From: "Alim Akhtar" <alim.akhtar@samsung.com>
To: "'Krzysztof Kozlowski'" <krzysztof.kozlowski@canonical.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Cc: <soc@kernel.org>, <linux-clk@vger.kernel.org>,
<devicetree@vger.kernel.org>, <olof@lixom.net>,
<linus.walleij@linaro.org>, <catalin.marinas@arm.com>,
<robh+dt@kernel.org>, <s.nawrocki@samsung.com>,
<linux-samsung-soc@vger.kernel.org>, <pankaj.dubey@samsung.com>,
<linux-fsd@tesla.com>,
"'Shashank Prashar'" <s.prashar@samsung.com>,
"'Aswani Reddy'" <aswani.reddy@samsung.com>
Subject: RE: [PATCH 15/23] arm64: dts: fsd: Add initial pinctrl support
Date: Mon, 17 Jan 2022 19:14:53 +0530 [thread overview]
Message-ID: <00ca01d80ba8$6b9b9800$42d2c800$@samsung.com> (raw)
In-Reply-To: <2927c34e-3259-4e9a-a657-aeeebf9089d2@canonical.com>
Hi Krzysztof
>-----Original Message-----
>From: Krzysztof Kozlowski [mailto:krzysztof.kozlowski@canonical.com]
>Sent: Thursday, January 13, 2022 6:50 PM
>To: Alim Akhtar <alim.akhtar@samsung.com>; linux-arm-
>kernel@lists.infradead.org; linux-kernel@vger.kernel.org
>Cc: soc@kernel.org; linux-clk@vger.kernel.org; devicetree@vger.kernel.org;
>olof@lixom.net; linus.walleij@linaro.org; catalin.marinas@arm.com;
>robh+dt@kernel.org; s.nawrocki@samsung.com; linux-samsung-
>soc@vger.kernel.org; pankaj.dubey@samsung.com; linux-fsd@tesla.com;
>Shashank Prashar <s.prashar@samsung.com>; Aswani Reddy
><aswani.reddy@samsung.com>
>Subject: Re: [PATCH 15/23] arm64: dts: fsd: Add initial pinctrl support
>
>On 13/01/2022 13:11, Alim Akhtar wrote:
>> Add initial pin configuration nodes for FSD SoC.
>>
>> Cc: linux-fsd@tesla.com
>> Signed-off-by: Shashank Prashar <s.prashar@samsung.com>
>> Signed-off-by: Aswani Reddy <aswani.reddy@samsung.com>
>> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
>> ---
>> arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi | 338
>+++++++++++++++++++++
>> arch/arm64/boot/dts/tesla/fsd.dtsi | 22 ++
>> 2 files changed, 360 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
>> b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
>> new file mode 100644
>> index 000000000000..ec8d944af636
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
>> @@ -0,0 +1,338 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Tesla Full Self-Driving SoC device tree source
>> + *
>> + * Copyright (c) 2017-2021 Samsung Electronics Co., Ltd.
>> + * https://www.samsung.com
>> + * Copyright (c) 2017-2021 Tesla, Inc.
>> + * https://www.tesla.com
>> + */
>> +
>> +#include <dt-bindings/pinctrl/samsung.h>
>> +
>> +&pinctrl_fsys0 {
>> +
>
>No need for empty line.
>
Noted
>> + gpf0: gpf0 {
>
>FYI:
>It's ok now, but the nodes will have to be renamed to "xxx-gpio-bank" later.
>
Have rebased my v2 on your pinmux schema update, so these and below comments are addressed.
Thanks
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpf1: gpf1 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpf6: gpf6 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpf4: gpf4 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpf5: gpf5 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +};
>> +
>> +&pinctrl_peric {
>> +
>
>No need for empty line.
>
>> + gpc8: gpc8 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpf2: gpf2 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpf3: gpf3 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpd0: gpd0 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpb0: gpb0 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpb1: gpb1 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpb4: gpb4 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpb5: gpb5 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpb6: gpb6 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpb7: gpb7 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpd1: gpd1 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpd2: gpd2 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpd3: gpd3 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpg0: gpg0 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpg1: gpg1 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpg2: gpg2 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpg3: gpg3 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpg4: gpg4 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpg5: gpg5 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpg6: gpg6 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpg7: gpg7 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + pwm0_out: pwm0-out {
>
>All pin configuretion node names with "-pins" suffix. Upcoming dtschema will
>require this.
>
>> + samsung,pins = "gpb6-1";
>> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
>> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
>> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;
>> + };
>> +
>> + pwm1_out: pwm1-out {
>> + samsung,pins = "gpb6-5";
>> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
>> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
>> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;
>> + };
>> +
>> + hs_i2c0_bus: hs-i2c0-bus {
>> + samsung,pins = "gpb0-0", "gpb0-1";
>> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
>> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
>> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
>> + };
>> +
>> + hs_i2c1_bus: hs-i2c1-bus {
>> + samsung,pins = "gpb0-2", "gpb0-3";
>> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
>> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
>> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
>> + };
>> +
>> + hs_i2c2_bus: hs-i2c2-bus {
>> + samsung,pins = "gpb0-4", "gpb0-5";
>> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
>> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
>> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
>> + };
>> +
>> + hs_i2c3_bus: hs-i2c3-bus {
>> + samsung,pins = "gpb0-6", "gpb0-7";
>> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
>> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
>> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
>> + };
>> +
>> + hs_i2c4_bus: hs-i2c4-bus {
>> + samsung,pins = "gpb1-0", "gpb1-1";
>> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
>> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
>> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
>> + };
>> +
>> + hs_i2c5_bus: hs-i2c5-bus {
>> + samsung,pins = "gpb1-2", "gpb1-3";
>> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
>> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
>> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
>> + };
>> +
>> + hs_i2c6_bus: hs-i2c6-bus {
>> + samsung,pins = "gpb1-4", "gpb1-5";
>> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
>> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
>> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
>> + };
>> +
>> + hs_i2c7_bus: hs-i2c7-bus {
>> + samsung,pins = "gpb1-6", "gpb1-7";
>> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
>> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
>> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
>> + };
>> +
>> + uart0_data: uart0-data {
>> + samsung,pins = "gpb7-0", "gpb7-1";
>> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
>> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
>> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
>> + };
>> +
>> + uart1_data: uart1-data {
>> + samsung,pins = "gpb7-4", "gpb7-5";
>> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
>> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
>> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
>> + };
>> +
>> + spi0_bus: spi0-bus {
>> + samsung,pins = "gpb4-0", "gpb4-2", "gpb4-3";
>> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
>> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
>> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
>> + };
>> +
>> + spi1_bus: spi1-bus {
>> + samsung,pins = "gpb4-4", "gpb4-6", "gpb4-7";
>> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
>> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
>> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
>> + };
>> +
>> + spi2_bus: spi2-bus {
>> + samsung,pins = "gpb5-0", "gpb5-2", "gpb5-3";
>> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
>> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
>> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
>> + };
>> +};
>> +
>> +&pinctrl_pmu {
>> +
>
>No need for empty line.
>
>> + gpq0: gpq0 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + };
>
>
>
>
>Best regards,
>Krzysztof
next prev parent reply other threads:[~2022-01-17 13:45 UTC|newest]
Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20220113122302epcas5p1d45c0714fe286f8f91d0f28c3fad86e4@epcas5p1.samsung.com>
2022-01-13 12:11 ` [PATCH 00/23] Add support for Tesla Full Self-Driving (FSD) SoC Alim Akhtar
[not found] ` <CGME20220113122311epcas5p4b7c253b49dce3bd3580407fcf312e70e@epcas5p4.samsung.com>
2022-01-13 12:11 ` [PATCH 01/23] dt-bindings: clock: Document FSD CMU bindings Alim Akhtar
2022-01-13 12:40 ` Krzysztof Kozlowski
2022-01-14 5:48 ` Alim Akhtar
2022-01-13 23:33 ` Rob Herring
[not found] ` <CGME20220113122317epcas5p11937078e2701b319a13b29e044224ec0@epcas5p1.samsung.com>
2022-01-13 12:11 ` [PATCH 02/23] dt-bindings: clock: Add bindings definitions for FSD CMU blocks Alim Akhtar
[not found] ` <CGME20220113122324epcas5p105c53b448b5801813a02a88c6107a2f3@epcas5p1.samsung.com>
2022-01-13 12:11 ` [PATCH 03/23] clk: samsung: fsd: Add initial clock support Alim Akhtar
2022-01-13 12:49 ` Krzysztof Kozlowski
2022-01-14 6:16 ` Alim Akhtar
[not found] ` <CGME20220113122330epcas5p46ae5cd30950b1d9126479231dcf5da49@epcas5p4.samsung.com>
2022-01-13 12:11 ` [PATCH 04/23] clk: samsung: fsd: Add cmu_peric block clock information Alim Akhtar
2022-01-13 12:55 ` Krzysztof Kozlowski
2022-01-14 6:30 ` Alim Akhtar
[not found] ` <CGME20220113122334epcas5p2d5958c77b0635e848f81ed2c5c98cdd5@epcas5p2.samsung.com>
2022-01-13 12:11 ` [PATCH 05/23] clk: samsung: fsd: Add cmu_fsys0 " Alim Akhtar
[not found] ` <CGME20220113122338epcas5p17ad3a31077b98388c0a6779904ee651e@epcas5p1.samsung.com>
2022-01-13 12:11 ` [PATCH 06/23] clk: samsung: fsd: Add cmu_fsys1 " Alim Akhtar
[not found] ` <CGME20220113122343epcas5p23831143e4e8fb92be8ad362f4817c03b@epcas5p2.samsung.com>
2022-01-13 12:11 ` [PATCH 07/23] clk: samsung: fsd: Add cmu_imem block " Alim Akhtar
[not found] ` <CGME20220113122346epcas5p41a7d6712c07544e99795ef5465f1f106@epcas5p4.samsung.com>
2022-01-13 12:11 ` [PATCH 08/23] clk: samsung: fsd: Add cmu_mfc " Alim Akhtar
[not found] ` <CGME20220113122351epcas5p45f49a559af9f6d0c6ba573594f95561d@epcas5p4.samsung.com>
2022-01-13 12:11 ` [PATCH 09/23] clk: samsung: fsd: Add cam_csi " Alim Akhtar
[not found] ` <CGME20220113122354epcas5p19e5cebe9e85e9ba1758fa0b9d7d1ef75@epcas5p1.samsung.com>
2022-01-13 12:11 ` [PATCH 10/23] dt-bindings: pinctrl: samsung: Add compatible for Tesla FSD SoC Alim Akhtar
2022-01-13 12:27 ` Krzysztof Kozlowski
2022-01-14 5:44 ` Alim Akhtar
2022-01-14 7:49 ` Krzysztof Kozlowski
2022-01-14 8:38 ` Alim Akhtar
[not found] ` <CGME20220113122400epcas5p34363ba8f477b4c273d601d0b64324afa@epcas5p3.samsung.com>
2022-01-13 12:11 ` [PATCH 11/23] pinctrl: samsung: add FSD SoC specific data Alim Akhtar
2022-01-13 12:57 ` Krzysztof Kozlowski
2022-01-16 12:05 ` Linus Walleij
[not found] ` <CGME20220113122404epcas5p4aa1c3ac09510eb55cce5fdd0791993a6@epcas5p4.samsung.com>
2022-01-13 12:11 ` [PATCH 12/23] dt-bindings: add vendor prefix for Tesla Alim Akhtar
2022-01-13 12:58 ` Krzysztof Kozlowski
2022-01-14 7:10 ` Alim Akhtar
2022-01-16 12:09 ` Linus Walleij
[not found] ` <CGME20220113122408epcas5p45053d1bf0acf2d8233a98b6c1abab6eb@epcas5p4.samsung.com>
2022-01-13 12:11 ` [PATCH 13/23] dt-bindings: arm: add Tesla FSD ARM SoC Alim Akhtar
2022-01-13 12:33 ` Krzysztof Kozlowski
2022-01-14 16:57 ` Alim Akhtar
2022-01-14 17:29 ` Krzysztof Kozlowski
2022-01-17 13:26 ` Alim Akhtar
2022-01-17 14:14 ` Arnd Bergmann
2022-01-17 15:00 ` Krzysztof Kozlowski
2022-01-17 20:41 ` Olof Johansson
[not found] ` <CGME20220113122413epcas5p46cb2cafb73936c423017240f98f72845@epcas5p4.samsung.com>
2022-01-13 12:11 ` [PATCH 14/23] arm64: dts: fsd: Add initial device tree support Alim Akhtar
2022-01-13 13:16 ` Krzysztof Kozlowski
2022-01-13 14:23 ` Arnd Bergmann
2022-01-14 8:13 ` Alim Akhtar
2022-01-14 2:08 ` kernel test robot
[not found] ` <CGME20220113122417epcas5p47398a5190cdf4c574c6f1762918b549f@epcas5p4.samsung.com>
2022-01-13 12:11 ` [PATCH 15/23] arm64: dts: fsd: Add initial pinctrl support Alim Akhtar
2022-01-13 13:19 ` Krzysztof Kozlowski
2022-01-17 13:44 ` Alim Akhtar [this message]
2022-01-17 13:50 ` Krzysztof Kozlowski
2022-01-18 14:58 ` Alim Akhtar
[not found] ` <CGME20220113122421epcas5p1af8422fc992801ced57e0439b48ad08e@epcas5p1.samsung.com>
2022-01-13 12:11 ` [PATCH 16/23] arm64: defconfig: Enable Tesla FSD SoC Alim Akhtar
[not found] ` <CGME20220113122427epcas5p1885d8b3b735e8f127b6694a309796e5a@epcas5p1.samsung.com>
2022-01-13 12:11 ` [PATCH 17/23] Documentation: bindings: Add fsd spi compatible in dt-bindings document Alim Akhtar
2022-01-13 13:21 ` Krzysztof Kozlowski
2022-01-13 13:24 ` Krzysztof Kozlowski
2022-01-14 7:17 ` Alim Akhtar
[not found] ` <CGME20220113122435epcas5p18e6a2699f193b9e1287588278a570235@epcas5p1.samsung.com>
2022-01-13 12:11 ` [PATCH 18/23] spi: s3c64xx: Add spi port configuration for Tesla FSD SoC Alim Akhtar
2022-01-13 13:28 ` Krzysztof Kozlowski
[not found] ` <YeAiIhfN216pRWhn@sirena.org.uk>
2022-01-14 7:15 ` Alim Akhtar
2022-01-16 12:12 ` Linus Walleij
[not found] ` <CGME20220113122440epcas5p4651d7cb2fc6d6a70fd5eaab5eadcf996@epcas5p4.samsung.com>
2022-01-13 12:11 ` [PATCH 19/23] arm64: dts: fsd: Add SPI device nodes Alim Akhtar
2022-01-13 13:30 ` Krzysztof Kozlowski
[not found] ` <CGME20220113122447epcas5p266d44c8df143229d22dfa700c285a786@epcas5p2.samsung.com>
2022-01-13 12:11 ` [PATCH 20/23] dt-bindings: iio: adc: exynos-adc: Add ADC-V3 variant Alim Akhtar
2022-01-13 13:32 ` Krzysztof Kozlowski
2022-01-17 9:47 ` Jonathan Cameron
2022-01-17 12:42 ` Alim Akhtar
[not found] ` <CGME20220113122452epcas5p201a3a87d0e9c0e9f449a90ed62de1f1c@epcas5p2.samsung.com>
2022-01-13 12:11 ` [PATCH 21/23] iio: adc: exynos-adc: Add support for ADC V3 controller Alim Akhtar
[not found] ` <20220116111939.413ece7e@jic23-huawei>
2022-01-17 12:20 ` Alim Akhtar
[not found] ` <CGME20220113122456epcas5p35f6406ab03af58d2e56b0b7304d4d002@epcas5p3.samsung.com>
2022-01-13 12:11 ` [PATCH 22/23] arm64: dts: fsd: Add ADC device tree node Alim Akhtar
2022-01-13 13:33 ` Krzysztof Kozlowski
[not found] ` <CGME20220113122502epcas5p37747b0c5c242c0571d294b9245963a1c@epcas5p3.samsung.com>
2022-01-13 12:11 ` [PATCH 23/23] clocksource: exynos_mct: Add support for handling three clusters Alim Akhtar
2022-01-13 13:36 ` Krzysztof Kozlowski
2022-01-13 12:31 ` [PATCH 00/23] Add support for Tesla Full Self-Driving (FSD) SoC Krzysztof Kozlowski
2022-01-13 18:53 ` Olof Johansson
2022-01-14 5:41 ` Alim Akhtar
2022-01-14 7:34 ` Krzysztof Kozlowski
2022-01-16 9:23 ` Pavel Machek
2022-01-17 20:53 ` Olof Johansson
2022-01-17 23:10 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='00ca01d80ba8$6b9b9800$42d2c800$@samsung.com' \
--to=alim.akhtar@samsung.com \
--cc=aswani.reddy@samsung.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski@canonical.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-fsd@tesla.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=olof@lixom.net \
--cc=pankaj.dubey@samsung.com \
--cc=robh+dt@kernel.org \
--cc=s.nawrocki@samsung.com \
--cc=s.prashar@samsung.com \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).