linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Daniel Walker <danielwa@cisco.com>
To: Will Deacon <will@kernel.org>,
	Christophe Leroy <christophe.leroy@csgroup.eu>,
	ob Herring <robh@kernel.org>,
	Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>,
	Andrew Morton <akpm@linux-foundation.org>,
	x86@kernel.org, linux-mips@vger.kernel.org,
	linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org, linux-efi@vger.kernel.org,
	Ard Biesheuvel <ardb@kernel.org>,
	xe-linux-external@cisco.com
Subject: [PATCH 6/8] drivers: firmware: efi: libstub: enable generic commandline
Date: Tue, 30 Mar 2021 10:57:01 -0700	[thread overview]
Message-ID: <e5d98d566c38d6f8516b8d9d1fd603ec1f131037.1617126961.git.danielwa@cisco.com> (raw)
In-Reply-To: <41021d66db2ab427c14255d2a24bb4517c8b58fd.1617126961.git.danielwa@cisco.com>

This adds code to handle the generic command line changes.
The efi code appears that it doesn't benefit as much from this design
as it could.

For example, if you had a prepend command line with "nokaslr" then
you might be helpful to re-enable it in the boot loader or dts,
but there appears to be no way to re-enable kaslr or some of the
other options.

Cc: xe-linux-external@cisco.com
Signed-off-by: Daniel Walker <danielwa@cisco.com>
---
 .../firmware/efi/libstub/efi-stub-helper.c    | 35 +++++++++++++++++++
 drivers/firmware/efi/libstub/efi-stub.c       |  7 ++++
 drivers/firmware/efi/libstub/efistub.h        |  1 +
 drivers/firmware/efi/libstub/x86-stub.c       | 13 +++++--
 4 files changed, 54 insertions(+), 2 deletions(-)

diff --git a/drivers/firmware/efi/libstub/efi-stub-helper.c b/drivers/firmware/efi/libstub/efi-stub-helper.c
index aa8da0a49829..c155837cedc9 100644
--- a/drivers/firmware/efi/libstub/efi-stub-helper.c
+++ b/drivers/firmware/efi/libstub/efi-stub-helper.c
@@ -13,6 +13,7 @@
 #include <linux/efi.h>
 #include <linux/kernel.h>
 #include <linux/printk.h> /* For CONSOLE_LOGLEVEL_* */
+#include <linux/cmdline.h>
 #include <asm/efi.h>
 #include <asm/setup.h>
 
@@ -172,6 +173,40 @@ int efi_printk(const char *fmt, ...)
 	return printed;
 }
 
+/**
+ * efi_handle_cmdline() - handle adding in building parts of the command line
+ * @cmdline:	kernel command line
+ *
+ * Add in the generic parts of the commandline and start the parsing of the
+ * command line.
+ *
+ * Return:	status code
+ */
+efi_status_t efi_handle_cmdline(char const *cmdline)
+{
+	efi_status_t status;
+
+	status = efi_parse_options(CMDLINE_PREPEND);
+	if (status != EFI_SUCCESS) {
+		efi_err("Failed to parse options\n");
+		return status;
+	}
+
+	status = efi_parse_options(IS_ENABLED(CONFIG_CMDLINE_OVERRIDE) ? "" : cmdline);
+	if (status != EFI_SUCCESS) {
+		efi_err("Failed to parse options\n");
+		return status;
+	}
+
+	status = efi_parse_options(CMDLINE_APPEND);
+	if (status != EFI_SUCCESS) {
+		efi_err("Failed to parse options\n");
+		return status;
+	}
+
+	return EFI_SUCCESS;
+}
+
 /**
  * efi_parse_options() - Parse EFI command line options
  * @cmdline:	kernel command line
diff --git a/drivers/firmware/efi/libstub/efi-stub.c b/drivers/firmware/efi/libstub/efi-stub.c
index 26e69788f27a..760480248adf 100644
--- a/drivers/firmware/efi/libstub/efi-stub.c
+++ b/drivers/firmware/efi/libstub/efi-stub.c
@@ -172,6 +172,12 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
 		goto fail;
 	}
 
+#ifdef CONFIG_GENERIC_CMDLINE
+	status = efi_handle_cmdline(cmdline_ptr);
+	if (status != EFI_SUCCESS) {
+		goto fail_free_cmdline;
+	}
+#else
 	if (IS_ENABLED(CONFIG_CMDLINE_EXTEND) ||
 	    IS_ENABLED(CONFIG_CMDLINE_FORCE) ||
 	    cmdline_size == 0) {
@@ -189,6 +195,7 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
 			goto fail_free_cmdline;
 		}
 	}
+#endif
 
 	efi_info("Booting Linux Kernel...\n");
 
diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h
index cde0a2ef507d..07c7f9fdfffc 100644
--- a/drivers/firmware/efi/libstub/efistub.h
+++ b/drivers/firmware/efi/libstub/efistub.h
@@ -800,6 +800,7 @@ efi_status_t efi_relocate_kernel(unsigned long *image_addr,
 				 unsigned long alignment,
 				 unsigned long min_addr);
 
+efi_status_t efi_handle_cmdline(char const *cmdline);
 efi_status_t efi_parse_options(char const *cmdline);
 
 void efi_parse_option_graphics(char *option);
diff --git a/drivers/firmware/efi/libstub/x86-stub.c b/drivers/firmware/efi/libstub/x86-stub.c
index f14c4ff5839f..30ad8fb7122d 100644
--- a/drivers/firmware/efi/libstub/x86-stub.c
+++ b/drivers/firmware/efi/libstub/x86-stub.c
@@ -673,6 +673,8 @@ unsigned long efi_main(efi_handle_t handle,
 	unsigned long bzimage_addr = (unsigned long)startup_32;
 	unsigned long buffer_start, buffer_end;
 	struct setup_header *hdr = &boot_params->hdr;
+	unsigned long cmdline_paddr = ((u64)hdr->cmd_line_ptr |
+				       ((u64)boot_params->ext_cmd_line_ptr << 32));
 	efi_status_t status;
 
 	efi_system_table = sys_table_arg;
@@ -735,6 +737,14 @@ unsigned long efi_main(efi_handle_t handle,
 		image_offset = 0;
 	}
 
+#ifdef CONFIG_GENERIC_CMDLINE
+	status = efi_handle_cmdline((char *)cmdline_paddr);
+	if (status != EFI_SUCCESS) {
+		efi_err("Failed to parse options\n");
+		goto fail;
+	}
+#else /* CONFIG_GENERIC_CMDLINE */
+
 #ifdef CONFIG_CMDLINE_BOOL
 	status = efi_parse_options(CONFIG_CMDLINE);
 	if (status != EFI_SUCCESS) {
@@ -743,8 +753,6 @@ unsigned long efi_main(efi_handle_t handle,
 	}
 #endif
 	if (!IS_ENABLED(CONFIG_CMDLINE_OVERRIDE)) {
-		unsigned long cmdline_paddr = ((u64)hdr->cmd_line_ptr |
-					       ((u64)boot_params->ext_cmd_line_ptr << 32));
 		status = efi_parse_options((char *)cmdline_paddr);
 		if (status != EFI_SUCCESS) {
 			efi_err("Failed to parse options\n");
@@ -752,6 +760,7 @@ unsigned long efi_main(efi_handle_t handle,
 		}
 	}
 
+#endif
 	/*
 	 * At this point, an initrd may already have been loaded by the
 	 * bootloader and passed via bootparams. We permit an initrd loaded
-- 
2.25.1


  parent reply	other threads:[~2021-03-30 18:00 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-30 17:56 [PATCH 1/8] CMDLINE: add generic builtin command line Daniel Walker
2021-03-30 17:56 ` [PATCH 2/8] CMDLINE: drivers: of: ifdef out cmdline section Daniel Walker
2021-03-30 19:49   ` Rob Herring
2021-03-30 23:17     ` Daniel Walker
2021-04-07 22:59       ` Rob Herring
2021-04-09  1:26         ` Daniel Walker
2021-04-02 17:32   ` Christophe Leroy
2021-04-06 16:35     ` Daniel Walker
2021-03-30 17:56 ` [PATCH 3/8] powerpc: convert strcpy to strlcpy in prom_init Daniel Walker
2021-04-02 17:32   ` Christophe Leroy
2021-03-30 17:56 ` [PATCH 4/8] CMDLINE: powerpc: convert to generic builtin command line Daniel Walker
2021-04-02 17:34   ` Christophe Leroy
2021-04-06 16:38     ` Daniel Walker
2021-03-30 17:57 ` [PATCH 5/8] CMDLINE: mips: " Daniel Walker
2021-03-30 17:57 ` Daniel Walker [this message]
2021-03-31 16:10   ` [PATCH 6/8] drivers: firmware: efi: libstub: enable generic commandline Ard Biesheuvel
2021-03-31 18:21     ` Daniel Walker
2021-04-02 17:36   ` Christophe Leroy
2021-04-06 16:42     ` Daniel Walker
2021-03-30 17:57 ` [PATCH 7/8] CMDLINE: x86: convert to generic builtin command line Daniel Walker
2021-03-30 17:57 ` [PATCH 8/8] CMDLINE: arm64: " Daniel Walker
2021-04-02 17:28 ` [PATCH 1/8] CMDLINE: add " Christophe Leroy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e5d98d566c38d6f8516b8d9d1fd603ec1f131037.1617126961.git.danielwa@cisco.com \
    --to=danielwa@cisco.com \
    --cc=akpm@linux-foundation.org \
    --cc=ardb@kernel.org \
    --cc=christophe.leroy@csgroup.eu \
    --cc=daniel@gimpelevich.san-francisco.ca.us \
    --cc=linux-efi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=robh@kernel.org \
    --cc=will@kernel.org \
    --cc=x86@kernel.org \
    --cc=xe-linux-external@cisco.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).