc/platforms/pseries/pci.c
@@ -229,8 +229,7 @@ void __init pSeries_final_fixup(void)
 
 	pSeries_request_regions();
 
-	eeh_probe_devices();
-	eeh_addr_cache_build();
+	eeh_show_enabled();
 
 #ifdef CONFIG_PCI_IOV
 	ppc_md.pcibios_sriov_enable = pseries_pcibios_sriov_enable;
-- 
2.22.0.216.g00a2a96fc9

[PATCH v4 7/9] powerpc/eeh: Add bdfn field to eeh_dev

[Sam Bobroff]

From: Oliver O'Halloran <oohall@gmail.com>

Preparation for removing pci_dn from the powernv EEH code. The only
thing we really use pci_dn for is to get the bdfn of the device for
config space accesses, so adding that information to eeh_dev reduces
the need to carry around the pci_dn.

Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
[SB: Re-wrapped commit message, fixed whitespace damage.]
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
---
 arch/powerpc/include/asm/eeh.h     | 2 ++
 arch/powerpc/include/asm/ppc-pci.h | 2 ++
 arch/powerpc/kernel/eeh_dev.c      | 2 ++
 3 files changed, 6 insertions(+)

diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index 7f9404a0c3bb..bbe0798f6624 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -121,6 +121,8 @@ static inline bool eeh_pe_passed(struct eeh_pe *pe)
 struct eeh_dev {
 	int mode;			/* EEH mode			*/
 	int class_code;			/* Class code of the device	*/
+	int bdfn;			/* bdfn of device (for cfg ops) */
+	struct pci_controller *controller;
 	int pe_config_addr;		/* PE config address		*/
 	u32 config_space[16];		/* Saved PCI config space	*/
 	int pcix_cap;			/* Saved PCIx capability	*/
diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h
index cec2d6409515..72860de205a0 100644
--- a/arch/powerpc/include/asm/ppc-pci.h
+++ b/arch/powerpc/include/asm/ppc-pci.h
@@ -74,6 +74,8 @@ static inline const char *eeh_driver_name(struct pci_dev *pdev)
 
 #endif /* CONFIG_EEH */
 
+#define PCI_BUSNO(bdfn) ((bdfn >> 8) & 0xff)
+
 #else /* CONFIG_PCI */
 static inline void init_pci_config_tokens(void) { }
 #endif /* !CONFIG_PCI */
diff --git a/arch/powerpc/kernel/eeh_dev.c b/arch/powerpc/kernel/eeh_dev.c
index c4317c452d98..7370185c7a05 100644
--- a/arch/powerpc/kernel/eeh_dev.c
+++ b/arch/powerpc/kernel/eeh_dev.c
@@ -47,6 +47,8 @@ struct eeh_dev *eeh_dev_init(struct pci_dn *pdn)
 	/* Associate EEH device with OF node */
 	pdn->edev = edev;
 	edev->pdn = pdn;
+	edev->bdfn = (pdn->busno << 8) | pdn->devfn;
+	edev->controller = pdn->phb;
 
 	return edev;
 }
-- 
2.22.0.216.g00a2a96fc9

[PATCH v4 8/9] powerpc/eeh: Introduce EEH edev logging macros

[Sam Bobroff]

Now that struct eeh_dev includes the BDFN of it's PCI device, make use
of it to replace eeh_edev_info() with a set of dev_dbg()-style macros
that only need a struct edev.

With the BDFN available without the struct pci_dev, eeh_pci_name() is
now unnecessary, so remove it.

While only the "info" level function is used here, the others will be
used in followup work.

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
---
 arch/powerpc/include/asm/eeh.h   | 11 +++++++++++
 arch/powerpc/kernel/eeh_driver.c | 17 -----------------
 2 files changed, 11 insertions(+), 17 deletions(-)

diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index bbe0798f6624..e1023a556721 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -138,6 +138,17 @@ struct eeh_dev {
 	struct pci_dev *physfn;		/* Associated SRIOV PF		*/
 };
 
+/* "fmt" must be a simple literal string */
+#define EEH_EDEV_PRINT(level, edev, fmt, ...) \
+	pr_##level("PCI %04x:%02x:%02x.%x#%04x: EEH: " fmt, \
+	(edev)->controller->global_number, PCI_BUSNO((edev)->bdfn), \
+	PCI_SLOT((edev)->bdfn), PCI_FUNC((edev)->bdfn), \
+	((edev)->pe ? (edev)->pe_config_addr : 0xffff), ##__VA_ARGS__)
+#define eeh_edev_dbg(edev, fmt, ...) EEH_EDEV_PRINT(debug, (edev), fmt, ##__VA_ARGS__)
+#define eeh_edev_info(edev, fmt, ...) EEH_EDEV_PRINT(info, (edev), fmt, ##__VA_ARGS__)
+#define eeh_edev_warn(edev, fmt, ...) EEH_EDEV_PRINT(warn, (edev), fmt, ##__VA_ARGS__)
+#define eeh_edev_err(edev, fmt, ...) EEH_EDEV_PRINT(err, (edev), fmt, ##__VA_ARGS__)
+
 static inline struct pci_dn *eeh_dev_to_pdn(struct eeh_dev *edev)
 {
 	return edev ? edev->pdn : NULL;
diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index d6f54840a3a9..29424d5e5fea 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -82,23 +82,6 @@ static const char *pci_ers_result_name(enum pci_ers_result result)
 	}
 };
 
-static __printf(2, 3) void eeh_edev_info(const struct eeh_dev *edev,
-					 const char *fmt, ...)
-{
-	struct va_format vaf;
-	va_list args;
-
-	va_start(args, fmt);
-
-	vaf.fmt = fmt;
-	vaf.va = &args;
-
-	printk(KERN_INFO "EEH: PE#%x (PCI %s): %pV\n", edev->pe_config_addr,
-	       edev->pdev ? dev_name(&edev->pdev->dev) : "none", &vaf);
-
-	va_end(args);
-}
-
 static enum pci_ers_result pci_ers_merge_result(enum pci_ers_result old,
 						enum pci_ers_result new)
 {
-- 
2.22.0.216.g00a2a96fc9

[PATCH v4 9/9] powerpc/eeh: Convert log messages to eeh_edev_* macros

[Sam Bobroff]

Convert existing messages, where appropriate, to use the eeh_edev_*
logging macros.

The only effect should be minor adjustments to the log messages, apart
from:

- A new message in pseries_eeh_probe() "Probing device" to match the
powernv case.
- The "Probing device" message in pnv_eeh_probe() is now generated
slightly later, which will mean that it is no longer emitted for
devices that aren't probed due to the initial checks.

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
---
v4 - Fixed compile warning when compiling without CONFIG_IOV.

 arch/powerpc/include/asm/ppc-pci.h           |  5 --
 arch/powerpc/kernel/eeh.c                    | 19 +++-----
 arch/powerpc/kernel/eeh_cache.c              |  8 +--
 arch/powerpc/kernel/eeh_driver.c             |  7 +--
 arch/powerpc/kernel/eeh_pe.c                 | 51 +++++---------------
 arch/powerpc/platforms/powernv/eeh-powernv.c | 17 ++-----
 arch/powerpc/platforms/pseries/eeh_pseries.c | 21 +++-----
 7 files changed, 39 insertions(+), 89 deletions(-)

diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h
index 72860de205a0..7f4be5a05eb3 100644
--- a/arch/powerpc/include/asm/ppc-pci.h
+++ b/arch/powerpc/include/asm/ppc-pci.h
@@ -62,11 +62,6 @@ void eeh_pe_dev_mode_mark(struct eeh_pe *pe, int mode);
 void eeh_sysfs_add_device(struct pci_dev *pdev);
 void eeh_sysfs_remove_device(struct pci_dev *pdev);
 
-static inline const char *eeh_pci_name(struct pci_dev *pdev) 
-{ 
-	return pdev ? pci_name(pdev) : "<null>";
-} 
-
 static inline const char *eeh_driver_name(struct pci_dev *pdev)
 {
 	return (pdev && pdev->driver) ? pdev->driver->name : "<null>";
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index c0ec1b6b1e69..b6683f367f7f 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -461,8 +461,7 @@ int eeh_dev_check_failure(struct eeh_dev *edev)
 	/* Access to IO BARs might get this far and still not want checking. */
 	if (!pe) {
 		eeh_stats.ignored_check++;
-		pr_debug("EEH: Ignored check for %s\n",
-			eeh_pci_name(dev));
+		eeh_edev_dbg(edev, "Ignored check\n");
 		return 0;
 	}
 
@@ -502,12 +501,11 @@ int eeh_dev_check_failure(struct eeh_dev *edev)
 			if (dn)
 				location = of_get_property(dn, "ibm,loc-code",
 						NULL);
-			printk(KERN_ERR "EEH: %d reads ignored for recovering device at "
-				"location=%s driver=%s pci addr=%s\n",
+			eeh_edev_err(edev, "%d reads ignored for recovering device at location=%s driver=%s\n",
 				pe->check_count,
 				location ? location : "unknown",
-				eeh_driver_name(dev), eeh_pci_name(dev));
-			printk(KERN_ERR "EEH: Might be infinite loop in %s driver\n",
+				eeh_driver_name(dev));
+			eeh_edev_err(edev, "Might be infinite loop in %s driver\n",
 				eeh_driver_name(dev));
 			dump_stack();
 		}
@@ -1268,12 +1266,11 @@ void eeh_add_device_late(struct pci_dev *dev)
 	if (!dev)
 		return;
 
-	pr_debug("EEH: Adding device %s\n", pci_name(dev));
-
 	pdn = pci_get_pdn_by_devfn(dev->bus, dev->devfn);
 	edev = pdn_to_eeh_dev(pdn);
+	eeh_edev_dbg(edev, "Adding device\n");
 	if (edev->pdev == dev) {
-		pr_debug("EEH: Device %s already referenced!\n", pci_name(dev));
+		eeh_edev_dbg(edev, "Device already referenced!\n");
 		return;
 	}
 
@@ -1374,10 +1371,10 @@ void eeh_remove_device(struct pci_dev *dev)
 	edev = pci_dev_to_eeh_dev(dev);
 
 	/* Unregister the device with the EEH/PCI address search system */
-	pr_debug("EEH: Removing device %s\n", pci_name(dev));
+	dev_dbg(&dev->dev, "EEH: Removing device\n");
 
 	if (!edev || !edev->pdev || !edev->pe) {
-		pr_debug("EEH: Not referenced !\n");
+		dev_dbg(&dev->dev, "EEH: Device not referenced!\n");
 		return;
 	}
 
diff --git a/arch/powerpc/kernel/eeh_cache.c b/arch/powerpc/kernel/eeh_cache.c
index 8c8649172e97..45360b9eab90 100644
--- a/arch/powerpc/kernel/eeh_cache.c
+++ b/arch/powerpc/kernel/eeh_cache.c
@@ -145,8 +145,8 @@ eeh_addr_cache_insert(struct pci_dev *dev, resource_size_t alo,
 	piar->pcidev = dev;
 	piar->flags = flags;
 
-	pr_debug("PIAR: insert range=[%pap:%pap] dev=%s\n",
-		 &alo, &ahi, pci_name(dev));
+	eeh_edev_dbg(piar->edev, "PIAR: insert range=[%pap:%pap]\n",
+		 &alo, &ahi);
 
 	rb_link_node(&piar->rb_node, parent, p);
 	rb_insert_color(&piar->rb_node, &pci_io_addr_cache_root.rb_root);
@@ -226,8 +226,8 @@ static inline void __eeh_addr_cache_rmv_dev(struct pci_dev *dev)
 		piar = rb_entry(n, struct pci_io_addr_range, rb_node);
 
 		if (piar->pcidev == dev) {
-			pr_debug("PIAR: remove range=[%pap:%pap] dev=%s\n",
-				 &piar->addr_lo, &piar->addr_hi, pci_name(dev));
+			eeh_edev_dbg(piar->edev, "PIAR: remove range=[%pap:%pap]\n",
+				 &piar->addr_lo, &piar->addr_hi);
 			rb_erase(n, &pci_io_addr_cache_root.rb_root);
 			kfree(piar);
 			goto restart;
diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index 29424d5e5fea..670b6159cef1 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -457,12 +457,9 @@ static void *eeh_add_virt_device(struct eeh_dev *edev)
 {
 	struct pci_driver *driver;
 	struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
-	struct pci_dn *pdn = eeh_dev_to_pdn(edev);
 
 	if (!(edev->physfn)) {
-		pr_warn("%s: EEH dev %04x:%02x:%02x.%01x not for VF\n",
-			__func__, pdn->phb->global_number, pdn->busno,
-			PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn));
+		eeh_edev_warn(edev, "Not for VF\n");
 		return NULL;
 	}
 
@@ -476,7 +473,7 @@ static void *eeh_add_virt_device(struct eeh_dev *edev)
 	}
 
 #ifdef CONFIG_PCI_IOV
-	pci_iov_add_virtfn(edev->physfn, pdn->vf_index);
+	pci_iov_add_virtfn(edev->physfn, eeh_dev_to_pdn(edev)->vf_index);
 #endif
 	return NULL;
 }
diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c
index 854cef7b18f4..317a31624526 100644
--- a/arch/powerpc/kernel/eeh_pe.c
+++ b/arch/powerpc/kernel/eeh_pe.c
@@ -379,8 +379,7 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
 
 	/* Check if the PE number is valid */
 	if (!eeh_has_flag(EEH_VALID_PE_ZERO) && !edev->pe_config_addr) {
-		pr_err("%s: Invalid PE#0 for edev 0x%x on PHB#%x\n",
-		       __func__, config_addr, pdn->phb->global_number);
+		eeh_edev_err(edev, "PE#0 is invalid for this PHB!\n");
 		return -EINVAL;
 	}
 
@@ -398,12 +397,7 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
 
 		/* Put the edev to PE */
 		list_add_tail(&edev->entry, &pe->edevs);
-		pr_debug("EEH: Add %04x:%02x:%02x.%01x to Bus PE#%x\n",
-			 pdn->phb->global_number,
-			 pdn->busno,
-			 PCI_SLOT(pdn->devfn),
-			 PCI_FUNC(pdn->devfn),
-			 pe->addr);
+		eeh_edev_dbg(edev, "Added to bus PE\n");
 		return 0;
 	} else if (pe && (pe->type & EEH_PE_INVALID)) {
 		list_add_tail(&edev->entry, &pe->edevs);
@@ -420,13 +414,8 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
 			parent = parent->parent;
 		}
 
-		pr_debug("EEH: Add %04x:%02x:%02x.%01x to Device "
-			 "PE#%x, Parent PE#%x\n",
-			 pdn->phb->global_number,
-			 pdn->busno,
-			 PCI_SLOT(pdn->devfn),
-			 PCI_FUNC(pdn->devfn),
-			 pe->addr, pe->parent->addr);
+		eeh_edev_dbg(edev, "Added to device PE (parent: PE#%x)\n",
+			     pe->parent->addr);
 		return 0;
 	}
 
@@ -468,13 +457,8 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
 	list_add_tail(&pe->child, &parent->child_list);
 	list_add_tail(&edev->entry, &pe->edevs);
 	edev->pe = pe;
-	pr_debug("EEH: Add %04x:%02x:%02x.%01x to "
-		 "Device PE#%x, Parent PE#%x\n",
-		 pdn->phb->global_number,
-		 pdn->busno,
-		 PCI_SLOT(pdn->devfn),
-		 PCI_FUNC(pdn->devfn),
-		 pe->addr, pe->parent->addr);
+	eeh_edev_dbg(edev, "Added to device PE (parent: PE#%x)\n",
+		     pe->parent->addr);
 
 	return 0;
 }
@@ -492,15 +476,10 @@ int eeh_rmv_from_parent_pe(struct eeh_dev *edev)
 {
 	struct eeh_pe *pe, *parent, *child;
 	int cnt;
-	struct pci_dn *pdn = eeh_dev_to_pdn(edev);
 
 	pe = eeh_dev_to_pe(edev);
 	if (!pe) {
-		pr_debug("%s: No PE found for device %04x:%02x:%02x.%01x\n",
-			 __func__,  pdn->phb->global_number,
-			 pdn->busno,
-			 PCI_SLOT(pdn->devfn),
-			 PCI_FUNC(pdn->devfn));
+		eeh_edev_dbg(edev, "No PE found for device.\n");
 		return -EEXIST;
 	}
 
@@ -717,17 +696,13 @@ static void eeh_bridge_check_link(struct eeh_dev *edev)
 	if (!(edev->mode & (EEH_DEV_ROOT_PORT | EEH_DEV_DS_PORT)))
 		return;
 
-	pr_debug("%s: Check PCIe link for %04x:%02x:%02x.%01x ...\n",
-		 __func__, pdn->phb->global_number,
-		 pdn->busno,
-		 PCI_SLOT(pdn->devfn),
-		 PCI_FUNC(pdn->devfn));
+	eeh_edev_dbg(edev, "Checking PCIe link...\n");
 
 	/* Check slot status */
 	cap = edev->pcie_cap;
 	eeh_ops->read_config(pdn, cap + PCI_EXP_SLTSTA, 2, &val);
 	if (!(val & PCI_EXP_SLTSTA_PDS)) {
-		pr_debug("  No card in the slot (0x%04x) !\n", val);
+		eeh_edev_dbg(edev, "No card in the slot (0x%04x) !\n", val);
 		return;
 	}
 
@@ -736,7 +711,7 @@ static void eeh_bridge_check_link(struct eeh_dev *edev)
 	if (val & PCI_EXP_SLTCAP_PCP) {
 		eeh_ops->read_config(pdn, cap + PCI_EXP_SLTCTL, 2, &val);
 		if (val & PCI_EXP_SLTCTL_PCC) {
-			pr_debug("  In power-off state, power it on ...\n");
+			eeh_edev_dbg(edev, "In power-off state, power it on ...\n");
 			val &= ~(PCI_EXP_SLTCTL_PCC | PCI_EXP_SLTCTL_PIC);
 			val |= (0x0100 & PCI_EXP_SLTCTL_PIC);
 			eeh_ops->write_config(pdn, cap + PCI_EXP_SLTCTL, 2, val);
@@ -752,7 +727,7 @@ static void eeh_bridge_check_link(struct eeh_dev *edev)
 	/* Check link */
 	eeh_ops->read_config(pdn, cap + PCI_EXP_LNKCAP, 4, &val);
 	if (!(val & PCI_EXP_LNKCAP_DLLLARC)) {
-		pr_debug("  No link reporting capability (0x%08x) \n", val);
+		eeh_edev_dbg(edev, "No link reporting capability (0x%08x) \n", val);
 		msleep(1000);
 		return;
 	}
@@ -769,10 +744,10 @@ static void eeh_bridge_check_link(struct eeh_dev *edev)
 	}
 
 	if (val & PCI_EXP_LNKSTA_DLLLA)
-		pr_debug("  Link up (%s)\n",
+		eeh_edev_dbg(edev, "Link up (%s)\n",
 			 (val & PCI_EXP_LNKSTA_CLS_2_5GB) ? "2.5GB" : "5GB");
 	else
-		pr_debug("  Link not ready (0x%04x)\n", val);
+		eeh_edev_dbg(edev, "Link not ready (0x%04x)\n", val);
 }
 
 #define BYTE_SWAP(OFF)	(8*((OFF)/4)+3-(OFF))
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 7ee0df9ba2c8..43c3b7d81794 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -46,7 +46,7 @@ void pnv_pcibios_bus_add_device(struct pci_dev *pdev)
 	if (eeh_has_flag(EEH_FORCE_DISABLED))
 		return;
 
-	pr_debug("%s: EEH: Setting up device %s.\n", __func__, pci_name(pdev));
+	dev_dbg(&pdev->dev, "EEH: Setting up device\n");
 	eeh_add_device_early(pdn);
 	eeh_add_device_late(pdev);
 	eeh_sysfs_add_device(pdev);
@@ -399,10 +399,6 @@ static void *pnv_eeh_probe(struct pci_dn *pdn, void *data)
 	int ret;
 	int config_addr = (pdn->busno << 8) | (pdn->devfn);
 
-	pr_debug("%s: probing %04x:%02x:%02x.%01x\n",
-		__func__, hose->global_number, pdn->busno,
-		PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn));
-
 	/*
 	 * When probing the root bridge, which doesn't have any
 	 * subordinate PCI devices. We don't have OF node for
@@ -416,6 +412,8 @@ static void *pnv_eeh_probe(struct pci_dn *pdn, void *data)
 	if ((pdn->class_code >> 8) == PCI_CLASS_BRIDGE_ISA)
 		return NULL;
 
+	eeh_edev_dbg(edev, "Probing device\n");
+
 	/* Initialize eeh device */
 	edev->class_code = pdn->class_code;
 	edev->mode	&= 0xFFFFFF00;
@@ -441,9 +439,7 @@ static void *pnv_eeh_probe(struct pci_dn *pdn, void *data)
 	/* Create PE */
 	ret = eeh_add_to_parent_pe(edev);
 	if (ret) {
-		pr_warn("%s: Can't add PCI dev %04x:%02x:%02x.%01x to parent PE (%x)\n",
-			__func__, hose->global_number, pdn->busno,
-			PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn), ret);
+		eeh_edev_warn(edev, "Failed to add device to PE (code %d)\n", ret);
 		return NULL;
 	}
 
@@ -501,10 +497,7 @@ static void *pnv_eeh_probe(struct pci_dn *pdn, void *data)
 	/* Save memory bars */
 	eeh_save_bars(edev);
 
-	pr_debug("%s: EEH enabled on %02x:%02x.%01x PHB#%x-PE#%x\n",
-		__func__, pdn->busno, PCI_SLOT(pdn->devfn),
-		PCI_FUNC(pdn->devfn), edev->pe->phb->global_number,
-		edev->pe->addr);
+	eeh_edev_dbg(edev, "EEH enabled on device\n");
 
 	return NULL;
 }
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index 96ad41fbf96b..517982197451 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -49,7 +49,7 @@ void pseries_pcibios_bus_add_device(struct pci_dev *pdev)
 	if (eeh_has_flag(EEH_FORCE_DISABLED))
 		return;
 
-	pr_debug("%s: EEH: Setting up device %s.\n", __func__, pci_name(pdev));
+	dev_dbg(&pdev->dev, "EEH: Setting up device\n");
 #ifdef CONFIG_PCI_IOV
 	if (pdev->is_virtfn) {
 		struct pci_dn *physfn_pdn;
@@ -238,10 +238,6 @@ static void *pseries_eeh_probe(struct pci_dn *pdn, void *data)
 	int enable = 0;
 	int ret;
 
-	pr_debug("%s: probing %04x:%02x:%02x.%01x\n",
-		__func__, pdn->phb->global_number, pdn->busno,
-		PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn));
-
 	/* Retrieve OF node and eeh device */
 	edev = pdn_to_eeh_dev(pdn);
 	if (!edev || edev->pe)
@@ -255,6 +251,8 @@ static void *pseries_eeh_probe(struct pci_dn *pdn, void *data)
         if ((pdn->class_code >> 8) == PCI_CLASS_BRIDGE_ISA)
 		return NULL;
 
+	eeh_edev_dbg(edev, "Probing device\n");
+
 	/*
 	 * Update class code and mode of eeh device. We need
 	 * correctly reflects that current device is root port
@@ -284,12 +282,10 @@ static void *pseries_eeh_probe(struct pci_dn *pdn, void *data)
 	pe.config_addr = (pdn->busno << 16) | (pdn->devfn << 8);
 
 	/* Enable EEH on the device */
+	eeh_edev_dbg(edev, "Enabling EEH on device\n");
 	ret = eeh_ops->set_option(&pe, EEH_OPT_ENABLE);
 	if (ret) {
-		pr_debug("%s: EEH failed to enable on %02x:%02x.%01x PHB#%x-PE#%x (code %d)\n",
-			__func__, pdn->busno, PCI_SLOT(pdn->devfn),
-			PCI_FUNC(pdn->devfn), pe.phb->global_number,
-			pe.addr, ret);
+		eeh_edev_dbg(edev, "EEH failed to enable on device (code %d)\n", ret);
 	} else {
 		/* Retrieve PE address */
 		edev->pe_config_addr = eeh_ops->get_pe_addr(&pe);
@@ -314,11 +310,8 @@ static void *pseries_eeh_probe(struct pci_dn *pdn, void *data)
 			edev->pe_config_addr = pdn_to_eeh_dev(pdn->parent)->pe_config_addr;
 			eeh_add_to_parent_pe(edev);
 		}
-		pr_debug("%s: EEH %s on %02x:%02x.%01x PHB#%x-PE#%x (code %d)\n",
-			__func__, (enable ? "enabled" : "unsupported"),
-			pdn->busno, PCI_SLOT(pdn->devfn),
-			PCI_FUNC(pdn->devfn), pe.phb->global_number,
-			pe.addr, ret);
+		eeh_edev_dbg(edev, "EEH is %s on device (code %d)\n",
+			     (enable ? "enabled" : "unsupported"), ret);
 	}
 
 	/* Save memory bars */
-- 
2.22.0.216.g00a2a96fc9

Re: [PATCH v4 7/9] powerpc/eeh: Add bdfn field to eeh_dev

[Jordan Niethe]

On Wed, 2019-08-07 at 13:44 +1000, Sam Bobroff wrote:
> From: Oliver O'Halloran <oohall@gmail.com>
> 
> Preparation for removing pci_dn from the powernv EEH code. The only
> thing we really use pci_dn for is to get the bdfn of the device for
> config space accesses, so adding that information to eeh_dev reduces
> the need to carry around the pci_dn.
> 
> Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
> [SB: Re-wrapped commit message, fixed whitespace damage.]
> Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
> ---
>  arch/powerpc/include/asm/eeh.h     | 2 ++
>  arch/powerpc/include/asm/ppc-pci.h | 2 ++
>  arch/powerpc/kernel/eeh_dev.c      | 2 ++
>  3 files changed, 6 insertions(+)
> 
> diff --git a/arch/powerpc/include/asm/eeh.h
> b/arch/powerpc/include/asm/eeh.h
> index 7f9404a0c3bb..bbe0798f6624 100644
> --- a/arch/powerpc/include/asm/eeh.h
> +++ b/arch/powerpc/include/asm/eeh.h
> @@ -121,6 +121,8 @@ static inline bool eeh_pe_passed(struct eeh_pe
> *pe)
>  struct eeh_dev {
>  	int mode;			/* EEH mode			*/
>  	int class_code;			/* Class code of the device	
> */
> +	int bdfn;			/* bdfn of device (for cfg ops) */
> +	struct pci_controller *controller;

The other members of the structure get a comment, maybe it would be
more consistant if this one did too?

>  	int pe_config_addr;		/* PE config address		
> */
>  	u32 config_space[16];		/* Saved PCI config space	
> */
>  	int pcix_cap;			/* Saved PCIx capability	
> */
> diff --git a/arch/powerpc/include/asm/ppc-pci.h
> b/arch/powerpc/include/asm/ppc-pci.h
> index cec2d6409515..72860de205a0 100644
> --- a/arch/powerpc/include/asm/ppc-pci.h
> +++ b/arch/powerpc/include/asm/ppc-pci.h
> @@ -74,6 +74,8 @@ static inline const char *eeh_driver_name(struct
> pci_dev *pdev)
>  
>  #endif /* CONFIG_EEH */
>  
> +#define PCI_BUSNO(bdfn) ((bdfn >> 8) & 0xff)
> +
>  #else /* CONFIG_PCI */
>  static inline void init_pci_config_tokens(void) { }
>  #endif /* !CONFIG_PCI */
> diff --git a/arch/powerpc/kernel/eeh_dev.c
> b/arch/powerpc/kernel/eeh_dev.c
> index c4317c452d98..7370185c7a05 100644
> --- a/arch/powerpc/kernel/eeh_dev.c
> +++ b/arch/powerpc/kernel/eeh_dev.c
> @@ -47,6 +47,8 @@ struct eeh_dev *eeh_dev_init(struct pci_dn *pdn)
>  	/* Associate EEH device with OF node */
>  	pdn->edev = edev;
>  	edev->pdn = pdn;
> +	edev->bdfn = (pdn->busno << 8) | pdn->devfn;
> +	edev->controller = pdn->phb;
>  
>  	return edev;
>  }

Re: [PATCH v4 7/9] powerpc/eeh: Add bdfn field to eeh_dev

[Oliver O'Halloran]

On Thu, Aug 8, 2019 at 5:05 PM Jordan Niethe <jniethe5@gmail.com> wrote:
>
> On Wed, 2019-08-07 at 13:44 +1000, Sam Bobroff wrote:
> > From: Oliver O'Halloran <oohall@gmail.com>
> >
> > Preparation for removing pci_dn from the powernv EEH code. The only
> > thing we really use pci_dn for is to get the bdfn of the device for
> > config space accesses, so adding that information to eeh_dev reduces
> > the need to carry around the pci_dn.
> >
> > Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
> > [SB: Re-wrapped commit message, fixed whitespace damage.]
> > Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
> > ---
> >  arch/powerpc/include/asm/eeh.h     | 2 ++
> >  arch/powerpc/include/asm/ppc-pci.h | 2 ++
> >  arch/powerpc/kernel/eeh_dev.c      | 2 ++
> >  3 files changed, 6 insertions(+)
> >
> > diff --git a/arch/powerpc/include/asm/eeh.h
> > b/arch/powerpc/include/asm/eeh.h
> > index 7f9404a0c3bb..bbe0798f6624 100644
> > --- a/arch/powerpc/include/asm/eeh.h
> > +++ b/arch/powerpc/include/asm/eeh.h
> > @@ -121,6 +121,8 @@ static inline bool eeh_pe_passed(struct eeh_pe
> > *pe)
> >  struct eeh_dev {
> >       int mode;                       /* EEH mode                     */
> >       int class_code;                 /* Class code of the device
> > */
> > +     int bdfn;                       /* bdfn of device (for cfg ops) */
> > +     struct pci_controller *controller;
>
> The other members of the structure get a comment, maybe it would be
> more consistant if this one did too?

At some point we need to go through all the EEH documentation /
comments and get rid of everything that is not useful or just straight
up wrong. The comments here are in-offensive, but they mostly just
repeat the information in the variable name so it's hard to see the
value.