[PATCH 1/2] USB: serial: mos7840: Adjust port settings for read and write registers

[PATCH 1/2] USB: serial: mos7840: Adjust port settings for read and write registers

[JackyChou]

From: JackyChou <jackychou@asix.com.tw>

In the read/write function, set port 2 independently in the 2-port case.

When setting the offset of port registers, the offset between port 1 and
other ports is different, so port 1 is set independently.
Then in the rest of ports, the port 2 between 2-ports case and 4-ports case
is different, so port 2 in 2-ports case is set independently.

Signed-off-by: JackyChou <jackychou@asix.com.tw>
---
 drivers/usb/serial/mos7840.c | 48 ++++++++++++------------------------
 1 file changed, 16 insertions(+), 32 deletions(-)

diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 88828b4b8c44..92ab68ef08ab 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -298,15 +298,10 @@ static int mos7840_set_uart_reg(struct usb_serial_port
*port, __u16 reg,
 	val = val & 0x00ff;
 	/* For the UART control registers, the application number need
 	   to be Or'ed */
-	if (port->serial->num_ports == 4) {
+	if (port->serial->num_ports == 2 && port->port_number != 0)
+		val |= ((__u16)port->port_number + 2) << 8;
+	else
 		val |= ((__u16)port->port_number + 1) << 8;
-	} else {
-		if (port->port_number == 0) {
-			val |= ((__u16)port->port_number + 1) << 8;
-		} else {
-			val |= ((__u16)port->port_number + 2) << 8;
-		}
-	}
 	dev_dbg(&port->dev, "%s application number is %x\n", __func__, val);
 	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ,
 			       MCS_WR_RTYPE, val, reg, NULL, 0,
@@ -332,15 +327,10 @@ static int mos7840_get_uart_reg(struct usb_serial_port
*port, __u16 reg,
 		return -ENOMEM;
 
 	/* Wval  is same as application number */
-	if (port->serial->num_ports == 4) {
+	if (port->serial->num_ports == 2 && port->port_number != 0)
+		Wval = ((__u16)port->port_number + 2) << 8;
+	else
 		Wval = ((__u16)port->port_number + 1) << 8;
-	} else {
-		if (port->port_number == 0) {
-			Wval = ((__u16)port->port_number + 1) << 8;
-		} else {
-			Wval = ((__u16)port->port_number + 2) << 8;
-		}
-	}
 	dev_dbg(&port->dev, "%s application number is %x\n", __func__,
Wval);
 	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ,
 			      MCS_RD_RTYPE, Wval, reg, buf,
VENDOR_READ_LENGTH,
@@ -2132,22 +2122,16 @@ static int mos7840_port_probe(struct usb_serial_port
*port)
 		mos7840_port->SpRegOffset = 0x0;
 		mos7840_port->ControlRegOffset = 0x1;
 		mos7840_port->DcrRegOffset = 0x4;
-	} else if ((mos7840_port->port_num == 2) && (serial->num_ports ==
4)) {
-		mos7840_port->SpRegOffset = 0x8;
-		mos7840_port->ControlRegOffset = 0x9;
-		mos7840_port->DcrRegOffset = 0x16;
-	} else if ((mos7840_port->port_num == 2) && (serial->num_ports ==
2)) {
-		mos7840_port->SpRegOffset = 0xa;
-		mos7840_port->ControlRegOffset = 0xb;
-		mos7840_port->DcrRegOffset = 0x19;
-	} else if ((mos7840_port->port_num == 3) && (serial->num_ports ==
4)) {
-		mos7840_port->SpRegOffset = 0xa;
-		mos7840_port->ControlRegOffset = 0xb;
-		mos7840_port->DcrRegOffset = 0x19;
-	} else if ((mos7840_port->port_num == 4) && (serial->num_ports ==
4)) {
-		mos7840_port->SpRegOffset = 0xc;
-		mos7840_port->ControlRegOffset = 0xd;
-		mos7840_port->DcrRegOffset = 0x1c;
+	} else {
+		u8 port_offset;
+
+		if ((mos7840_port->port_num == 2) && (serial->num_ports ==
2))
+			port_offset = 1;
+		else
+			port_offset = mos7840_port->port_num - 2;
+		mos7840_port->SpRegOffset = 0x8 + (2 * port_offset);
+		mos7840_port->ControlRegOffset = 0x9 + (2 * port_offset);
+		mos7840_port->DcrRegOffset = 0x16 + (3 * port_offset);
 	}
 	mos7840_dump_serial_port(port, mos7840_port);
 	mos7840_set_port_private(port, mos7840_port);
-- 
2.17.1

FW: [PATCH 2/2] USB: serial: mos7840: Add a product ID for the new product

[JackyChou]

From: JackyChou <jackychou@asix.com.tw>

Add a new PID 0x7843 to the driver.
Let the new products be able to set up 3 serial ports with the driver.

Signed-off-by: JackyChou <jackychou@asix.com.tw>
---
 drivers/usb/serial/mos7840.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 92ab68ef08ab..b6e7b55fcb7c 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -94,6 +94,7 @@
 /* The native mos7840/7820 component */
 #define USB_VENDOR_ID_MOSCHIP           0x9710
 #define MOSCHIP_DEVICE_ID_7840          0x7840
+#define MOSCHIP_DEVICE_ID_7843          0x7843
 #define MOSCHIP_DEVICE_ID_7820          0x7820
 #define MOSCHIP_DEVICE_ID_7810          0x7810
 /* The native component can have its vendor/device id's overridden
@@ -176,6 +177,7 @@ enum mos7840_flag {
 
 static const struct usb_device_id id_table[] = {
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
+	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7843)},
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7810)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2)},
@@ -2033,7 +2035,8 @@ static int mos7840_probe(struct usb_serial *serial,
 	int device_type;
 
 	if (product == MOSCHIP_DEVICE_ID_7810 ||
-		product == MOSCHIP_DEVICE_ID_7820) {
+		product == MOSCHIP_DEVICE_ID_7820 ||
+		product == MOSCHIP_DEVICE_ID_7843) {
 		device_type = product;
 		goto out;
 	}
@@ -2067,7 +2070,10 @@ static int mos7840_calc_num_ports(struct usb_serial
*serial,
 	int device_type = (unsigned long)usb_get_serial_data(serial);
 	int num_ports;
 
-	num_ports = (device_type >> 4) & 0x000F;
+	if (device_type == MOSCHIP_DEVICE_ID_7843)
+		num_ports = 3;
+	else
+		num_ports = (device_type >> 4) & 0x000F;
 
 	/*
 	 * num_ports is currently never zero as device_type is one of
-- 
2.17.1

Re: [PATCH 1/2] USB: serial: mos7840: Adjust port settings for read and write registers

[Johan Hovold]

On Thu, Nov 29, 2018 at 02:51:36PM +0800, JackyChou wrote:
> 
> From: JackyChou <jackychou@asix.com.tw>
> 
> In the read/write function, set port 2 independently in the 2-port case.
> 
> When setting the offset of port registers, the offset between port 1 and
> other ports is different, so port 1 is set independently.
> Then in the rest of ports, the port 2 between 2-ports case and 4-ports case
> is different, so port 2 in 2-ports case is set independently.
> 
> Signed-off-by: JackyChou <jackychou@asix.com.tw>
> ---

Thanks for the update. Unfortunately the patches are still white-space
damaged. You may want to take a look at:

	Documentation/process/email-clients.rst

and verify if its your mail client or server that corrupts the patches.

Either way, try sending them to yourself first and run checkpatch on the
result.

Also, remember to include a changelog when you resend (here below the
cut-off, ---, line, and increase the patch revision (e.g. this is really
v4?).

Thanks,
Johan