From: syzbot <syzbot+e29d28728f38190cecfc@syzkaller.appspotmail.com>
To: hdanton@sina.com, linux-kernel@vger.kernel.org,
syzkaller-bugs@googlegroups.com
Subject: Re: [syzbot] KASAN: use-after-free Read in snd_pcm_post_stop
Date: Tue, 17 Jan 2023 18:59:15 -0800 [thread overview]
Message-ID: <0000000000006d079c05f2810010@google.com> (raw)
In-Reply-To: <20230118023942.2716-1-hdanton@sina.com>
Hello,
syzbot has tested the proposed patch but the reproducer is still triggering an issue:
KASAN: use-after-free Read in tctx_task_work
==================================================================
BUG: KASAN: use-after-free in io_fallback_tw io_uring/io_uring.c:1252 [inline]
BUG: KASAN: use-after-free in tctx_task_work.cold+0x10a/0x11d io_uring/io_uring.c:1222
Read of size 8 at addr ffff888024f00948 by task syz-executor.0/5598
CPU: 1 PID: 5598 Comm: syz-executor.0 Not tainted 6.2.0-rc3-next-20230112-syzkaller-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:306 [inline]
print_report+0x15e/0x45d mm/kasan/report.c:417
kasan_report+0xc0/0xf0 mm/kasan/report.c:517
io_fallback_tw io_uring/io_uring.c:1252 [inline]
tctx_task_work.cold+0x10a/0x11d io_uring/io_uring.c:1222
task_work_run+0x16f/0x270 kernel/task_work.c:179
exit_task_work include/linux/task_work.h:38 [inline]
do_exit+0xb17/0x2a90 kernel/exit.c:867
do_group_exit+0xd4/0x2a0 kernel/exit.c:1012
get_signal+0x225f/0x24f0 kernel/signal.c:2859
arch_do_signal_or_restart+0x79/0x5c0 arch/x86/kernel/signal.c:306
exit_to_user_mode_loop kernel/entry/common.c:168 [inline]
exit_to_user_mode_prepare+0x11f/0x240 kernel/entry/common.c:204
__syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline]
syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:297
do_syscall_64+0x46/0xb0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7ff84e88c0c9
Code: Unable to access opcode bytes at 0x7ff84e88c09f.
RSP: 002b:00007ff84f57d168 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: fffffffffffffe00 RBX: 00007ff84e9abf80 RCX: 00007ff84e88c0c9
RDX: 0000000000002020 RSI: 00000000200021c0 RDI: 0000000000000006
RBP: 00007ff84e8e7ae9 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffd739e0c8f R14: 00007ff84f57d300 R15: 0000000000022000
</TASK>
Allocated by task 5598:
kasan_save_stack+0x22/0x40 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
__kasan_slab_alloc+0x7f/0x90 mm/kasan/common.c:325
kasan_slab_alloc include/linux/kasan.h:186 [inline]
slab_post_alloc_hook mm/slab.h:769 [inline]
kmem_cache_alloc_bulk+0x3aa/0x730 mm/slub.c:4033
__io_alloc_req_refill+0xcc/0x40b io_uring/io_uring.c:1063
io_alloc_req_refill io_uring/io_uring.h:348 [inline]
io_submit_sqes.cold+0x7c/0xc2 io_uring/io_uring.c:2409
__do_sys_io_uring_enter+0x9e4/0x2c10 io_uring/io_uring.c:3433
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 9:
kasan_save_stack+0x22/0x40 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
kasan_save_free_info+0x2e/0x40 mm/kasan/generic.c:518
____kasan_slab_free mm/kasan/common.c:236 [inline]
____kasan_slab_free+0x160/0x1c0 mm/kasan/common.c:200
kasan_slab_free include/linux/kasan.h:162 [inline]
slab_free_hook mm/slub.c:1781 [inline]
slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1807
slab_free mm/slub.c:3787 [inline]
kmem_cache_free+0xec/0x4e0 mm/slub.c:3809
io_req_caches_free+0x1c4/0x201 io_uring/io_uring.c:2741
io_ring_exit_work+0x2e7/0xc80 io_uring/io_uring.c:2971
process_one_work+0x9bf/0x1750 kernel/workqueue.c:2293
worker_thread+0x669/0x1090 kernel/workqueue.c:2440
kthread+0x2e8/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
The buggy address belongs to the object at ffff888024f008c0
which belongs to the cache io_kiocb of size 224
The buggy address is located 136 bytes inside of
224-byte region [ffff888024f008c0, ffff888024f009a0)
The buggy address belongs to the physical page:
page:ffffea000093c000 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x24f00
memcg:ffff88801264c781
flags: 0xfff00000000200(slab|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000000200 ffff88814614c640 dead000000000122 0000000000000000
raw: 0000000000000000 00000000800c000c 00000001ffffffff ffff88801264c781
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Unmovable, gfp_mask 0x112cc0(GFP_USER|__GFP_NOWARN|__GFP_NORETRY), pid 5598, tgid 5597 (syz-executor.0), ts 86881423641, free_ts 86232019510
prep_new_page mm/page_alloc.c:2549 [inline]
get_page_from_freelist+0x11bb/0x2d50 mm/page_alloc.c:4324
__alloc_pages+0x1cb/0x5c0 mm/page_alloc.c:5590
alloc_pages+0x1aa/0x270 mm/mempolicy.c:2281
alloc_slab_page mm/slub.c:1851 [inline]
allocate_slab+0x25f/0x350 mm/slub.c:1998
new_slab mm/slub.c:2051 [inline]
___slab_alloc+0xa91/0x1400 mm/slub.c:3193
__kmem_cache_alloc_bulk mm/slub.c:3951 [inline]
kmem_cache_alloc_bulk+0x23d/0x730 mm/slub.c:4026
__io_alloc_req_refill+0xcc/0x40b io_uring/io_uring.c:1063
io_alloc_req_refill io_uring/io_uring.h:348 [inline]
io_submit_sqes.cold+0x7c/0xc2 io_uring/io_uring.c:2409
__do_sys_io_uring_enter+0x9e4/0x2c10 io_uring/io_uring.c:3433
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
page last free stack trace:
reset_page_owner include/linux/page_owner.h:24 [inline]
free_pages_prepare mm/page_alloc.c:1451 [inline]
free_pcp_prepare+0x4d0/0x910 mm/page_alloc.c:1501
free_unref_page_prepare mm/page_alloc.c:3387 [inline]
free_unref_page_list+0x176/0xcd0 mm/page_alloc.c:3528
release_pages+0xcb1/0x1330 mm/swap.c:1072
tlb_batch_pages_flush+0xa8/0x1a0 mm/mmu_gather.c:97
tlb_flush_mmu_free mm/mmu_gather.c:292 [inline]
tlb_flush_mmu mm/mmu_gather.c:299 [inline]
tlb_finish_mmu+0x14b/0x7e0 mm/mmu_gather.c:391
exit_mmap+0x202/0x7c0 mm/mmap.c:3100
__mmput+0x128/0x4c0 kernel/fork.c:1212
mmput+0x60/0x70 kernel/fork.c:1234
exit_mm kernel/exit.c:563 [inline]
do_exit+0x9ac/0x2a90 kernel/exit.c:854
do_group_exit+0xd4/0x2a0 kernel/exit.c:1012
__do_sys_exit_group kernel/exit.c:1023 [inline]
__se_sys_exit_group kernel/exit.c:1021 [inline]
__x64_sys_exit_group+0x3e/0x50 kernel/exit.c:1021
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Memory state around the buggy address:
ffff888024f00800: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
ffff888024f00880: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
>ffff888024f00900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888024f00980: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
ffff888024f00a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Tested on:
commit: 0a093b28 Add linux-next specific files for 20230112
git tree: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
console output: https://syzkaller.appspot.com/x/log.txt?x=11d23496480000
kernel config: https://syzkaller.appspot.com/x/.config?x=835f3591019836d5
dashboard link: https://syzkaller.appspot.com/bug?extid=e29d28728f38190cecfc
compiler: gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2
patch: https://syzkaller.appspot.com/x/patch.diff?x=11b23c41480000
next parent reply other threads:[~2023-01-18 2:59 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20230118023942.2716-1-hdanton@sina.com>
2023-01-18 2:59 ` syzbot [this message]
[not found] <20230201233318.593-1-hdanton@sina.com>
2023-02-02 5:24 ` [syzbot] KASAN: use-after-free Read in snd_pcm_post_stop syzbot
[not found] <20230119081633.3470-1-hdanton@sina.com>
2023-02-01 16:41 ` syzbot
[not found] <20230119030102.3388-1-hdanton@sina.com>
2023-01-19 3:18 ` syzbot
[not found] <20230119012145.3304-1-hdanton@sina.com>
2023-01-19 2:01 ` syzbot
[not found] <20230118222858.3127-1-hdanton@sina.com>
2023-01-19 1:13 ` syzbot
[not found] <20230118150448.3071-1-hdanton@sina.com>
2023-01-18 15:27 ` syzbot
[not found] <20230118094915.2906-1-hdanton@sina.com>
2023-01-18 14:07 ` syzbot
[not found] <20230118055330.2780-1-hdanton@sina.com>
2023-01-18 7:06 ` syzbot
[not found] <20230117093837.2433-1-hdanton@sina.com>
2023-01-17 17:54 ` syzbot
[not found] <20230117015907.2238-1-hdanton@sina.com>
2023-01-17 2:39 ` syzbot
[not found] <20230116053340.1952-1-hdanton@sina.com>
2023-01-16 12:44 ` syzbot
[not found] <20230116012417.1876-1-hdanton@sina.com>
2023-01-16 1:55 ` syzbot
[not found] <20230116000718.1809-1-hdanton@sina.com>
2023-01-16 0:34 ` syzbot
[not found] <20230115232650.1752-1-hdanton@sina.com>
2023-01-15 23:43 ` syzbot
[not found] <20230115220938.1677-1-hdanton@sina.com>
2023-01-15 22:31 ` syzbot
[not found] <20230115122106.1614-1-hdanton@sina.com>
2023-01-15 16:04 ` syzbot
[not found] <20230115074631.1541-1-hdanton@sina.com>
2023-01-15 8:06 ` syzbot
[not found] <20230113113404.879-1-hdanton@sina.com>
2023-01-13 11:59 ` syzbot
2023-01-13 7:30 syzbot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0000000000006d079c05f2810010@google.com \
--to=syzbot+e29d28728f38190cecfc@syzkaller.appspotmail.com \
--cc=hdanton@sina.com \
--cc=linux-kernel@vger.kernel.org \
--cc=syzkaller-bugs@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).