Re: [PATCH] PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link

From: Neil Armstrong <narmstrong@baylibre.com>
To: Marc Zyngier <maz@kernel.org>,
	linux-pci@vger.kernel.org, linux-amlogic@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Cc: Bjorn Helgaas <bhelgaas@google.com>,
	Rob Herring <robh@kernel.org>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Kevin Hilman <khilman@baylibre.com>,
	Yue Wang <yue.wang@Amlogic.com>
Subject: Re: [PATCH] PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link
Date: Mon, 11 May 2020 10:58:59 +0200	[thread overview]
Message-ID: <02c1ce97-109a-90da-46ce-f8394f00de74@baylibre.com> (raw)
In-Reply-To: <20200429164230.309922-1-maz@kernel.org>

On 29/04/2020 18:42, Marc Zyngier wrote:
> My vim3l board stubbornly refuses to play ball with a bog
> standard PCIe switch (ASM1184e), spitting all kind of errors
> ranging from link never coming up to crazy things like downstream
> ports falling off the face of the planet.
> 
> Upon investigating how the PCIe RC is configured, I found the
> following nugget: the Sysnopsys DWC PCIe Reference Manual, in the
> section dedicated to the PLCR register, describes bit 7 (FAST_LINK_MODE)
> as:
> 
> "Sets all internal timers to fast mode for simulation purposes."
> 
> I completely understand the need for setting this bit from a simulation
> perspective, but what I have on my desk is actual silicon, which
> expects timers to have a nominal value (and I expect this is the
> case for most people).
> 
> Making sure the FAST_LINK_MODE bit is cleared when configuring the RC
> solves this problem.
> 
> Fixes: 9c0ef6d34fdb ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver")
> Signed-off-by: Marc Zyngier <maz@kernel.org>
> ---
>  drivers/pci/controller/dwc/pci-meson.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c
> index 3715dceca1bf..ca59ba9e0ecd 100644
> --- a/drivers/pci/controller/dwc/pci-meson.c
> +++ b/drivers/pci/controller/dwc/pci-meson.c
> @@ -289,11 +289,11 @@ static void meson_pcie_init_dw(struct meson_pcie *mp)
>  	meson_cfg_writel(mp, val, PCIE_CFG0);
>  
>  	val = meson_elb_readl(mp, PCIE_PORT_LINK_CTRL_OFF);
> -	val &= ~LINK_CAPABLE_MASK;
> +	val &= ~(LINK_CAPABLE_MASK | FAST_LINK_MODE);
>  	meson_elb_writel(mp, val, PCIE_PORT_LINK_CTRL_OFF);
>  
>  	val = meson_elb_readl(mp, PCIE_PORT_LINK_CTRL_OFF);
> -	val |= LINK_CAPABLE_X1 | FAST_LINK_MODE;
> +	val |= LINK_CAPABLE_X1;
>  	meson_elb_writel(mp, val, PCIE_PORT_LINK_CTRL_OFF);
>  
>  	val = meson_elb_readl(mp, PCIE_GEN2_CTRL_OFF);
> 

I don't have HW to test on non NVMe, but I'm reading the same as you in the
DWC PCIe Reference Manual, and it seems coherent.

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>

Neil