From: Jiri Slaby <jslaby@suse.cz>
To: stable@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, "Chew,
Kean ho" <kean.ho.chew@intel.com>,
"Chew, Chiau Ee" <chiau.ee.chew@intel.com>,
Wolfram Sang <wsa@the-dreams.de>, Jiri Slaby <jslaby@suse.cz>
Subject: [PATCH 3.12 11/50] i2c: i801: enable Intel BayTrail SMBUS
Date: Mon, 5 May 2014 14:42:53 +0200 [thread overview]
Message-ID: <008c29f91e856d2e46104c082baaa518832bd2a3.1399292849.git.jslaby@suse.cz> (raw)
In-Reply-To: <7d4f4737432af6216e86975e587331b9d8b08063.1399292849.git.jslaby@suse.cz>
In-Reply-To: <cover.1399292849.git.jslaby@suse.cz>
From: "Chew, Kean ho" <kean.ho.chew@intel.com>
3.12-stable review patch. If anyone has any objections, please let me know.
===============
commit 1b31e9b76ef8c62291e698dfdb973499986a7f68 upstream.
Add Device ID of Intel BayTrail SMBus Controller.
Signed-off-by: Chew, Kean ho <kean.ho.chew@intel.com>
Signed-off-by: Chew, Chiau Ee <chiau.ee.chew@intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
Documentation/i2c/busses/i2c-i801 | 1 +
drivers/i2c/busses/Kconfig | 1 +
drivers/i2c/busses/i2c-i801.c | 3 +++
3 files changed, 5 insertions(+)
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index 7b0dcdb57173..babe2ef16139 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -26,6 +26,7 @@ Supported adapters:
* Intel Wellsburg (PCH)
* Intel Coleto Creek (PCH)
* Intel Wildcat Point-LP (PCH)
+ * Intel BayTrail (SOC)
Datasheets: Publicly available at the Intel website
On Intel Patsburg and later chipsets, both the normal host SMBus controller
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 4e901081e287..01892bdfa7b7 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -110,6 +110,7 @@ config I2C_I801
Wellsburg (PCH)
Coleto Creek (PCH)
Wildcat Point-LP (PCH)
+ BayTrail (SOC)
This driver can also be built as a module. If so, the module
will be called i2c-i801.
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 737e29866887..0444f7aa1046 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -60,6 +60,7 @@
Wellsburg (PCH) MS 0x8d7f 32 hard yes yes yes
Coleto Creek (PCH) 0x23b0 32 hard yes yes yes
Wildcat Point-LP (PCH) 0x9ca2 32 hard yes yes yes
+ BayTrail (SOC) 0x0f12 32 hard yes yes yes
Features supported by this driver:
Software PEC no
@@ -161,6 +162,7 @@
STATUS_ERROR_FLAGS)
/* Older devices have their ID defined in <linux/pci_ids.h> */
+#define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS 0x0f12
#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22
#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22
/* Patsburg also has three 'Integrated Device Function' SMBus controllers */
@@ -822,6 +824,7 @@ static DEFINE_PCI_DEVICE_TABLE(i801_ids) = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) },
{ 0, }
};
--
1.9.2
next prev parent reply other threads:[~2014-05-05 12:53 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-05 12:28 [PATCH 3.12 00/50] 3.12.19-stable review Jiri Slaby
2014-05-05 12:42 ` [PATCH 3.12 01/50] openvswitch: fix vport-netdev unregister Jiri Slaby
2014-05-05 12:42 ` [PATCH 3.12 02/50] brcmsmac: fix deadlock on missing firmware Jiri Slaby
2014-05-05 12:42 ` [PATCH 3.12 03/50] /dev/mem: handle out-of-bounds read/write Jiri Slaby
2014-05-05 12:42 ` [PATCH 3.12 04/50] drivers/net: tulip_remove_one needs to call pci_disable_device() Jiri Slaby
2014-05-05 12:42 ` [PATCH 3.12 05/50] Bluetooth: Add support for Intel Bluetooth device [8087:0a2a] Jiri Slaby
2014-05-05 12:42 ` [PATCH 3.12 06/50] iommu/amd: Fix PASID format in INVALIDATE_IOTLB_PAGES command Jiri Slaby
2014-05-05 12:42 ` [PATCH 3.12 07/50] usbatm: Fix dynamic_debug / ratelimited atm_dbg and atm_rldbg macros Jiri Slaby
2014-05-05 12:42 ` [PATCH 3.12 08/50] printk: pr_debug_ratelimited: check state first to reduce "callbacks suppressed" messages Jiri Slaby
2014-05-05 12:42 ` [PATCH 3.12 09/50] dcache: restore error on restart in prepend_path Jiri Slaby
2014-05-05 12:42 ` [PATCH 3.12 10/50] __dentry_path() fixes Jiri Slaby
2014-05-05 12:42 ` Jiri Slaby [this message]
2014-05-05 12:42 ` [PATCH 3.12 12/50] e1000e: Fix no connectivity when driver loaded with cable out Jiri Slaby
2014-05-05 12:42 ` [PATCH 3.12 13/50] ACPI / EC: Process rather than discard events in acpi_ec_clear Jiri Slaby
2014-05-05 12:42 ` [PATCH 3.12 14/50] ARM: 7840/1: LPAE: don't reject mapping /dev/mem above 4GB Jiri Slaby
2014-05-05 12:42 ` [PATCH 3.12 15/50] x86/quirks: Add workaround for AMD F16h Erratum792 Jiri Slaby
2014-05-05 12:42 ` [PATCH 3.12 16/50] amd64_edac: Fix logic to determine channel for F15 M30h processors Jiri Slaby
2014-05-05 12:42 ` [PATCH 3.12 17/50] backing_dev: fix hung task on sync Jiri Slaby
2014-05-05 12:43 ` [PATCH 3.12 18/50] bdi: avoid oops on device removal Jiri Slaby
2014-05-05 12:43 ` [PATCH 3.12 19/50] virtio_balloon: don't softlockup on huge balloon changes Jiri Slaby
2014-05-05 12:43 ` [PATCH 3.12 20/50] ipmi: Fix a race restarting the timer Jiri Slaby
2014-05-05 12:43 ` [PATCH 3.12 21/50] KVM: ioapic: fix assignment of ioapic->rtc_status.pending_eoi (CVE-2014-0155) Jiri Slaby
2014-05-05 12:43 ` [PATCH 3.12 22/50] net: ipv4: current group_info should be put after using Jiri Slaby
2014-05-05 12:43 ` [PATCH 3.12 24/50] powerpc/8xx: mfspr SPRN_TBRx in lieu of mftb/mftbu is not supported Jiri Slaby
2014-05-05 12:43 ` [PATCH 3.12 25/50] ACPI / sleep: remove panic in case hardware has changed after S4 Jiri Slaby
2014-05-05 12:43 ` [PATCH 3.12 26/50] user namespace: fix incorrect memory barriers Jiri Slaby
2014-05-05 12:43 ` [PATCH 3.12 27/50] x86: Adjust irq remapping quirk for older revisions of 5500/5520 chipsets Jiri Slaby
2014-05-05 12:43 ` [PATCH 3.12 28/50] PCI: designware: Fix RC BAR to be single 64-bit non-prefetchable memory BAR Jiri Slaby
2014-05-05 12:43 ` [PATCH 3.12 29/50] PCI: designware: Fix iATU programming for cfg1, io and mem viewport Jiri Slaby
2014-05-05 12:43 ` [PATCH 3.12 30/50] ACPI / button: Add ACPI Button event via netlink routine Jiri Slaby
2014-05-05 12:43 ` [PATCH 3.12 31/50] staging: comedi: 8255_pci: initialize MITE data window Jiri Slaby
2014-05-05 12:43 ` [PATCH 3.12 32/50] tty: Set correct tty name in 'active' sysfs attribute Jiri Slaby
2014-05-05 12:43 ` [PATCH 3.12 33/50] tty: Fix low_latency BUG Jiri Slaby
2014-05-05 12:43 ` [PATCH 3.12 35/50] Bluetooth: Fix removing Long Term Key Jiri Slaby
2014-05-05 12:43 ` [PATCH 3.12 36/50] xfs: fix directory hash ordering bug Jiri Slaby
2014-05-05 12:43 ` [PATCH 3.12 37/50] Btrfs: skip submitting barrier for missing device Jiri Slaby
2014-05-05 12:43 ` [PATCH 3.12 38/50] Btrfs: fix deadlock with nested trans handles Jiri Slaby
2014-05-05 12:43 ` [PATCH 3.12 39/50] ext4: fix error return from ext4_ext_handle_uninitialized_extents() Jiri Slaby
2014-05-05 12:43 ` [PATCH 3.12 40/50] ext4: fix partial cluster handling for bigalloc file systems Jiri Slaby
2014-05-05 12:43 ` [PATCH 3.12 41/50] ext4: fix premature freeing of partial clusters split across leaf blocks Jiri Slaby
2014-05-05 12:43 ` [PATCH 3.12 42/50] jffs2: Fix segmentation fault found in stress test Jiri Slaby
2014-05-05 12:43 ` [PATCH 3.12 43/50] jffs2: Fix crash due to truncation of csize Jiri Slaby
2014-05-05 12:43 ` [PATCH 3.12 44/50] jffs2: avoid soft-lockup in jffs2_reserve_space_gc() Jiri Slaby
2014-05-05 12:43 ` [PATCH 3.12 45/50] jffs2: remove from wait queue after schedule() Jiri Slaby
2014-05-05 12:43 ` [PATCH 3.12 46/50] sparc32: fix build failure for arch_jump_label_transform Jiri Slaby
2014-05-05 12:43 ` [PATCH 3.12 47/50] sparc64: don't treat 64-bit syscall return codes as 32-bit Jiri Slaby
2014-05-05 12:43 ` [PATCH 3.12 48/50] sparc64: Make sure %pil interrupts are enabled during hypervisor yield Jiri Slaby
2014-05-05 12:43 ` [PATCH 3.12 49/50] wait: fix reparent_leader() vs EXIT_DEAD->EXIT_ZOMBIE race Jiri Slaby
2014-05-05 12:43 ` [PATCH 3.12 50/50] exit: call disassociate_ctty() before exit_task_namespaces() Jiri Slaby
2014-05-05 15:45 ` [PATCH 3.12 00/50] 3.12.19-stable review Guenter Roeck
2014-05-06 14:57 ` Shuah Khan
2014-05-09 8:32 ` Jiri Slaby
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=008c29f91e856d2e46104c082baaa518832bd2a3.1399292849.git.jslaby@suse.cz \
--to=jslaby@suse.cz \
--cc=chiau.ee.chew@intel.com \
--cc=kean.ho.chew@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).