linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Darren Dupre" <darren@dmdtech.org>
To: <linux-kernel@vger.kernel.org>
Subject: "DV failed to configure device" for Quantum DLT4000 tape drive on Adaptec 2940UW, 2.6.0-test11
Date: Sat, 29 Nov 2003 12:31:14 -0600	[thread overview]
Message-ID: <009201c3b6a6$f8e7e800$1e01a8c0@dmdtech2> (raw)

I only use my Adaptec 2940-UW for doing weekly backups to my Quantum DLT4000
(external) tape drive. On the 2.4 kernels, I'd just modprobe aic7xx and it
would detect the tape drive, load the st module and I could do my usual tar
command to backup stuff to tape. On 2.6.0-test11, I modprobe aic7xxx and it
detects the drive but it says "scsi0:A:5:0: DV failed to configure device.
Please file a bug report against this driver." and the st module does not
get loaded.

Not sure what this means.. I didnt have this problem with 2.4.21.

However, I can modprobe st and use the tape drive just fine.

Here is the relevant bits out of my syslog:

Nov 29 12:18:37 dmdtech kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI
HBA DRIVER, Rev 6.2.35
Nov 29 12:18:37 dmdtech kernel:         <Adaptec 2940 Ultra SCSI adapter>
Nov 29 12:18:37 dmdtech kernel:         aic7880: Ultra Wide Channel A, SCSI
Id=7, 16/253 SCBs
Nov 29 12:18:37 dmdtech kernel:
Nov 29 12:19:01 dmdtech kernel: scsi0:A:5:0: DV failed to configure device.
Please file a bug report against this driver.
Nov 29 12:19:05 dmdtech kernel: (scsi0:A:5): 10.000MB/s transfers
(10.000MHz, offset 15)
Nov 29 12:19:05 dmdtech kernel:   Vendor: Quantum   Model: DLT4000
Rev: CC37
Nov 29 12:19:05 dmdtech kernel:   Type:   Sequential-Access
ANSI SCSI revision: 02
Nov 29 12:20:18 dmdtech kernel: st: Version 20030811, fixed bufsize 32768,
s/g segs 256 <- this is when I manually loaded the st module
Nov 29 12:20:18 dmdtech kernel: Attached scsi tape st0 at scsi0, channel 0,
id 5, lun 0
Nov 29 12:20:18 dmdtech kernel: st0: try direct i/o: yes, max page reachable
by HBA 1048575
Nov 29 12:20:23 dmdtech kernel: st0: Block limits 1 - 16777215 bytes.


             reply	other threads:[~2003-11-29 18:31 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-11-29 18:31 Darren Dupre [this message]
2003-11-29 18:53 ` "DV failed to configure device" for Quantum DLT4000 tape drive on Adaptec 2940UW, 2.6.0-test11 Darren Dupre
2003-11-29 21:38 ` Adam Kropelin
2003-11-29 20:20   ` Darren Dupre

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='009201c3b6a6$f8e7e800$1e01a8c0@dmdtech2' \
    --to=darren@dmdtech.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).