From: "Alejandro Bonilla" <abonilla@linuxwireless.org>
To: "'Pavel Machek'" <pavel@ucw.cz>, "'Lee Revell'" <rlrevell@joe-job.com>
Cc: "'Yani Ioannou'" <yani.ioannou@gmail.com>,
<linux-thinkpad@linux-thinkpad.org>,
<linux-kernel@vger.kernel.org>
Subject: RE: [ltp] Re: IBM HDAPS Someone interested?
Date: Wed, 22 Jun 2005 06:50:59 -0600 [thread overview]
Message-ID: <001201c57729$0a645840$600cc60a@amer.sykes.com> (raw)
In-Reply-To: <20050622104927.GB2561@openzaurus.ucw.cz>
> Hi!
>
> > > I'm trying to do watch -n1 cat /proc/acpi/ibm/ecdump, But
> I don't have
> > > ecdump. I'm with ibm-acpi 0.8
> > >
> >
> > I was thinking more along the lines of figure out the io port it's
> > using, then boot windows, set an IO breakpoint in softice, then drop
> > your laptop on the bed or something.
>
> It should be enough to tilt your laptop so that it parks
> heads... safer than
> dropping it.
>
> And perhaps easier solution is to locate the sensor on the
> mainboard, and
> trace where it is connected with magnifying glass (as vojtech
> already suggested).
>
> Pavel
>
> --
> 64 bytes from 195.113.31.123: icmp_seq=28 ttl=51
> time=448769.1 ms
>
/proc/acpi/ibm/ecdump is really not providing any information about this
sensor. yesterday, I almost broke the laptop to see if it would generate
anything, but it really only outputs ACPI events...
I shaked it, moved it 90deg and still no result, threw the lappy from like
40cm to the bed and nothing was really generated. Unless it is too fast like
to generate it in the watch or to be seen by human eye. I dunno.
It looks like /ecdump won't do it.
.Alejandro
next prev parent reply other threads:[~2005-06-22 12:51 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <42B6F6F6.2040704@zipman.it>
2005-06-20 17:28 ` [ltp] Re: IBM HDAPS Someone interested? Alejandro Bonilla
2005-06-20 19:51 ` Yani Ioannou
2005-06-20 20:11 ` Yani Ioannou
2005-06-20 20:25 ` Alejandro Bonilla
2005-06-20 20:34 ` Yani Ioannou
2005-06-20 20:48 ` Alejandro Bonilla
2005-06-20 21:35 ` Lee Revell
2005-06-20 21:57 ` Alejandro Bonilla
2005-06-20 23:35 ` Lee Revell
2005-06-22 10:49 ` Pavel Machek
2005-06-22 12:50 ` Alejandro Bonilla [this message]
2005-06-23 7:13 ` Vojtech Pavlik
2005-06-23 10:06 ` Eric Piel
2005-06-23 12:53 ` Alejandro Bonilla
2005-06-23 13:18 ` Vojtech Pavlik
2005-06-23 20:22 ` Eric Piel
2005-06-23 20:42 ` Lee Revell
2005-06-25 6:17 ` [ltp] IBM HDAPS Someone interested? (Accelerometer) Paul Sladen
2005-06-25 11:31 ` Vojtech Pavlik
2005-06-25 14:47 ` Pavel Machek
2005-06-25 15:00 ` Vojtech Pavlik
2005-06-25 18:14 ` Alejandro Bonilla
2005-06-25 20:14 ` Vojtech Pavlik
2005-06-27 12:33 ` Lenz Grimmer
2005-06-27 13:10 ` Alejandro Bonilla
2005-06-27 21:02 ` Lee Revell
2005-06-28 3:22 ` Alejandro Bonilla
2005-06-28 5:40 ` Lee Revell
2005-06-28 15:40 ` Vojtech Pavlik
2005-06-25 18:13 ` Alejandro Bonilla
2005-06-25 20:09 ` Vojtech Pavlik
2005-06-25 22:41 ` Alejandro Bonilla
2005-06-27 3:35 ` [Hdaps-devel] " Shawn Starr
2005-07-03 8:37 ` Alejandro Bonilla
2005-07-03 10:16 ` Vojtech Pavlik
2005-07-03 11:07 ` Jesper Juhl
2005-07-03 18:17 ` Jesper Juhl
2005-07-03 19:21 ` [Hdaps-devel] " Dave Hansen
2005-07-03 18:29 ` Alejandro Bonilla
2005-07-03 19:37 ` Dave Hansen
2005-07-03 19:42 ` Jesper Juhl
2005-07-03 18:52 ` Alejandro Bonilla
2005-07-03 19:42 ` Henrik Brix Andersen
2005-07-03 20:03 ` Jesper Juhl
2005-07-03 20:53 ` Tomasz Torcz
2005-07-03 19:41 ` Dave Hansen
2005-07-11 9:42 ` [ltp] IBM HDAPS Someone interested? (Userspace accelerometer viewer) Paul Sladen
2005-07-11 14:26 ` Alan Cox
2005-07-11 16:53 ` [Hdaps-devel] " Dave Hansen
2005-07-11 17:31 ` Paul RIVIER
2005-07-11 20:09 ` [Hdaps-devel] " Daniel Willmann
2005-07-12 15:55 ` Dave Hansen
2005-07-11 15:13 ` Pavel Machek
2005-07-12 9:41 ` Matthew Garrett
2005-07-11 16:21 ` [Hdaps-devel] " Dave Hansen
2005-07-13 16:27 ` Alejandro Bonilla
2005-06-25 17:42 ` [ltp] IBM HDAPS Someone interested? (Accelerometer) Alejandro Bonilla
2005-06-27 10:36 ` P
2005-06-23 15:33 ` [ltp] Re: IBM HDAPS Someone interested? Jan Knutar
2005-06-23 17:08 ` Lee Revell
2005-06-23 20:47 ` Andrew Haninger
2005-06-24 9:16 ` P
2005-06-24 12:56 ` Alejandro Bonilla
2005-06-24 17:20 ` Alejandro Bonilla
2005-06-20 20:53 ` Vojtech Pavlik
[not found] ` <005b01c575bd_724fac60_600cc60a@amer.sykes.com>
2005-06-20 20:25 ` Pavel Machek
2005-06-23 21:20 Parag Warudkar
-- strict thread matches above, loose matches on Subject: below --
2005-06-20 15:57 Vojtech Pavlik
2005-06-20 16:16 ` Alejandro Bonilla
2005-06-20 16:34 ` Vojtech Pavlik
2005-06-20 17:04 ` [ltp] " Lenz Grimmer
2005-06-20 17:17 ` Alejandro Bonilla
2005-06-20 18:57 ` Pekka Enberg
2005-06-20 20:13 ` Andrew Haninger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='001201c57729$0a645840$600cc60a@amer.sykes.com' \
--to=abonilla@linuxwireless.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-thinkpad@linux-thinkpad.org \
--cc=pavel@ucw.cz \
--cc=rlrevell@joe-job.com \
--cc=yani.ioannou@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).