linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: "Russell Currey" <ruscur@russell.cc>
To: "Christophe Leroy" <christophe.leroy@c-s.fr>,
	linuxppc-dev@lists.ozlabs.org
Cc: Julia.Lawall@lip6.fr, rashmica.g@gmail.com
Subject: Re: [PATCH 1/2] powerpc/mm/ptdump: Wrap seq_printf() to handle NULL pointers
Date: Wed, 24 Apr 2019 03:00:33 -0400	[thread overview]
Message-ID: <e867dde6-ec13-4a3f-aa66-9819066dcb80@www.fastmail.com> (raw)
In-Reply-To: <ab20f079-cf9f-f1c6-f3fa-54a842311fd3@c-s.fr>

whoops, will fix 

-- 
  Russell Currey
  ruscur@russell.cc

On Wed, Apr 24, 2019, at 4:56 PM, Christophe Leroy wrote:
> 
> 
> Le 24/04/2019 à 08:39, Russell Currey a écrit :
> > Lovingly borrowed from the arch/arm64 ptdump code.
> > 
> > This doesn't seem to be an issue in practice, but is necessary for my
> > upcoming commit.
> > 
> > Converts a putc() into a puts().
> > 
> > Signed-off-by: Russell Currey <ruscur@russell.cc>
> > ---
> >   arch/powerpc/mm/ptdump/ptdump.c | 32 ++++++++++++++++++++++----------
> >   1 file changed, 22 insertions(+), 10 deletions(-)
> > 
> > diff --git a/arch/powerpc/mm/ptdump/ptdump.c b/arch/powerpc/mm/ptdump/ptdump.c
> > index 37138428ab55..c50cb7faa334 100644
> > --- a/arch/powerpc/mm/ptdump/ptdump.c
> > +++ b/arch/powerpc/mm/ptdump/ptdump.c
> > @@ -104,6 +104,18 @@ static struct addr_marker address_markers[] = {
> >   	{ -1,	NULL },
> >   };
> >   
> > +#define pt_dump_seq_printf(m, fmt, args...)	\
> > +({						\
> > +	if (m)					\
> > +		seq_printf(m, fmt, ##args);	\
> > +})
> > +
> > +#define pt_dump_seq_puts(m, fmt)	\
> > +({					\
> > +	if (m)				\
> > +		seq_printf(m, fmt);	\
> 
> Why not use seq_puts() here ?
> 
> Christophe
> 
> > +})
> > +
> >   static void dump_flag_info(struct pg_state *st, const struct flag_info
> >   		*flag, u64 pte, int num)
> >   {
> > @@ -121,19 +133,19 @@ static void dump_flag_info(struct pg_state *st, const struct flag_info
> >   			val = pte & flag->val;
> >   			if (flag->shift)
> >   				val = val >> flag->shift;
> > -			seq_printf(st->seq, "  %s:%llx", flag->set, val);
> > +			pt_dump_seq_printf(st->seq, "  %s:%llx", flag->set, val);
> >   		} else {
> >   			if ((pte & flag->mask) == flag->val)
> >   				s = flag->set;
> >   			else
> >   				s = flag->clear;
> >   			if (s)
> > -				seq_printf(st->seq, "  %s", s);
> > +				pt_dump_seq_printf(st->seq, "  %s", s);
> >   		}
> >   		st->current_flags &= ~flag->mask;
> >   	}
> >   	if (st->current_flags != 0)
> > -		seq_printf(st->seq, "  unknown flags:%llx", st->current_flags);
> > +		pt_dump_seq_printf(st->seq, "  unknown flags:%llx", st->current_flags);
> >   }
> >   
> >   static void dump_addr(struct pg_state *st, unsigned long addr)
> > @@ -148,12 +160,12 @@ static void dump_addr(struct pg_state *st, unsigned long addr)
> >   #define REG		"0x%08lx"
> >   #endif
> >   
> > -	seq_printf(st->seq, REG "-" REG " ", st->start_address, addr - 1);
> > +	pt_dump_seq_printf(st->seq, REG "-" REG " ", st->start_address, addr - 1);
> >   	if (st->start_pa == st->last_pa && st->start_address + PAGE_SIZE != addr) {
> > -		seq_printf(st->seq, "[" REG "]", st->start_pa);
> > +		pt_dump_seq_printf(st->seq, "[" REG "]", st->start_pa);
> >   		delta = PAGE_SIZE >> 10;
> >   	} else {
> > -		seq_printf(st->seq, " " REG " ", st->start_pa);
> > +		pt_dump_seq_printf(st->seq, " " REG " ", st->start_pa);
> >   		delta = (addr - st->start_address) >> 10;
> >   	}
> >   	/* Work out what appropriate unit to use */
> > @@ -161,7 +173,7 @@ static void dump_addr(struct pg_state *st, unsigned long addr)
> >   		delta >>= 10;
> >   		unit++;
> >   	}
> > -	seq_printf(st->seq, "%9lu%c", delta, *unit);
> > +	pt_dump_seq_printf(st->seq, "%9lu%c", delta, *unit);
> >   
> >   }
> >   
> > @@ -178,7 +190,7 @@ static void note_page(struct pg_state *st, unsigned long addr,
> >   		st->start_address = addr;
> >   		st->start_pa = pa;
> >   		st->last_pa = pa;
> > -		seq_printf(st->seq, "---[ %s ]---\n", st->marker->name);
> > +		pt_dump_seq_printf(st->seq, "---[ %s ]---\n", st->marker->name);
> >   	/*
> >   	 * Dump the section of virtual memory when:
> >   	 *   - the PTE flags from one entry to the next differs.
> > @@ -202,7 +214,7 @@ static void note_page(struct pg_state *st, unsigned long addr,
> >   					  st->current_flags,
> >   					  pg_level[st->level].num);
> >   
> > -			seq_putc(st->seq, '\n');
> > +			pt_dump_seq_puts(st->seq, "\n");
> >   		}
> >   
> >   		/*
> > @@ -211,7 +223,7 @@ static void note_page(struct pg_state *st, unsigned long addr,
> >   		 */
> >   		while (addr >= st->marker[1].start_address) {
> >   			st->marker++;
> > -			seq_printf(st->seq, "---[ %s ]---\n", st->marker->name);
> > +			pt_dump_seq_printf(st->seq, "---[ %s ]---\n", st->marker->name);
> >   		}
> >   		st->start_address = addr;
> >   		st->start_pa = pa;
> > 
>

      reply	other threads:[~2019-04-24  7:02 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-24  6:39 [PATCH 1/2] powerpc/mm/ptdump: Wrap seq_printf() to handle NULL pointers Russell Currey
2019-04-24  6:39 ` [PATCH 2/2] powerpc/mm: Warn if W+X pages found on boot Russell Currey
2019-04-24  7:14   ` Christophe Leroy
2019-05-01  7:04     ` Russell Currey
2019-05-02  5:23       ` Christophe Leroy
2019-05-02  5:51         ` Russell Currey
2019-08-09 13:11           ` Christophe Leroy
2019-04-24  6:56 ` [PATCH 1/2] powerpc/mm/ptdump: Wrap seq_printf() to handle NULL pointers Christophe Leroy
2019-04-24  7:00   ` Russell Currey [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e867dde6-ec13-4a3f-aa66-9819066dcb80@www.fastmail.com \
    --to=ruscur@russell.cc \
    --cc=Julia.Lawall@lip6.fr \
    --cc=christophe.leroy@c-s.fr \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=rashmica.g@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).