From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755716AbcBCN1W (ORCPT ); Wed, 3 Feb 2016 08:27:22 -0500 Received: from eusmtp01.atmel.com ([212.144.249.243]:48108 "EHLO eusmtp01.atmel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751682AbcBCN1R (ORCPT ); Wed, 3 Feb 2016 08:27:17 -0500 From: Cyrille Pitchen To: , CC: , , , , , , , , , , , , , Cyrille Pitchen Subject: [PATCH v3 02/14] mtd: spi-nor: properly detect the memory when it boots in Quad or Dual mode Date: Wed, 3 Feb 2016 14:26:47 +0100 Message-ID: <0234fe7fc577854b0bf59fcb376ce8260b56fb29.1454505161.git.cyrille.pitchen@atmel.com> X-Mailer: git-send-email 1.8.2.2 In-Reply-To: References: MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The quad (or dual) mode of a spi-nor memory may be enabled at boot time by non-volatile bits in some setting register. Also such a mode may have already been enabled at early stage by some boot loader. Hence, we should not guess the spi-nor memory is always configured for the regular SPI 1-1-1 protocol. Micron and Macronix memories, once their Quad (or dual for Micron) mode enabled, no longer process the regular JEDEC Read ID (0x9f) command but instead reply to a new command: JEDEC Read ID Multiple I/O (0xaf). Besides, in Quad mode both memory manufacturers expect ALL commands to use the SPI 4-4-4 protocol. For Micron memories, enabling their Dual mode implies to use the SPI 2-2-2 protocol for ALL commands. Winbond memories, once their Quad mode enabled, expect ALL commands to use the SPI 4-4-4 protocol. Unlike Micron and Macronix memories, they still reply to the regular JEDEC Read ID (0x9f) command. Signed-off-by: Cyrille Pitchen --- drivers/mtd/spi-nor/spi-nor.c | 76 +++++++++++++++++++++++++++++++++++-------- include/linux/mtd/spi-nor.h | 50 ++++++++++++++++++++++++++-- 2 files changed, 110 insertions(+), 16 deletions(-) diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index 3028c06547c1..cff2665cea66 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -73,6 +73,13 @@ struct flash_info { #define JEDEC_MFR(info) ((info)->id[0]) +struct read_id_config { + enum read_mode mode; + enum spi_nor_protocol proto; + u8 opcode; + int id_len; +}; + static const struct flash_info *spi_nor_match_id(const char *name); /* @@ -879,25 +886,60 @@ static const struct flash_info spi_nor_ids[] = { { }, }; -static const struct flash_info *spi_nor_read_id(struct spi_nor *nor) +static const struct flash_info *spi_nor_read_id(struct spi_nor *nor, + enum read_mode mode) { - int tmp; + int i, tmp; u8 id[SPI_NOR_MAX_ID_LEN]; const struct flash_info *info; + static const struct read_id_config configs[] = { + /* Regular JEDEC Read ID (always tested first) */ + {SPI_NOR_NORMAL, SNOR_PROTO_1_1_1, SPINOR_OP_RDID, sizeof(id)}, - tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN); - if (tmp < 0) { - dev_dbg(nor->dev, "error %d reading JEDEC ID\n", tmp); - return ERR_PTR(tmp); - } + /* Winbond QPI mode */ + {SPI_NOR_QUAD, SNOR_PROTO_4_4_4, SPINOR_OP_RDID, sizeof(id)}, + + /* Micron Quad mode & Macronix QPI mode */ + {SPI_NOR_QUAD, SNOR_PROTO_4_4_4, SPINOR_OP_MIO_RDID, 3}, + + /* Micron Dual mode */ + {SPI_NOR_DUAL, SNOR_PROTO_2_2_2, SPINOR_OP_MIO_RDID, 3} + }; + + /* + * Check whether the SPI NOR memory has already been configured (at + * reset or by some bootloader) to use a protocol other than SPI 1-1-1. + */ + for (i = 0; i < ARRAY_SIZE(configs); i++) { + /* Only try protocols supported by the user. */ + if (i && configs[i].mode != mode) + continue; + + /* Set this protocol for all commands. */ + nor->reg_proto = configs[i].proto; + nor->read_proto = configs[i].proto; + nor->write_proto = configs[i].proto; + nor->erase_proto = configs[i].proto; + + /* Read the JEDEC ID. */ + memset(id, 0, sizeof(id)); + tmp = nor->read_reg(nor, configs[i].opcode, + id, configs[i].id_len); + if (tmp < 0) { + dev_dbg(nor->dev, "error %d reading JEDEC ID\n", tmp); + return ERR_PTR(tmp); + } - for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) { - info = &spi_nor_ids[tmp]; - if (info->id_len) { - if (!memcmp(info->id, id, info->id_len)) - return &spi_nor_ids[tmp]; + /* Look this ID up. */ + for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) { + info = &spi_nor_ids[tmp]; + if (info->id_len) { + if (!memcmp(info->id, id, info->id_len)) + return &spi_nor_ids[tmp]; + } } } + dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %02x, %02x\n", id[0], id[1], id[2]); return ERR_PTR(-ENODEV); @@ -1148,11 +1190,17 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) if (ret) return ret; + /* Reset SPI protocol for all commands */ + nor->erase_proto = SNOR_PROTO_1_1_1; + nor->read_proto = SNOR_PROTO_1_1_1; + nor->write_proto = SNOR_PROTO_1_1_1; + nor->reg_proto = SNOR_PROTO_1_1_1; + if (name) info = spi_nor_match_id(name); /* Try to auto-detect if chip name wasn't specified or not found */ if (!info) - info = spi_nor_read_id(nor); + info = spi_nor_read_id(nor, mode); if (IS_ERR_OR_NULL(info)) return -ENOENT; @@ -1163,7 +1211,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) if (name && info->id_len) { const struct flash_info *jinfo; - jinfo = spi_nor_read_id(nor); + jinfo = spi_nor_read_id(nor, mode); if (IS_ERR(jinfo)) { return PTR_ERR(jinfo); } else if (jinfo != info) { diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index 62356d50815b..53932c87bcf2 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -75,8 +75,9 @@ #define SPINOR_OP_BRWR 0x17 /* Bank register write */ /* Used for Micron flashes only. */ -#define SPINOR_OP_RD_EVCR 0x65 /* Read EVCR register */ -#define SPINOR_OP_WD_EVCR 0x61 /* Write EVCR register */ +#define SPINOR_OP_MIO_RDID 0xaf /* Multiple I/O Read JEDEC ID */ +#define SPINOR_OP_RD_EVCR 0x65 /* Read EVCR register */ +#define SPINOR_OP_WD_EVCR 0x61 /* Write EVCR register */ /* Status Register bits. */ #define SR_WIP BIT(0) /* Write in progress */ @@ -105,6 +106,43 @@ enum read_mode { SPI_NOR_QUAD, }; + +#define SNOR_PROTO_CMD_OFF 8 +#define SNOR_PROTO_CMD_MASK GENMASK(11, 8) +#define SNOR_PROTO_CMD_TO_PROTO(cmd) \ + (((cmd) << SNOR_PROTO_CMD_OFF) & SNOR_PROTO_CMD_MASK) +#define SNOR_PROTO_CMD_FROM_PROTO(proto) \ + ((((u32)(proto)) & SNOR_PROTO_CMD_MASK) >> SNOR_PROTO_CMD_OFF) + +#define SNOR_PROTO_ADDR_OFF 4 +#define SNOR_PROTO_ADDR_MASK GENMASK(7, 4) +#define SNOR_PROTO_ADDR_TO_PROTO(addr) \ + (((addr) << SNOR_PROTO_ADDR_OFF) & SNOR_PROTO_ADDR_MASK) +#define SNOR_PROTO_ADDR_FROM_PROTO(proto) \ + ((((u32)(proto)) & SNOR_PROTO_ADDR_MASK) >> SNOR_PROTO_ADDR_OFF) + +#define SNOR_PROTO_DATA_OFF 0 +#define SNOR_PROTO_DATA_MASK GENMASK(3, 0) +#define SNOR_PROTO_DATA_TO_PROTO(data) \ + (((data) << SNOR_PROTO_DATA_OFF) & SNOR_PROTO_DATA_MASK) +#define SNOR_PROTO_DATA_FROM_PROTO(proto) \ + ((((u32)(proto)) & SNOR_PROTO_DATA_MASK) >> SNOR_PROTO_DATA_OFF) + +#define SNOR_PROTO(cmd, addr, data) \ + (SNOR_PROTO_CMD_TO_PROTO(cmd) | \ + SNOR_PROTO_ADDR_TO_PROTO(addr) | \ + SNOR_PROTO_DATA_TO_PROTO(data)) + +enum spi_nor_protocol { + SNOR_PROTO_1_1_1 = SNOR_PROTO(1, 1, 1), /* SPI */ + SNOR_PROTO_1_1_2 = SNOR_PROTO(1, 1, 2), /* Dual Output */ + SNOR_PROTO_1_1_4 = SNOR_PROTO(1, 1, 4), /* Quad Output */ + SNOR_PROTO_1_2_2 = SNOR_PROTO(1, 2, 2), /* Dual IO */ + SNOR_PROTO_1_4_4 = SNOR_PROTO(1, 4, 4), /* Quad IO */ + SNOR_PROTO_2_2_2 = SNOR_PROTO(2, 2, 2), /* Dual Command */ + SNOR_PROTO_4_4_4 = SNOR_PROTO(4, 4, 4), /* Quad Command */ +}; + #define SPI_NOR_MAX_CMD_SIZE 8 enum spi_nor_ops { SPI_NOR_OPS_READ = 0, @@ -132,6 +170,10 @@ enum spi_nor_option_flags { * @flash_read: the mode of the read * @sst_write_second: used by the SST write operation * @flags: flag options for the current SPI-NOR (SNOR_F_*) + * @erase_proto: the SPI protocol used by erase operations + * @read_proto: the SPI protocol used by read operations + * @write_proto: the SPI protocol used by write operations + * @reg_proto the SPI protocol used by read_reg/write_reg operations * @cmd_buf: used by the write_reg * @prepare: [OPTIONAL] do some preparations for the * read/write/erase/lock/unlock operations @@ -160,6 +202,10 @@ struct spi_nor { u8 read_opcode; u8 read_dummy; u8 program_opcode; + enum spi_nor_protocol erase_proto; + enum spi_nor_protocol read_proto; + enum spi_nor_protocol write_proto; + enum spi_nor_protocol reg_proto; enum read_mode flash_read; bool sst_write_second; u32 flags; -- 1.8.2.2