linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Baolin Wang <baolin.wang@linaro.org>
To: jacek.anaszewski@gmail.com, pavel@ucw.cz
Cc: bjorn.andersson@linaro.org, baolin.wang@linaro.org,
	broonie@kernel.org, linux-leds@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] leds: core: Introduce generic pattern interface
Date: Mon, 25 Jun 2018 13:03:19 +0800	[thread overview]
Message-ID: <046c0cf717cbdfd55dcdc2bb7463642734e2ca4c.1529902636.git.baolin.wang@linaro.org> (raw)

From: Bjorn Andersson <bjorn.andersson@linaro.org>

Some LED controllers have support for autonomously controlling
brightness over time, according to some preprogrammed pattern or
function.

This adds a new optional operator that LED class drivers can implement
if they support such functionality as well as a new device attribute to
configure the pattern for a given LED.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
Note: I removed the pattern repeat check and will get the repeat number by adding
one extra file named 'pattern_repeat' according to previous discussion.
---
 Documentation/ABI/testing/sysfs-class-led |   16 ++++
 drivers/leds/led-class.c                  |  127 +++++++++++++++++++++++++++++
 include/linux/leds.h                      |   19 +++++
 3 files changed, 162 insertions(+)

diff --git a/Documentation/ABI/testing/sysfs-class-led b/Documentation/ABI/testing/sysfs-class-led
index 5f67f7a..fe90a12 100644
--- a/Documentation/ABI/testing/sysfs-class-led
+++ b/Documentation/ABI/testing/sysfs-class-led
@@ -61,3 +61,19 @@ Description:
 		gpio and backlight triggers. In case of the backlight trigger,
 		it is useful when driving a LED which is intended to indicate
 		a device in a standby like state.
+
+What: /sys/class/leds/<led>/pattern
+Date: June 2018
+KernelVersion: 4.18
+Description:
+	Specify a pattern for the LED, for LED hardware that support
+	altering the brightness as a function of time.
+
+	The pattern is given by a series of tuples, of brightness and
+	duration (ms). The LED is expected to traverse the series and
+	each brightness value for the specified duration.
+
+	As LED hardware might have different capabilities and precision
+	the requested pattern might be slighly adjusted by the driver
+	and the resulting pattern of such operation should be returned
+	when this file is read.
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index 3c7e348..5ebdd83 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -74,6 +74,131 @@ static ssize_t max_brightness_show(struct device *dev,
 }
 static DEVICE_ATTR_RO(max_brightness);
 
+static ssize_t pattern_show(struct device *dev,
+			    struct device_attribute *attr, char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct led_pattern *pattern;
+	size_t offset = 0;
+	int count, n, i;
+
+	if (!led_cdev->pattern_get)
+		return -EOPNOTSUPP;
+
+	pattern = led_cdev->pattern_get(led_cdev, &count);
+	if (IS_ERR_OR_NULL(pattern))
+		return PTR_ERR(pattern);
+
+	for (i = 0; i < count; i++) {
+		n = snprintf(buf + offset, PAGE_SIZE - offset, "%d %d",
+			     pattern[i].brightness, pattern[i].delta_t);
+
+		if (offset + n >= PAGE_SIZE)
+			goto err_nospc;
+
+		offset += n;
+
+		if (i < count - 1)
+			buf[offset++] = ' ';
+	}
+
+	buf[offset++] = '\n';
+
+	kfree(pattern);
+	return offset;
+
+err_nospc:
+	kfree(pattern);
+	return -ENOSPC;
+}
+
+static ssize_t pattern_store(struct device *dev,
+			     struct device_attribute *attr,
+			     const char *buf, size_t size)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct led_pattern *pattern = NULL;
+	unsigned long val;
+	char *sbegin;
+	char *elem;
+	char *s;
+	int ret, len = 0;
+	bool odd = true;
+
+	s = sbegin = kstrndup(buf, size, GFP_KERNEL);
+	if (!s)
+		return -ENOMEM;
+
+	/* Trim trailing newline */
+	s[strcspn(s, "\n")] = '\0';
+
+	/* If the remaining string is empty, clear the pattern */
+	if (!s[0]) {
+		ret = led_cdev->pattern_clear(led_cdev);
+		goto out;
+	}
+
+	pattern = kcalloc(size, sizeof(*pattern), GFP_KERNEL);
+	if (!pattern) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/* Parse out the brightness & delta_t touples and check for repeat */
+	while ((elem = strsep(&s, " ")) != NULL) {
+		ret = kstrtoul(elem, 10, &val);
+		if (ret)
+			goto out;
+
+		if (odd) {
+			pattern[len].brightness = val;
+		} else {
+			/* Ensure we don't have any delta_t == 0 */
+			if (!val) {
+				ret = -EINVAL;
+				goto out;
+			}
+
+			pattern[len].delta_t = val;
+			len++;
+		}
+
+		odd = !odd;
+	}
+
+	/*
+	 * Fail if we didn't find any data points or last data point was partial
+	 */
+	if (!len || !odd) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = led_cdev->pattern_set(led_cdev, pattern, len);
+
+out:
+	kfree(pattern);
+	kfree(sbegin);
+	return ret < 0 ? ret : size;
+}
+static DEVICE_ATTR_RW(pattern);
+
+static umode_t led_class_attrs_mode(struct kobject *kobj,
+				    struct attribute *attr, int index)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+	if (attr == &dev_attr_brightness.attr)
+		return attr->mode;
+	if (attr == &dev_attr_max_brightness.attr)
+		return attr->mode;
+	if (attr == &dev_attr_pattern.attr && led_cdev->pattern_set)
+		return attr->mode;
+
+	return 0;
+}
+
 #ifdef CONFIG_LEDS_TRIGGERS
 static DEVICE_ATTR(trigger, 0644, led_trigger_show, led_trigger_store);
 static struct attribute *led_trigger_attrs[] = {
@@ -88,11 +213,13 @@ static ssize_t max_brightness_show(struct device *dev,
 static struct attribute *led_class_attrs[] = {
 	&dev_attr_brightness.attr,
 	&dev_attr_max_brightness.attr,
+	&dev_attr_pattern.attr,
 	NULL,
 };
 
 static const struct attribute_group led_group = {
 	.attrs = led_class_attrs,
+	.is_visible = led_class_attrs_mode,
 };
 
 static const struct attribute_group *led_groups[] = {
diff --git a/include/linux/leds.h b/include/linux/leds.h
index b7e8255..acdbb2f 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -22,6 +22,7 @@
 #include <linux/workqueue.h>
 
 struct device;
+struct led_pattern;
 /*
  * LED Core
  */
@@ -88,6 +89,14 @@ struct led_classdev {
 				     unsigned long *delay_on,
 				     unsigned long *delay_off);
 
+	int (*pattern_set)(struct led_classdev *led_cdev,
+			   struct led_pattern *pattern, int len);
+
+	int (*pattern_clear)(struct led_classdev *led_cdev);
+
+	struct led_pattern *(*pattern_get)(struct led_classdev *led_cdev,
+					   int *len);
+
 	struct device		*dev;
 	const struct attribute_group	**groups;
 
@@ -446,4 +455,14 @@ static inline void led_classdev_notify_brightness_hw_changed(
 	struct led_classdev *led_cdev, enum led_brightness brightness) { }
 #endif
 
+/**
+ * struct led_pattern - brigheness value in a pattern
+ * @delta_t: delay until next entry, in milliseconds
+ * @brightness: brightness at time = 0
+ */
+struct led_pattern {
+	int delta_t;
+	int brightness;
+};
+
 #endif		/* __LINUX_LEDS_H_INCLUDED */
-- 
1.7.9.5


             reply	other threads:[~2018-06-25  5:04 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-25  5:03 Baolin Wang [this message]
2018-06-25  5:03 ` [PATCH 2/2] leds: sc27xx: Add pattern_set/get/clear interfaces for LED controller Baolin Wang
2018-06-25 12:18 ` [PATCH 1/2] leds: core: Introduce generic pattern interface Pavel Machek
2018-06-26  5:08   ` Baolin Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=046c0cf717cbdfd55dcdc2bb7463642734e2ca4c.1529902636.git.baolin.wang@linaro.org \
    --to=baolin.wang@linaro.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=broonie@kernel.org \
    --cc=jacek.anaszewski@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=pavel@ucw.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).