linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: syzbot <syzbot+9c3492b27d10dc49ffa6@syzkaller.appspotmail.com>
To: asml.silence@gmail.com, axboe@kernel.dk,
	io-uring@vger.kernel.org, linux-kernel@vger.kernel.org,
	syzkaller-bugs@googlegroups.com
Subject: Re: [syzbot] KASAN: use-after-free Read in tctx_task_work (2)
Date: Thu, 19 Aug 2021 03:44:07 -0700	[thread overview]
Message-ID: <000000000000fc001d05c9e73a85@google.com> (raw)
In-Reply-To: <858d47f0-48d5-fff5-24bb-346ebde4e127@gmail.com>

Hello,

syzbot has tested the proposed patch but the reproducer is still triggering an issue:
KASAN: use-after-free Read in tctx_task_work

==================================================================
BUG: KASAN: use-after-free in ctx_flush_and_put fs/io_uring.c:2002 [inline]
BUG: KASAN: use-after-free in tctx_task_work+0x307/0x310 fs/io_uring.c:2049
Read of size 4 at addr ffff888029d66358 by task syz-executor530/27775

CPU: 0 PID: 27775 Comm: syz-executor530 Not tainted 5.14.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:105
 print_address_description.constprop.0.cold+0x6c/0x309 mm/kasan/report.c:233
 __kasan_report mm/kasan/report.c:419 [inline]
 kasan_report.cold+0x83/0xdf mm/kasan/report.c:436
 ctx_flush_and_put fs/io_uring.c:2002 [inline]
 tctx_task_work+0x307/0x310 fs/io_uring.c:2049
 task_work_run+0xdd/0x1a0 kernel/task_work.c:164
 exit_task_work include/linux/task_work.h:32 [inline]
 do_exit+0xbae/0x2a30 kernel/exit.c:825
 do_group_exit+0x125/0x310 kernel/exit.c:922
 get_signal+0x47f/0x2160 kernel/signal.c:2808
 arch_do_signal_or_restart+0x2a9/0x1c40 arch/x86/kernel/signal.c:865
 handle_signal_work kernel/entry/common.c:148 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:172 [inline]
 exit_to_user_mode_prepare+0x17d/0x290 kernel/entry/common.c:209
 __syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline]
 syscall_exit_to_user_mode+0x19/0x60 kernel/entry/common.c:302
 do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x446729
Code: Unable to access opcode bytes at RIP 0x4466ff.
RSP: 002b:00007fada1a521e8 EFLAGS: 00000246 ORIG_RAX: 00000000000001aa
RAX: 00000000000001d2 RBX: 00000000004cb458 RCX: 0000000000446729
RDX: 0000000000000000 RSI: 0000000000006b46 RDI: 0000000000000006
RBP: 00000000004cb450 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004cb45c
R13: 00007ffff39bb49f R14: 00007fada1a52300 R15: 0000000000022000

Allocated by task 27776:
 kasan_save_stack+0x1b/0x40 mm/kasan/common.c:38
 kasan_set_track mm/kasan/common.c:46 [inline]
 set_alloc_info mm/kasan/common.c:434 [inline]
 ____kasan_kmalloc mm/kasan/common.c:513 [inline]
 ____kasan_kmalloc mm/kasan/common.c:472 [inline]
 __kasan_kmalloc+0x9b/0xd0 mm/kasan/common.c:522
 kmalloc include/linux/slab.h:591 [inline]
 kzalloc include/linux/slab.h:721 [inline]
 io_ring_ctx_alloc fs/io_uring.c:1206 [inline]
 io_uring_create fs/io_uring.c:9685 [inline]
 io_uring_setup+0x27d/0x2cf0 fs/io_uring.c:9791
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Freed by task 10491:
 kasan_save_stack+0x1b/0x40 mm/kasan/common.c:38
 kasan_set_track+0x1c/0x30 mm/kasan/common.c:46
 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:360
 ____kasan_slab_free mm/kasan/common.c:366 [inline]
 ____kasan_slab_free mm/kasan/common.c:328 [inline]
 __kasan_slab_free+0xfb/0x130 mm/kasan/common.c:374
 kasan_slab_free include/linux/kasan.h:230 [inline]
 slab_free_hook mm/slub.c:1625 [inline]
 slab_free_freelist_hook+0xdf/0x240 mm/slub.c:1650
 slab_free mm/slub.c:3210 [inline]
 kfree+0xe4/0x530 mm/slub.c:4264
 io_ring_ctx_free fs/io_uring.c:8712 [inline]
 io_ring_exit_work+0x13ba/0x1930 fs/io_uring.c:8861
 process_one_work+0x98d/0x1630 kernel/workqueue.c:2276
 worker_thread+0x658/0x11f0 kernel/workqueue.c:2422
 kthread+0x3e5/0x4d0 kernel/kthread.c:319
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295

Last potentially related work creation:
 kasan_save_stack+0x1b/0x40 mm/kasan/common.c:38
 kasan_record_aux_stack+0xe5/0x110 mm/kasan/generic.c:348
 insert_work+0x48/0x370 kernel/workqueue.c:1332
 __queue_work+0x5c1/0xed0 kernel/workqueue.c:1498
 queue_work_on+0xee/0x110 kernel/workqueue.c:1525
 queue_work include/linux/workqueue.h:507 [inline]
 io_ring_ctx_wait_and_kill+0x30a/0x3c0 fs/io_uring.c:8914
 io_uring_release+0x3e/0x50 fs/io_uring.c:8922
 __fput+0x288/0x920 fs/file_table.c:280
 task_work_run+0xdd/0x1a0 kernel/task_work.c:164
 exit_task_work include/linux/task_work.h:32 [inline]
 do_exit+0xbae/0x2a30 kernel/exit.c:825
 do_group_exit+0x125/0x310 kernel/exit.c:922
 get_signal+0x47f/0x2160 kernel/signal.c:2808
 arch_do_signal_or_restart+0x2a9/0x1c40 arch/x86/kernel/signal.c:865
 handle_signal_work kernel/entry/common.c:148 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:172 [inline]
 exit_to_user_mode_prepare+0x17d/0x290 kernel/entry/common.c:209
 __syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline]
 syscall_exit_to_user_mode+0x19/0x60 kernel/entry/common.c:302
 do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Second to last potentially related work creation:
 kasan_save_stack+0x1b/0x40 mm/kasan/common.c:38
 kasan_record_aux_stack+0xe5/0x110 mm/kasan/generic.c:348
 insert_work+0x48/0x370 kernel/workqueue.c:1332
 __queue_work+0x5c1/0xed0 kernel/workqueue.c:1498
 queue_work_on+0xee/0x110 kernel/workqueue.c:1525
 queue_work include/linux/workqueue.h:507 [inline]
 io_ring_ctx_wait_and_kill+0x30a/0x3c0 fs/io_uring.c:8914
 io_uring_release+0x3e/0x50 fs/io_uring.c:8922
 __fput+0x288/0x920 fs/file_table.c:280
 task_work_run+0xdd/0x1a0 kernel/task_work.c:164
 exit_task_work include/linux/task_work.h:32 [inline]
 do_exit+0xbae/0x2a30 kernel/exit.c:825
 do_group_exit+0x125/0x310 kernel/exit.c:922
 get_signal+0x47f/0x2160 kernel/signal.c:2808
 arch_do_signal_or_restart+0x2a9/0x1c40 arch/x86/kernel/signal.c:865
 handle_signal_work kernel/entry/common.c:148 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:172 [inline]
 exit_to_user_mode_prepare+0x17d/0x290 kernel/entry/common.c:209
 __syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline]
 syscall_exit_to_user_mode+0x19/0x60 kernel/entry/common.c:302
 do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86
 entry_SYSCALL_64_after_hwframe+0x44/0xae

The buggy address belongs to the object at ffff888029d66000
 which belongs to the cache kmalloc-4k of size 4096
The buggy address is located 856 bytes inside of
 4096-byte region [ffff888029d66000, ffff888029d67000)
The buggy address belongs to the page:
page:ffffea0000a75800 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x29d60
head:ffffea0000a75800 order:3 compound_mapcount:0 compound_pincount:0
flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000010200 dead000000000100 dead000000000122 ffff888010842140
raw: 0000000000000000 0000000000040004 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd2040(__GFP_IO|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 6467, ts 58396905717, free_ts 57689976074
 prep_new_page mm/page_alloc.c:2436 [inline]
 get_page_from_freelist+0xa72/0x2f80 mm/page_alloc.c:4169
 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5391
 alloc_pages+0x18c/0x2a0 mm/mempolicy.c:2244
 alloc_slab_page mm/slub.c:1688 [inline]
 allocate_slab+0x32e/0x4b0 mm/slub.c:1828
 new_slab mm/slub.c:1891 [inline]
 new_slab_objects mm/slub.c:2637 [inline]
 ___slab_alloc+0x4ba/0x820 mm/slub.c:2800
 __slab_alloc.constprop.0+0xa7/0xf0 mm/slub.c:2840
 slab_alloc_node mm/slub.c:2922 [inline]
 slab_alloc mm/slub.c:2964 [inline]
 __kmalloc+0x312/0x330 mm/slub.c:4108
 kmalloc include/linux/slab.h:596 [inline]
 tomoyo_realpath_from_path+0xc3/0x620 security/tomoyo/realpath.c:254
 tomoyo_get_realpath security/tomoyo/file.c:151 [inline]
 tomoyo_path_perm+0x21b/0x400 security/tomoyo/file.c:822
 security_inode_getattr+0xcf/0x140 security/security.c:1332
 vfs_getattr fs/stat.c:139 [inline]
 vfs_statx+0x164/0x390 fs/stat.c:207
 vfs_fstatat fs/stat.c:225 [inline]
 vfs_lstat include/linux/fs.h:3386 [inline]
 __do_sys_newlstat+0x91/0x110 fs/stat.c:380
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
page last free stack trace:
 reset_page_owner include/linux/page_owner.h:24 [inline]
 free_pages_prepare mm/page_alloc.c:1346 [inline]
 free_pcp_prepare+0x2c5/0x780 mm/page_alloc.c:1397
 free_unref_page_prepare mm/page_alloc.c:3332 [inline]
 free_unref_page+0x19/0x690 mm/page_alloc.c:3411
 qlink_free mm/kasan/quarantine.c:146 [inline]
 qlist_free_all+0x5a/0xc0 mm/kasan/quarantine.c:165
 kasan_quarantine_reduce+0x180/0x200 mm/kasan/quarantine.c:272
 __kasan_slab_alloc+0x8e/0xa0 mm/kasan/common.c:444
 kasan_slab_alloc include/linux/kasan.h:254 [inline]
 slab_post_alloc_hook mm/slab.h:519 [inline]
 slab_alloc_node mm/slub.c:2956 [inline]
 slab_alloc mm/slub.c:2964 [inline]
 kmem_cache_alloc+0x285/0x4a0 mm/slub.c:2969
 getname_flags.part.0+0x50/0x4f0 fs/namei.c:138
 getname_flags include/linux/audit.h:319 [inline]
 getname+0x8e/0xd0 fs/namei.c:209
 do_sys_openat2+0xf5/0x420 fs/open.c:1198
 do_sys_open fs/open.c:1220 [inline]
 __do_sys_open fs/open.c:1228 [inline]
 __se_sys_open fs/open.c:1224 [inline]
 __x64_sys_open+0x119/0x1c0 fs/open.c:1224
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Memory state around the buggy address:
 ffff888029d66200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff888029d66280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff888029d66300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                    ^
 ffff888029d66380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff888029d66400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================


Tested on:

commit:         bdd748b6 io-wq: move nr_running and worker_refs out of..
git tree:       git://git.kernel.dk/linux-block for-5.15/io_uring
console output: https://syzkaller.appspot.com/x/log.txt?x=13141b61300000
kernel config:  https://syzkaller.appspot.com/x/.config?x=cb4282936412304f
dashboard link: https://syzkaller.appspot.com/bug?extid=9c3492b27d10dc49ffa6
compiler:       gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.1


  reply	other threads:[~2021-08-19 10:44 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-19  8:10 [syzbot] KASAN: use-after-free Read in tctx_task_work (2) syzbot
2021-08-19 10:03 ` Pavel Begunkov
2021-08-19 10:44   ` syzbot [this message]
2021-08-19 11:13     ` Pavel Begunkov
2021-08-19 17:25       ` syzbot
2021-08-19 20:56         ` Pavel Begunkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=000000000000fc001d05c9e73a85@google.com \
    --to=syzbot+9c3492b27d10dc49ffa6@syzkaller.appspotmail.com \
    --cc=asml.silence@gmail.com \
    --cc=axboe@kernel.dk \
    --cc=io-uring@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=syzkaller-bugs@googlegroups.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).