From: Abhinav Kumar <quic_abhinavk@quicinc.com>
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
Marijn Suijten <marijn.suijten@somainline.org>
Cc: <neil.armstrong@linaro.org>, Sam Ravnborg <sam@ravnborg.org>,
David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>,
Caleb Connolly <caleb@connolly.tech>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
"Andy Gross" <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
<~postmarketos/upstreaming@lists.sr.ht>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@somainline.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Martin Botka <martin.botka@somainline.org>,
"Jami Kettunen" <jami.kettunen@somainline.org>,
<dri-devel@lists.freedesktop.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-arm-msm@vger.kernel.org>,
Kuogee Hsieh <quic_khsieh@quicinc.com>,
Jessica Zhang <quic_jesszhan@quicinc.com>
Subject: Re: [PATCH RFC 03/10] drm/panel: Add LGD panel driver for Sony Xperia XZ3
Date: Tue, 30 May 2023 10:54:17 -0700 [thread overview]
Message-ID: <00d30c09-d622-11c1-2e07-44a798659982@quicinc.com> (raw)
In-Reply-To: <ebc3ff33-6e4f-b107-33c6-f35b03307058@linaro.org>
On 5/29/2023 3:18 PM, Dmitry Baryshkov wrote:
> On 30/05/2023 00:07, Marijn Suijten wrote:
>> On 2023-05-22 15:58:56, Dmitry Baryshkov wrote:
>>> On Mon, 22 May 2023 at 12:04, Neil Armstrong
>>> <neil.armstrong@linaro.org> wrote:
>>>>
>>>> On 22/05/2023 03:16, Dmitry Baryshkov wrote:
>>>>> On 22/05/2023 00:23, Marijn Suijten wrote:
>>>>>> Sony provides an unlabeled LGD + Atmel maXTouch assembly in its
>>>>>> Xperia
>>>>>> XZ3 (tama akatsuki) phone, with custom DCS commands to match.
>>>>>>
>>>>>> This panel features Display Stream Compression 1.1.
>>>>>>
>>>>>> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
>>>>>> ---
>>>>>> drivers/gpu/drm/panel/Kconfig | 11 +
>>>>>> drivers/gpu/drm/panel/Makefile | 1 +
>>>>>> drivers/gpu/drm/panel/panel-sony-akatsuki-lgd.c | 362
>>>>>> ++++++++++++++++++++++++
>>>>>> 3 files changed, 374 insertions(+)
>>>>>>
>>>>>> diff --git a/drivers/gpu/drm/panel/Kconfig
>>>>>> b/drivers/gpu/drm/panel/Kconfig
>>>>>> index 67ef898d133f2..18bd116e78a71 100644
>>>>>> --- a/drivers/gpu/drm/panel/Kconfig
>>>>>> +++ b/drivers/gpu/drm/panel/Kconfig
>>>>>> @@ -706,6 +706,17 @@ config DRM_PANEL_SONY_ACX565AKM
>>>>>> Say Y here if you want to enable support for the Sony
>>>>>> ACX565AKM
>>>>>> 800x600 3.5" panel (found on the Nokia N900).
>>>>>> +config DRM_PANEL_SONY_AKATSUKI_LGD
>>>>>> + tristate "Sony Xperia XZ3 LGD panel"
>>>>>> + depends on GPIOLIB && OF
>>>>>> + depends on DRM_MIPI_DSI
>>>>>> + depends on BACKLIGHT_CLASS_DEVICE
>>>>>> + help
>>>>>> + Say Y here if you want to enable support for the Sony
>>>>>> Xperia XZ3
>>>>>> + 1440x2880@60 6.0" OLED DSI cmd mode panel produced by LG
>>>>>> Display.
>>>>>> +
>>>>>> + This panel uses Display Stream Compression 1.1.
>>>>>> +
>>>>>> config DRM_PANEL_SONY_TD4353_JDI
>>>>>> tristate "Sony TD4353 JDI panel"
>>>>>> depends on GPIOLIB && OF
>>>>>> diff --git a/drivers/gpu/drm/panel/Makefile
>>>>>> b/drivers/gpu/drm/panel/Makefile
>>>>>> index ff169781e82d7..85133f73558f3 100644
>>>>>> --- a/drivers/gpu/drm/panel/Makefile
>>>>>> +++ b/drivers/gpu/drm/panel/Makefile
>>>>>> @@ -71,6 +71,7 @@ obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) +=
>>>>>> panel-sitronix-st7701.o
>>>>>> obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7703) += panel-sitronix-st7703.o
>>>>>> obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) +=
>>>>>> panel-sitronix-st7789v.o
>>>>>> obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
>>>>>> +obj-$(CONFIG_DRM_PANEL_SONY_AKATSUKI_LGD) +=
>>>>>> panel-sony-akatsuki-lgd.o
>>>>>> obj-$(CONFIG_DRM_PANEL_SONY_TD4353_JDI) += panel-sony-td4353-jdi.o
>>>>>> obj-$(CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521) +=
>>>>>> panel-sony-tulip-truly-nt35521.o
>>>>>> obj-$(CONFIG_DRM_PANEL_TDO_TL070WSH30) += panel-tdo-tl070wsh30.o
>>>>>> diff --git a/drivers/gpu/drm/panel/panel-sony-akatsuki-lgd.c
>>>>>> b/drivers/gpu/drm/panel/panel-sony-akatsuki-lgd.c
>>>>>> new file mode 100644
>>>>>> index 0000000000000..f55788f963dab
>>>>>> --- /dev/null
>>>>>> +++ b/drivers/gpu/drm/panel/panel-sony-akatsuki-lgd.c
>>>>>> @@ -0,0 +1,362 @@
>>>>>> +// SPDX-License-Identifier: GPL-2.0-only
>>>>>> +/*
>>>>>> + * Copyright (c) 2023 Marijn Suijten <marijn.suijten@somainline.org>
>>>>>> + *
>>>>>> + * Based on Sony Downstream's "Atmel LGD ID5" Akatsuki panel dtsi.
>>>>>> + */
>>>>>> +
>>>>>> +#include <linux/backlight.h>
>>>>>> +#include <linux/delay.h>
>>>>>> +#include <linux/gpio/consumer.h>
>>>>>> +#include <linux/module.h>
>>>>>> +#include <linux/of.h>
>>>>>> +#include <linux/of_device.h>
>>>>>> +#include <linux/regulator/consumer.h>
>>>>>> +
>>>>>> +#include <video/mipi_display.h>
>>>>>> +
>>>>>> +#include <drm/drm_mipi_dsi.h>
>>>>>> +#include <drm/drm_modes.h>
>>>>>> +#include <drm/drm_panel.h>
>>>>>> +#include <drm/drm_probe_helper.h>
>>>>>> +#include <drm/display/drm_dsc.h>
>>>>>> +#include <drm/display/drm_dsc_helper.h>
>>>>>> +
>>>>>> +struct sony_akatsuki_lgd {
>>>>>> + struct drm_panel panel;
>>>>>> + struct mipi_dsi_device *dsi;
>>>>>> + struct regulator *vddio;
>>>>>> + struct gpio_desc *reset_gpio;
>>>>>> + bool prepared;
>>>>>> +};
>>>>>> +
>>>>>> +static inline struct sony_akatsuki_lgd
>>>>>> *to_sony_akatsuki_lgd(struct drm_panel *panel)
>>>>>> +{
>>>>>> + return container_of(panel, struct sony_akatsuki_lgd, panel);
>>>>>> +}
>>>>>> +
>>>>>> +static int sony_akatsuki_lgd_on(struct sony_akatsuki_lgd *ctx)
>>>>>> +{
>>>>>> + struct mipi_dsi_device *dsi = ctx->dsi;
>>>>>> + struct device *dev = &dsi->dev;
>>>>>> + int ret;
>>>>>> +
>>>>>> + dsi->mode_flags |= MIPI_DSI_MODE_LPM;
>>>>>> +
>>>>>> + mipi_dsi_dcs_write_seq(dsi, 0x7f, 0x5a, 0x5a);
>>>>>> + mipi_dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a);
>>>>>> + mipi_dsi_dcs_write_seq(dsi, 0xf1, 0x5a, 0x5a);
>>>>>> + mipi_dsi_dcs_write_seq(dsi, 0xf2, 0x5a, 0x5a);
>>>>>> + mipi_dsi_dcs_write_seq(dsi, 0x02, 0x01);
>>>>>> + mipi_dsi_dcs_write_seq(dsi, 0x59, 0x01);
>>>>>> + /* Enable backlight control */
>>>>>> + mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY,
>>>>>> BIT(5));
>>>>>> + mipi_dsi_dcs_write_seq(dsi, 0x57, 0x20, 0x80, 0xde, 0x60, 0x00);
>>>>>> +
>>>>>> + ret = mipi_dsi_dcs_set_column_address(dsi, 0, 1440 - 1);
>>>>>> + if (ret < 0) {
>>>>>> + dev_err(dev, "Failed to set column address: %d\n", ret);
>>>>>> + return ret;
>>>>>> + }
>>>>>> +
>>>>>> + ret = mipi_dsi_dcs_set_page_address(dsi, 0, 2880 - 1);
>>>>>> + if (ret < 0) {
>>>>>> + dev_err(dev, "Failed to set page address: %d\n", ret);
>>>>>> + return ret;
>>>>>> + }
>>>>>> +
>>>>>> + mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_POWER_SAVE, 0x00);
>>>>>> +
>>>>>> + ret = mipi_dsi_dcs_set_tear_on(dsi,
>>>>>> MIPI_DSI_DCS_TEAR_MODE_VBLANK);
>>>>>> + if (ret < 0) {
>>>>>> + dev_err(dev, "Failed to set tear on: %d\n", ret);
>>>>>> + return ret;
>>>>>> + }
>>>>>> +
>>>>>> + mipi_dsi_dcs_write_seq(dsi, 0x7f, 0x5a, 0x5a);
>>>>>> + mipi_dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a);
>>>>>> + mipi_dsi_dcs_write_seq(dsi, 0xf1, 0x5a, 0x5a);
>>>>>> + mipi_dsi_dcs_write_seq(dsi, 0xf2, 0x5a, 0x5a);
>>>>>> + mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x03);
>>>>>> + mipi_dsi_dcs_write_seq(dsi, 0xf6, 0x04);
>>>>>> + mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x05);
>>>>>> + mipi_dsi_dcs_write_seq(dsi, 0xf6, 0x01, 0x7f, 0x00);
>>>>>> +
>>>>>> + ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
>>>>>> + if (ret < 0) {
>>>>>> + dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
>>>>>> + return ret;
>>>>>> + }
>>>>>> + msleep(120);
>>>>>> +
>>>>>> + mipi_dsi_dcs_write_seq(dsi, 0xe3, 0xac, 0x19, 0x34, 0x14, 0x7d);
>>>>>> +
>>>>>> + ret = mipi_dsi_dcs_set_display_on(dsi);
>>>>>> + if (ret < 0) {
>>>>>> + dev_err(dev, "Failed to turn display on: %d\n", ret);
>>>>>> + return ret;
>>>>>> + }
>>>>>
>>>>> My usual question: should the mipi_dsi_dcs_exit_sleep_mode() /
>>>>> mipi_dsi_dcs_set_display_on() be moved from prepare() to enable()
>>>>> part?
>>>>
>>>>
>>>> No, prepare is called before the video stream is started and when
>>>> display is still in LPM mode and the mode hasn't been set.
>>>>
>>>
>>> Yes, that's my point. Shouldn't we enable the panel _after_ starting
>>> the stream?
>>
>> I have never investigated what it takes to split these functions, but
>> some of these panels do show some corruption at startup which may be
>> circumvented by powering the panel on after starting the video stream?
>>
>> I'm just not sure where to make the split: downstream does describe a
>> qcom,mdss-dsi-on-command and qcom,mdss-dsi-post-panel-on-command, where
>> the latter only contains set_display_on() (not exit_sleep_mode()).
>> It is documented like:
>>
>> same as "qcom,mdss-dsi-on-command" except commands are sent after
>> displaying an image."
>>
>> So this seems like the right way to split them up, I'll test this out on
>> all submitted panel drivers.
>
> Interesting enough, Neil suggested that sending all the commands during
> pre_enable() is the correct sequence (especially for VIDEO mode panels),
> since not all DSI hosts can send commands after switching to the VIDEO
> mode.
>
I agree with Neil here.
Yes, it does seem natural to think that sending the video stream before
sending the on commands would avoid any potential corruption / garbage
screen issues.
But even from panel side should allow that. I have seen panel ON
sequences where some explicitly ask for ON commands before the video stream.
So, we cannot really generalize it and needs to be treated on a
host-to-host and panel-to-panel basis.
next prev parent reply other threads:[~2023-05-30 17:55 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-21 21:23 [PATCH RFC 00/10] drm/panel: Drivers for four Sony CMD-mode (and DSC) panels Marijn Suijten
2023-05-21 21:23 ` [PATCH RFC 01/10] drm/panel: Clean up SOFEF00 config dependencies Marijn Suijten
2023-05-22 9:01 ` Neil Armstrong
2023-05-28 22:00 ` Caleb Connolly
2023-05-21 21:23 ` [PATCH RFC 02/10] dt-bindings: display: panel: Describe Sony Xperia XZ3's LGD panel Marijn Suijten
2023-05-22 0:10 ` Dmitry Baryshkov
2023-05-21 21:23 ` [PATCH RFC 03/10] drm/panel: Add LGD panel driver for Sony Xperia XZ3 Marijn Suijten
2023-05-22 1:16 ` Dmitry Baryshkov
2023-05-22 9:04 ` Neil Armstrong
2023-05-22 12:58 ` Dmitry Baryshkov
2023-05-29 21:07 ` Marijn Suijten
2023-05-29 22:18 ` Dmitry Baryshkov
2023-05-29 22:37 ` Marijn Suijten
2023-05-29 22:39 ` Dmitry Baryshkov
2023-05-30 8:27 ` Marijn Suijten
2023-05-30 11:11 ` Dmitry Baryshkov
2023-05-30 18:19 ` Marijn Suijten
2023-05-30 17:54 ` Abhinav Kumar [this message]
2023-05-30 18:13 ` Marijn Suijten
2023-05-30 23:16 ` Dmitry Baryshkov
2023-05-29 21:11 ` Marijn Suijten
2023-05-29 22:17 ` Dmitry Baryshkov
2023-05-29 22:36 ` Dmitry Baryshkov
2023-05-30 7:24 ` Neil Armstrong
2023-05-30 8:41 ` Marijn Suijten
2023-05-30 9:29 ` Konrad Dybcio
2023-05-30 11:44 ` RFC: DSI host capabilities (was: [PATCH RFC 03/10] drm/panel: Add LGD panel driver for Sony Xperia XZ3) Dmitry Baryshkov
2023-05-30 12:15 ` AngeloGioacchino Del Regno
2023-05-30 12:36 ` Dmitry Baryshkov
2023-05-30 15:44 ` Neil Armstrong
2023-05-31 8:02 ` AngeloGioacchino Del Regno
2023-07-05 12:04 ` Maxime Ripard
2023-07-05 13:05 ` Neil Armstrong
2023-07-05 13:29 ` Maxime Ripard
2023-07-05 13:37 ` Dmitry Baryshkov
2023-07-05 14:24 ` Maxime Ripard
2023-07-05 15:20 ` Dmitry Baryshkov
2023-07-05 16:53 ` Maxime Ripard
2023-07-05 20:09 ` Dmitry Baryshkov
2023-07-06 7:24 ` Maxime Ripard
2023-07-06 7:33 ` Neil Armstrong
2023-07-06 7:59 ` Maxime Ripard
2023-07-06 8:03 ` Neil Armstrong
2023-07-05 15:58 ` Neil Armstrong
2023-05-21 21:23 ` [PATCH RFC 04/10] arm64: dts: qcom: sdm845-akatsuki: Configure OLED panel Marijn Suijten
2023-05-21 21:23 ` [PATCH RFC 05/10] dt-bindings: display: panel: Describe Samsung SOFEF01-M Display-IC Marijn Suijten
2023-05-21 22:23 ` Rob Herring
2023-05-21 21:23 ` [PATCH RFC 06/10] drm/panel/samsung-sofef01: Add panel driver for Sony Xperia 5 / 10 II Marijn Suijten
2023-05-22 1:19 ` Dmitry Baryshkov
2023-05-22 16:30 ` Konrad Dybcio
2023-05-22 22:38 ` Marijn Suijten
2023-05-22 22:32 ` Marijn Suijten
2023-05-22 22:56 ` Dmitry Baryshkov
2023-05-29 20:58 ` Marijn Suijten
2023-05-29 22:20 ` Dmitry Baryshkov
2023-05-29 22:35 ` Marijn Suijten
2023-05-21 21:23 ` [PATCH RFC 07/10] dt-bindings: display: panel: Describe Samsung SOFEF03-M Display-IC Marijn Suijten
2023-06-08 19:43 ` Rob Herring
2023-05-21 21:23 ` [PATCH RFC 08/10] drm/panel/samsung-sofef03: Add panel driver for Sony Xperia 5 II Marijn Suijten
2023-05-22 1:23 ` Dmitry Baryshkov
2023-05-22 9:08 ` Neil Armstrong
2023-05-22 12:57 ` Dmitry Baryshkov
2023-05-29 21:21 ` Marijn Suijten
2023-05-29 21:29 ` Konrad Dybcio
2023-05-29 22:22 ` Dmitry Baryshkov
2023-05-29 22:33 ` Marijn Suijten
2023-05-22 16:31 ` Konrad Dybcio
2023-05-21 21:23 ` [PATCH RFC 09/10] dt-bindings: display: panel: Describe Sony Xperia 1 display Marijn Suijten
2023-05-21 22:23 ` Rob Herring
2023-05-21 21:23 ` [PATCH RFC 10/10] drm/panel/sony-griffin-samsung: Add panel driver for Sony Xperia 1 Marijn Suijten
2023-06-28 9:22 ` Linus Walleij
2023-06-28 14:20 ` Marijn Suijten
2023-06-28 19:18 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=00d30c09-d622-11c1-2e07-44a798659982@quicinc.com \
--to=quic_abhinavk@quicinc.com \
--cc=agross@kernel.org \
--cc=airlied@gmail.com \
--cc=andersson@kernel.org \
--cc=angelogioacchino.delregno@somainline.org \
--cc=caleb@connolly.tech \
--cc=conor+dt@kernel.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jami.kettunen@somainline.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=martin.botka@somainline.org \
--cc=neil.armstrong@linaro.org \
--cc=quic_jesszhan@quicinc.com \
--cc=quic_khsieh@quicinc.com \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).