[PATCH v2 0/1] arm64: dts: lx2160a: Fix the compatible string of LX2160A UART

[PATCH v2 0/1] arm64: dts: lx2160a: Fix the compatible string of LX2160A UART

[Zhen Lei]

v1 --> v2:
The UART of LX2160A is PL011, not sbsa-uart, correct the compatible string.

v1:
Remove from "arm,pl011" the compatible string.

Zhen Lei (1):
  arm64: dts: lx2160a: Fix the compatible string of LX2160A UART

 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

-- 
2.25.1

[PATCH v2 1/1] arm64: dts: lx2160a: Fix the compatible string of LX2160A UART

[Zhen Lei]

Mark Kettenis told us that:
According to the NXP documentation, the LX2160A has a real PL011 UART.

Therefore, rewrite it to the compatible string of pl011. The property
"current-speed" specific to "arm,sbsa-uart" is also deleted.

Suggested-by: Shawn Guo <shawnguo@kernel.org>
Suggested-by: Mark Kettenis <mark.kettenis@xs4all.nl>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index c4b1a59ba424..d2e6f7285674 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -920,34 +920,30 @@ QORIQ_CLK_PLL_DIV(8)>,
 		};
 
 		uart0: serial@21c0000 {
-			compatible = "arm,sbsa-uart","arm,pl011";
+			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x0 0x21c0000 0x0 0x1000>;
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			current-speed = <115200>;
 			status = "disabled";
 		};
 
 		uart1: serial@21d0000 {
-			compatible = "arm,sbsa-uart","arm,pl011";
+			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x0 0x21d0000 0x0 0x1000>;
 			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			current-speed = <115200>;
 			status = "disabled";
 		};
 
 		uart2: serial@21e0000 {
-			compatible = "arm,sbsa-uart","arm,pl011";
+			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x0 0x21e0000 0x0 0x1000>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			current-speed = <115200>;
 			status = "disabled";
 		};
 
 		uart3: serial@21f0000 {
-			compatible = "arm,sbsa-uart","arm,pl011";
+			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x0 0x21f0000 0x0 0x1000>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			current-speed = <115200>;
 			status = "disabled";
 		};
 
-- 
2.25.1

Re: [PATCH v2 1/1] arm64: dts: lx2160a: Fix the compatible string of LX2160A UART

[Shawn Guo]

On Tue, Jun 15, 2021 at 09:16:05PM +0800, Zhen Lei wrote:
> Mark Kettenis told us that:
> According to the NXP documentation, the LX2160A has a real PL011 UART.
> 
> Therefore, rewrite it to the compatible string of pl011. The property
> "current-speed" specific to "arm,sbsa-uart" is also deleted.
> 
> Suggested-by: Shawn Guo <shawnguo@kernel.org>
> Suggested-by: Mark Kettenis <mark.kettenis@xs4all.nl>
> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>

Applied, thanks.

RE: [PATCH v2 1/1] arm64: dts: lx2160a: Fix the compatible string of LX2160A UART

[Leo Li]

> -----Original Message-----
> From: Zhen Lei <thunder.leizhen@huawei.com>
> Sent: Tuesday, June 15, 2021 8:16 AM
> To: Shawn Guo <shawnguo@kernel.org>; Leo Li <leoyang.li@nxp.com>; Rob
> Herring <robh+dt@kernel.org>; Mark Kettenis <mark.kettenis@xs4all.nl>;
> devicetree <devicetree@vger.kernel.org>; linux-arm-kernel <linux-arm-
> kernel@lists.infradead.org>; linux-kernel <linux-kernel@vger.kernel.org>
> Cc: Zhen Lei <thunder.leizhen@huawei.com>
> Subject: [PATCH v2 1/1] arm64: dts: lx2160a: Fix the compatible string of
> LX2160A UART
> 
> Mark Kettenis told us that:
> According to the NXP documentation, the LX2160A has a real PL011 UART.
> 
> Therefore, rewrite it to the compatible string of pl011. The property "current-
> speed" specific to "arm,sbsa-uart" is also deleted.

Sorry that I missed the discussion on the v1.  But looks like this change breaks the LX2160 boot.  The AMBA matching doesn't seem to work.  And the console is not registered correctly.

[    0.639055] OF: amba_device_add() failed (-2) for /soc/serial@21c0000
[    0.645612] OF: amba_device_add() failed (-2) for /soc/serial@21d0000

> 
> Suggested-by: Shawn Guo <shawnguo@kernel.org>
> Suggested-by: Mark Kettenis <mark.kettenis@xs4all.nl>
> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
> ---
>  arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 12 ++++--------
>  1 file changed, 4 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> index c4b1a59ba424..d2e6f7285674 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> @@ -920,34 +920,30 @@ QORIQ_CLK_PLL_DIV(8)>,
>  		};
> 
>  		uart0: serial@21c0000 {
> -			compatible = "arm,sbsa-uart","arm,pl011";
> +			compatible = "arm,pl011", "arm,primecell";
>  			reg = <0x0 0x21c0000 0x0 0x1000>;
>  			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> -			current-speed = <115200>;
>  			status = "disabled";
>  		};
> 
>  		uart1: serial@21d0000 {
> -			compatible = "arm,sbsa-uart","arm,pl011";
> +			compatible = "arm,pl011", "arm,primecell";
>  			reg = <0x0 0x21d0000 0x0 0x1000>;
>  			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> -			current-speed = <115200>;
>  			status = "disabled";
>  		};
> 
>  		uart2: serial@21e0000 {
> -			compatible = "arm,sbsa-uart","arm,pl011";
> +			compatible = "arm,pl011", "arm,primecell";
>  			reg = <0x0 0x21e0000 0x0 0x1000>;
>  			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
> -			current-speed = <115200>;
>  			status = "disabled";
>  		};
> 
>  		uart3: serial@21f0000 {
> -			compatible = "arm,sbsa-uart","arm,pl011";
> +			compatible = "arm,pl011", "arm,primecell";
>  			reg = <0x0 0x21f0000 0x0 0x1000>;
>  			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
> -			current-speed = <115200>;
>  			status = "disabled";
>  		};
> 
> --
> 2.25.1
> 

Re: [PATCH v2 1/1] arm64: dts: lx2160a: Fix the compatible string of LX2160A UART

[Leizhen (ThunderTown)]

On 2021/8/10 6:52, Leo Li wrote:
> 
> 
>> -----Original Message-----
>> From: Zhen Lei <thunder.leizhen@huawei.com>
>> Sent: Tuesday, June 15, 2021 8:16 AM
>> To: Shawn Guo <shawnguo@kernel.org>; Leo Li <leoyang.li@nxp.com>; Rob
>> Herring <robh+dt@kernel.org>; Mark Kettenis <mark.kettenis@xs4all.nl>;
>> devicetree <devicetree@vger.kernel.org>; linux-arm-kernel <linux-arm-
>> kernel@lists.infradead.org>; linux-kernel <linux-kernel@vger.kernel.org>
>> Cc: Zhen Lei <thunder.leizhen@huawei.com>
>> Subject: [PATCH v2 1/1] arm64: dts: lx2160a: Fix the compatible string of
>> LX2160A UART
>>
>> Mark Kettenis told us that:
>> According to the NXP documentation, the LX2160A has a real PL011 UART.
>>
>> Therefore, rewrite it to the compatible string of pl011. The property "current-
>> speed" specific to "arm,sbsa-uart" is also deleted.
> 
> Sorry that I missed the discussion on the v1.  But looks like this change breaks the LX2160 boot.  The AMBA matching doesn't seem to work.  And the console is not registered correctly.

https://lore.kernel.org/linux-arm-kernel/cba3a29f-92b5-072a-9a27-60240f072dad@huawei.com/

Maybe we should fall back to v1.

> 
> [    0.639055] OF: amba_device_add() failed (-2) for /soc/serial@21c0000
> [    0.645612] OF: amba_device_add() failed (-2) for /soc/serial@21d0000
> 
>>
>> Suggested-by: Shawn Guo <shawnguo@kernel.org>
>> Suggested-by: Mark Kettenis <mark.kettenis@xs4all.nl>
>> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
>> ---
>>  arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 12 ++++--------
>>  1 file changed, 4 insertions(+), 8 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
>> b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
>> index c4b1a59ba424..d2e6f7285674 100644
>> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
>> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
>> @@ -920,34 +920,30 @@ QORIQ_CLK_PLL_DIV(8)>,
>>  		};
>>
>>  		uart0: serial@21c0000 {
>> -			compatible = "arm,sbsa-uart","arm,pl011";
>> +			compatible = "arm,pl011", "arm,primecell";
>>  			reg = <0x0 0x21c0000 0x0 0x1000>;
>>  			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
>> -			current-speed = <115200>;
>>  			status = "disabled";
>>  		};
>>
>>  		uart1: serial@21d0000 {
>> -			compatible = "arm,sbsa-uart","arm,pl011";
>> +			compatible = "arm,pl011", "arm,primecell";
>>  			reg = <0x0 0x21d0000 0x0 0x1000>;
>>  			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
>> -			current-speed = <115200>;
>>  			status = "disabled";
>>  		};
>>
>>  		uart2: serial@21e0000 {
>> -			compatible = "arm,sbsa-uart","arm,pl011";
>> +			compatible = "arm,pl011", "arm,primecell";
>>  			reg = <0x0 0x21e0000 0x0 0x1000>;
>>  			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
>> -			current-speed = <115200>;
>>  			status = "disabled";
>>  		};
>>
>>  		uart3: serial@21f0000 {
>> -			compatible = "arm,sbsa-uart","arm,pl011";
>> +			compatible = "arm,pl011", "arm,primecell";
>>  			reg = <0x0 0x21f0000 0x0 0x1000>;
>>  			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
>> -			current-speed = <115200>;
>>  			status = "disabled";
>>  		};
>>
>> --
>> 2.25.1
>>
> 
> .
> 

RE: [PATCH v2 1/1] arm64: dts: lx2160a: Fix the compatible string of LX2160A UART

[Leo Li]

> -----Original Message-----
> From: Leizhen (ThunderTown) <thunder.leizhen@huawei.com>
> Sent: Monday, August 9, 2021 8:28 PM
> To: Leo Li <leoyang.li@nxp.com>; Shawn Guo <shawnguo@kernel.org>; Rob
> Herring <robh+dt@kernel.org>; Mark Kettenis <mark.kettenis@xs4all.nl>;
> devicetree <devicetree@vger.kernel.org>; linux-arm-kernel <linux-arm-
> kernel@lists.infradead.org>; linux-kernel <linux-kernel@vger.kernel.org>
> Subject: Re: [PATCH v2 1/1] arm64: dts: lx2160a: Fix the compatible string of
> LX2160A UART
> 
> 
> 
> On 2021/8/10 6:52, Leo Li wrote:
> >
> >
> >> -----Original Message-----
> >> From: Zhen Lei <thunder.leizhen@huawei.com>
> >> Sent: Tuesday, June 15, 2021 8:16 AM
> >> To: Shawn Guo <shawnguo@kernel.org>; Leo Li <leoyang.li@nxp.com>;
> Rob
> >> Herring <robh+dt@kernel.org>; Mark Kettenis
> >> <mark.kettenis@xs4all.nl>; devicetree <devicetree@vger.kernel.org>;
> >> linux-arm-kernel <linux-arm- kernel@lists.infradead.org>;
> >> linux-kernel <linux-kernel@vger.kernel.org>
> >> Cc: Zhen Lei <thunder.leizhen@huawei.com>
> >> Subject: [PATCH v2 1/1] arm64: dts: lx2160a: Fix the compatible
> >> string of LX2160A UART
> >>
> >> Mark Kettenis told us that:
> >> According to the NXP documentation, the LX2160A has a real PL011 UART.
> >>
> >> Therefore, rewrite it to the compatible string of pl011. The property
> >> "current- speed" specific to "arm,sbsa-uart" is also deleted.
> >
> > Sorry that I missed the discussion on the v1.  But looks like this change
> breaks the LX2160 boot.  The AMBA matching doesn't seem to work.  And
> the console is not registered correctly.
> 
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.k
> ernel.org%2Flinux-arm-kernel%2Fcba3a29f-92b5-072a-9a27-
> 60240f072dad%40huawei.com%2F&amp;data=04%7C01%7Cleoyang.li%40nx
> p.com%7C9986b52f71724d7f6ae108d95b9e1d9b%7C686ea1d3bc2b4c6fa92cd
> 99c5c301635%7C0%7C0%7C637641556923909225%7CUnknown%7CTWFpbGZ
> sb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6M
> n0%3D%7C1000&amp;sdata=wReesSfMj1hV2iPTN0%2F%2B%2Fb%2BKJH8xF
> LLcDgOMfjx731I%3D&amp;reserved=0
> 
> Maybe we should fall back to v1.

I didn't look into the problem in detail.  Probably it is because of lacking the clock properties needed by the AMBA bus?

> 
> >
> > [    0.639055] OF: amba_device_add() failed (-2) for /soc/serial@21c0000
> > [    0.645612] OF: amba_device_add() failed (-2) for /soc/serial@21d0000
> >
> >>
> >> Suggested-by: Shawn Guo <shawnguo@kernel.org>
> >> Suggested-by: Mark Kettenis <mark.kettenis@xs4all.nl>
> >> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
> >> ---
> >>  arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 12 ++++--------
> >>  1 file changed, 4 insertions(+), 8 deletions(-)
> >>
> >> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> >> b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> >> index c4b1a59ba424..d2e6f7285674 100644
> >> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> >> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> >> @@ -920,34 +920,30 @@ QORIQ_CLK_PLL_DIV(8)>,
> >>  		};
> >>
> >>  		uart0: serial@21c0000 {
> >> -			compatible = "arm,sbsa-uart","arm,pl011";
> >> +			compatible = "arm,pl011", "arm,primecell";
> >>  			reg = <0x0 0x21c0000 0x0 0x1000>;
> >>  			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> >> -			current-speed = <115200>;
> >>  			status = "disabled";
> >>  		};
> >>
> >>  		uart1: serial@21d0000 {
> >> -			compatible = "arm,sbsa-uart","arm,pl011";
> >> +			compatible = "arm,pl011", "arm,primecell";
> >>  			reg = <0x0 0x21d0000 0x0 0x1000>;
> >>  			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> >> -			current-speed = <115200>;
> >>  			status = "disabled";
> >>  		};
> >>
> >>  		uart2: serial@21e0000 {
> >> -			compatible = "arm,sbsa-uart","arm,pl011";
> >> +			compatible = "arm,pl011", "arm,primecell";
> >>  			reg = <0x0 0x21e0000 0x0 0x1000>;
> >>  			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
> >> -			current-speed = <115200>;
> >>  			status = "disabled";
> >>  		};
> >>
> >>  		uart3: serial@21f0000 {
> >> -			compatible = "arm,sbsa-uart","arm,pl011";
> >> +			compatible = "arm,pl011", "arm,primecell";
> >>  			reg = <0x0 0x21f0000 0x0 0x1000>;
> >>  			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
> >> -			current-speed = <115200>;
> >>  			status = "disabled";
> >>  		};
> >>
> >> --
> >> 2.25.1
> >>
> >
> > .
> >

Re: [PATCH v2 1/1] arm64: dts: lx2160a: Fix the compatible string of LX2160A UART

[Li Yang]

On Tue, Aug 10, 2021 at 1:28 AM Leo Li <leoyang.li@nxp.com> wrote:
>
>
>
> > -----Original Message-----
> > From: Leizhen (ThunderTown) <thunder.leizhen@huawei.com>
> > Sent: Monday, August 9, 2021 8:28 PM
> > To: Leo Li <leoyang.li@nxp.com>; Shawn Guo <shawnguo@kernel.org>; Rob
> > Herring <robh+dt@kernel.org>; Mark Kettenis <mark.kettenis@xs4all.nl>;
> > devicetree <devicetree@vger.kernel.org>; linux-arm-kernel <linux-arm-
> > kernel@lists.infradead.org>; linux-kernel <linux-kernel@vger.kernel.org>
> > Subject: Re: [PATCH v2 1/1] arm64: dts: lx2160a: Fix the compatible string of
> > LX2160A UART
> >
> >
> >
> > On 2021/8/10 6:52, Leo Li wrote:
> > >
> > >
> > >> -----Original Message-----
> > >> From: Zhen Lei <thunder.leizhen@huawei.com>
> > >> Sent: Tuesday, June 15, 2021 8:16 AM
> > >> To: Shawn Guo <shawnguo@kernel.org>; Leo Li <leoyang.li@nxp.com>;
> > Rob
> > >> Herring <robh+dt@kernel.org>; Mark Kettenis
> > >> <mark.kettenis@xs4all.nl>; devicetree <devicetree@vger.kernel.org>;
> > >> linux-arm-kernel <linux-arm- kernel@lists.infradead.org>;
> > >> linux-kernel <linux-kernel@vger.kernel.org>
> > >> Cc: Zhen Lei <thunder.leizhen@huawei.com>
> > >> Subject: [PATCH v2 1/1] arm64: dts: lx2160a: Fix the compatible
> > >> string of LX2160A UART
> > >>
> > >> Mark Kettenis told us that:
> > >> According to the NXP documentation, the LX2160A has a real PL011 UART.
> > >>
> > >> Therefore, rewrite it to the compatible string of pl011. The property
> > >> "current- speed" specific to "arm,sbsa-uart" is also deleted.
> > >
> > > Sorry that I missed the discussion on the v1.  But looks like this change
> > breaks the LX2160 boot.  The AMBA matching doesn't seem to work.  And
> > the console is not registered correctly.
> >
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.k
> > ernel.org%2Flinux-arm-kernel%2Fcba3a29f-92b5-072a-9a27-
> > 60240f072dad%40huawei.com%2F&amp;data=04%7C01%7Cleoyang.li%40nx
> > p.com%7C9986b52f71724d7f6ae108d95b9e1d9b%7C686ea1d3bc2b4c6fa92cd
> > 99c5c301635%7C0%7C0%7C637641556923909225%7CUnknown%7CTWFpbGZ
> > sb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6M
> > n0%3D%7C1000&amp;sdata=wReesSfMj1hV2iPTN0%2F%2B%2Fb%2BKJH8xF
> > LLcDgOMfjx731I%3D&amp;reserved=0
> >
> > Maybe we should fall back to v1.
>
> I didn't look into the problem in detail.  Probably it is because of lacking the clock properties needed by the AMBA bus?
>

After reading through the history of sbsa-uart,  I think that I would
prefer us to fall back to v1 to be compatible with sbsa-uart rather
than changing it to be compatible with pl011.  Although the hardware
is actually compatible with the pl011, it would be better for us to
follow the newer SBSA standard to leave advanced configuration to
firmware and just expose the simple standard interface to OS.

Regards,
Leo

> >
> > >
> > > [    0.639055] OF: amba_device_add() failed (-2) for /soc/serial@21c0000
> > > [    0.645612] OF: amba_device_add() failed (-2) for /soc/serial@21d0000
> > >
> > >>
> > >> Suggested-by: Shawn Guo <shawnguo@kernel.org>
> > >> Suggested-by: Mark Kettenis <mark.kettenis@xs4all.nl>
> > >> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
> > >> ---
> > >>  arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 12 ++++--------
> > >>  1 file changed, 4 insertions(+), 8 deletions(-)
> > >>
> > >> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> > >> b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> > >> index c4b1a59ba424..d2e6f7285674 100644
> > >> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> > >> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> > >> @@ -920,34 +920,30 @@ QORIQ_CLK_PLL_DIV(8)>,
> > >>            };
> > >>
> > >>            uart0: serial@21c0000 {
> > >> -                  compatible = "arm,sbsa-uart","arm,pl011";
> > >> +                  compatible = "arm,pl011", "arm,primecell";
> > >>                    reg = <0x0 0x21c0000 0x0 0x1000>;
> > >>                    interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> > >> -                  current-speed = <115200>;
> > >>                    status = "disabled";
> > >>            };
> > >>
> > >>            uart1: serial@21d0000 {
> > >> -                  compatible = "arm,sbsa-uart","arm,pl011";
> > >> +                  compatible = "arm,pl011", "arm,primecell";
> > >>                    reg = <0x0 0x21d0000 0x0 0x1000>;
> > >>                    interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> > >> -                  current-speed = <115200>;
> > >>                    status = "disabled";
> > >>            };
> > >>
> > >>            uart2: serial@21e0000 {
> > >> -                  compatible = "arm,sbsa-uart","arm,pl011";
> > >> +                  compatible = "arm,pl011", "arm,primecell";
> > >>                    reg = <0x0 0x21e0000 0x0 0x1000>;
> > >>                    interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
> > >> -                  current-speed = <115200>;
> > >>                    status = "disabled";
> > >>            };
> > >>
> > >>            uart3: serial@21f0000 {
> > >> -                  compatible = "arm,sbsa-uart","arm,pl011";
> > >> +                  compatible = "arm,pl011", "arm,primecell";
> > >>                    reg = <0x0 0x21f0000 0x0 0x1000>;
> > >>                    interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
> > >> -                  current-speed = <115200>;
> > >>                    status = "disabled";
> > >>            };
> > >>
> > >> --
> > >> 2.25.1
> > >>
> > >
> > > .
> > >

Re: [PATCH v2 1/1] arm64: dts: lx2160a: Fix the compatible string of LX2160A UART

[Shawn Guo]

On Mon, Aug 09, 2021 at 10:52:04PM +0000, Leo Li wrote:
> 
> 
> > -----Original Message-----
> > From: Zhen Lei <thunder.leizhen@huawei.com>
> > Sent: Tuesday, June 15, 2021 8:16 AM
> > To: Shawn Guo <shawnguo@kernel.org>; Leo Li <leoyang.li@nxp.com>; Rob
> > Herring <robh+dt@kernel.org>; Mark Kettenis <mark.kettenis@xs4all.nl>;
> > devicetree <devicetree@vger.kernel.org>; linux-arm-kernel <linux-arm-
> > kernel@lists.infradead.org>; linux-kernel <linux-kernel@vger.kernel.org>
> > Cc: Zhen Lei <thunder.leizhen@huawei.com>
> > Subject: [PATCH v2 1/1] arm64: dts: lx2160a: Fix the compatible string of
> > LX2160A UART
> > 
> > Mark Kettenis told us that:
> > According to the NXP documentation, the LX2160A has a real PL011 UART.
> > 
> > Therefore, rewrite it to the compatible string of pl011. The property "current-
> > speed" specific to "arm,sbsa-uart" is also deleted.
> 
> Sorry that I missed the discussion on the v1.  But looks like this change breaks the LX2160 boot.  The AMBA matching doesn't seem to work.  And the console is not registered correctly.
> 
> [    0.639055] OF: amba_device_add() failed (-2) for /soc/serial@21c0000
> [    0.645612] OF: amba_device_add() failed (-2) for /soc/serial@21d0000

Patch dropped.

Shawn