linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Richard Purdie" <rpurdie@rpsys.net>
To: "Andrew Morton" <akpm@osdl.org>,
	"Linux Kernel Mailing List" <linux-kernel@vger.kernel.org>
Subject: Re: 2.6.12-rc4-mm2
Date: Mon, 16 May 2005 12:27:57 +0100	[thread overview]
Message-ID: <018201c55a0a$75a99cf0$0f01a8c0@max> (raw)
In-Reply-To: 01a101c55877$e84e1130$0f01a8c0@max

For reference, the oops below still occurs with 2.6.12-rc4-mm2. I've noticed 
that "/sbin/init: error while loading shared libraries: /sbin/init: Cannot 
allocate version reference table: Cannot allocate Memory" appears on the 
console just before the "Kernel panic".

2.6.12-rc4, 2.6.12-rc3-mm2 and  2.6.12-rc3-mm3 all work with the same root 
filesystem which suggests this is a kernel issue of some sort.

Richard Purdie:
> 2.6.12-rc4-mm1 on a Sharp Zaurus (arm pxa255) results in:
>
> VFS: Mounted root (jffs2 filesystem) readonly.
> Freeing init memory: 76K
> Kernel panic - not syncing: Attempted to kill init!
> <3>BUG: soft lockup detected on CPU#0!
>
> Pid: 1, comm:                 init
> CPU: 0
> PC is at __delay+0x0/0xc
> LR is at panic+0x108/0x130
> pc : [<c00f71ac>]    lr : [<c0037140>]    Not tainted
> sp : c0301f4c  ip : c0301f4c  fp : c0301f58
> r10: 4001d000  r9 : c0300000  r8 : 00007f00
> r7 : c0300000  r6 : c027a3e8  r5 : c027a3e4  r4 : 0000240b
> r3 : 60000013  r2 : 000003ca  r1 : 00000000  r0 : 00017133
> Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  Segment user
> Control: 397F  Table: A1CB0000  DAC: 00000015
> [<c0059c90>] (softlockup_tick+0x0/0xa0) from [<c0021020>] 
> (timer_tick+0xb4/0xf8)
> r5 = C0300000  r4 = C0301F04
> [<c0020f6c>] (timer_tick+0x0/0xf8) from [<c00277e0>] 
> (pxa_timer_interrupt+0x48/0xa8)
> r6 = C0301F04  r5 = C0300000  r4 = F2A00000
> [<c0027798>] (pxa_timer_interrupt+0x0/0xa8) from [<c001cbc4>] 
> (__do_irq+0x6c/0xc4)
> r8 = C0301F04  r7 = 00000000  r6 = 00000000  r5 = C0300000
> r4 = C0230374
> [<c001cb58>] (__do_irq+0x0/0xc4) from [<c001ce48>] 
> (do_level_IRQ+0x68/0xb8)
> [<c001cde0>] (do_level_IRQ+0x0/0xb8) from [<c001ceec>] 
> (asm_do_IRQ+0x54/0x160)
> r6 = 04000000  r5 = F2D00000  r4 = FFFFFFFF
> [<c001ce98>] (asm_do_IRQ+0x0/0x160) from [<c001ba14>] 
> (__irq_svc+0x34/0x74)
> [<c0037038>] (panic+0x0/0x130) from [<c003a22c>] (do_exit+0x7c8/0xda4)
> r3 = 00000001  r2 = C02E8E40  r1 = C02E8D60  r0 = C02004C0
> [<c0039a64>] (do_exit+0x0/0xda4) from [<c003a900>] 
> (do_group_exit+0xc0/0x104)
> [<c003a840>] (do_group_exit+0x0/0x104) from [<c001be20>] 
> (ret_fast_syscall+0x0/0x2c)
> r5 = 00000000  r4 = 0000002F
>
> There was an extremely long pause after it printed "Kernel panic ..." 
> before it printed the traceback.


  reply	other threads:[~2005-05-16 11:30 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-05-12 10:31 2.6.12-rc4-mm1 Andrew Morton
2005-05-12 12:21 ` 2.6.12-rc4-mm1, build results compared to 2.6.12-rc3-mm3 Jan Dittmer
2005-05-13  6:19   ` Maneesh Soni
2005-05-12 12:39 ` 2.6.12-rc4-mm1 Reuben Farrelly
2005-05-12 15:09   ` 2.6.12-rc4-mm1 Andrew Morton
2005-05-14 21:19   ` 2.6.12-rc4-mm1 Andrew James Wade
2005-05-12 12:58 ` kobject_register failed for intelfb (-EACCES) (Re: 2.6.12-rc4-mm1) Alexey Dobriyan
2005-05-12 15:43   ` Greg KH
2005-05-12 15:59     ` Andrew Morton
2005-05-12 16:04       ` Greg KH
2005-05-12 16:20       ` Alexey Dobriyan
2005-05-12 18:14 ` [PATCH -mm] Print KBD and AUX irqs correctly Alexey Dobriyan
2005-05-12 21:42 ` [-mm patch] mm.h: fix page_zone compile error Adrian Bunk
2005-05-12 22:09   ` Dave Hansen
2005-05-12 22:26     ` Adrian Bunk
2005-05-13 13:26   ` Andy Whitcroft
2005-05-12 21:54 ` 2.6.12-rc4-mm1 Greg KH
2005-05-13  0:47 ` [-mm patch] drivers/cpufreq/cpufreq_conservative.c: make cpufreq_gov_dbs static Adrian Bunk
2005-05-13  7:24 ` 2.6.12-rc4-mm1 Dave Airlie
2005-05-13  7:25   ` 2.6.12-rc4-mm1 Dave Airlie
2005-05-13 14:53 ` 2.6.12-rc4-mm1 steve
2005-05-13 18:12 ` [-mm patch] kprobes: arch_supports_kretprobes cleanup Frederik Deweerdt
2005-05-13 19:40 ` 2.6.12-rc4-mm1 Johannes Stezenbach
2005-05-14 11:27 ` 2.6.12-rc4-mm1 Richard Purdie
2005-05-16 11:27   ` Richard Purdie [this message]
2005-05-15  1:20 ` 2.6.12-rc4-mm1 William Lee Irwin III
2005-05-15  1:30   ` 2.6.12-rc4-mm1 Andrew Morton
2005-05-15  9:44     ` 2.6.12-rc4-mm1 Jesper Juhl
2005-05-15  9:54       ` 2.6.12-rc4-mm1 Andrew Morton
2005-05-15  9:43 ` 2.6.12-rc4-mm1: drivers/usb/gadget/ether.c compile error Adrian Bunk
2005-05-16 15:26   ` David Brownell
2005-05-15 11:32 ` [-mm patch] arch/i386/Kconfig: SELECT_MEMORY_MODEL -> ARCH_SELECT_MEMORY_MODEL Adrian Bunk
2005-05-15 18:24   ` Dave Hansen
2005-05-16  9:13 2.6.12-rc4-mm2 Andrew Morton
2005-05-16  9:25 ` 2.6.12-rc4-mm2 Russell King
2005-05-16 10:50 ` 2.6.12-rc4-mm2 Danny ter Haar
2005-05-16 11:17   ` 2.6.12-rc4-mm2 Alexey Dobriyan
2005-05-16 11:38     ` 2.6.12-rc4-mm2 Danny ter Haar
2005-05-16 12:15       ` 2.6.12-rc4-mm2 Alexey Dobriyan
2005-05-16 17:11         ` 2.6.12-rc4-mm2 Danny ter Haar
2005-05-16 17:43           ` 2.6.12-rc4-mm2 Alexey Dobriyan
2005-05-16 19:30             ` 2.6.12-rc4-mm2 Danny ter Haar
2005-05-16 12:30 ` 2.6.12-rc4-mm2 Brice Goglin
2005-05-17  9:06 ` 2.6.12-rc4-mm2 Brice Goglin
2005-05-17 16:38   ` 2.6.12-rc4-mm2 Richard Purdie
2005-05-18 22:45     ` 2.6.12-rc4-mm2 Richard Purdie
2005-05-18  7:14 ` 2.6.12-rc4-mm2 Coywolf Qi Hunt
2005-05-18 20:26 ` 2.6.12-rc4-mm2 Alexander Nyberg
2005-05-19 14:59 ` 2.6.12-rc4-mm2 Brice Goglin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='018201c55a0a$75a99cf0$0f01a8c0@max' \
    --to=rpurdie@rpsys.net \
    --cc=akpm@osdl.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).