From: Michael Brunner <Michael.Brunner@kontron.com>
To: "lee.jones@linaro.org" <lee.jones@linaro.org>
Cc: "linux@roeck-us.net" <linux@roeck-us.net>,
"mibru@gmx.de" <mibru@gmx.de>,
"vkrasnov@dev.rtsoft.ru" <vkrasnov@dev.rtsoft.ru>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: [PATCH] mfd: kempld-core: Add support for additional devices
Date: Tue, 17 Nov 2020 09:31:55 +0000 [thread overview]
Message-ID: <0474e39790ab7351b1b11b565b995b94d49fb87c.camel@kontron.com> (raw)
This update includes DMI IDs for the following Kontron modules and
systems:
COMe-bDV7, COMe-cDV7, COMe-m4AL, COMe-mCT10, SMARC-sXAL, SMARC-sXA4,
Qseven-Q7AL, mITX-APL, pITX-APL and KBox A-203
Furthermore the ACPI HID KEM0000 is added, as it is also reserved for
kempld devices.
Instead of also adding the newly supported devices to the Kconfig
description this patch removes the lengthy list. With future usage of
the ACPI HIDs it will not be necessary to explicitly add support for
each individual device to the driver and therefore the list would
become incomplete anyway.
Signed-off-by: Michael Brunner <michael.brunner@kontron.com>
---
drivers/mfd/Kconfig | 30 ++--------------
drivers/mfd/kempld-core.c | 76 +++++++++++++++++++++++++++++++++++++--
2 files changed, 77 insertions(+), 29 deletions(-)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 8b99a13669bf..befd19da8562 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -720,33 +720,9 @@ config MFD_KEMPLD
select MFD_CORE
help
This is the core driver for the PLD (Programmable Logic Device) found
- on some Kontron ETX and COMexpress (ETXexpress) modules. The PLD
- device may provide functions like watchdog, GPIO, UART and I2C bus.
-
- The following modules are supported:
- * COMe-bBD#
- * COMe-bBL6
- * COMe-bHL6
- * COMe-bSL6
- * COMe-bIP#
- * COMe-bKL6
- * COMe-bPC2 (ETXexpress-PC)
- * COMe-bSC# (ETXexpress-SC T#)
- * COMe-cAL6
- * COMe-cBL6
- * COMe-cBT6
- * COMe-cBW6
- * COMe-cCT6
- * COMe-cDC2 (microETXexpress-DC)
- * COMe-cHL6
- * COMe-cKL6
- * COMe-cPC2 (microETXexpress-PC)
- * COMe-cSL6
- * COMe-mAL10
- * COMe-mBT10
- * COMe-mCT10
- * COMe-mTT10 (nanoETXexpress-TT)
- * ETX-OH
+ on some Kontron ETX and nearly all COMexpress (ETXexpress) modules as
+ well as on some other Kontron products. The PLD device may provide
+ functions like watchdog, GPIO, UART and I2C bus.
This driver can also be built as a module. If so, the module
will be called kempld-core.
diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c
index ecd26271b9a4..4ea0ecd45324 100644
--- a/drivers/mfd/kempld-core.c
+++ b/drivers/mfd/kempld-core.c
@@ -552,6 +552,7 @@ static int kempld_remove(struct platform_device *pdev)
#ifdef CONFIG_ACPI
static const struct acpi_device_id kempld_acpi_table[] = {
+ { "KEM0000", (kernel_ulong_t)&kempld_platform_data_generic },
{ "KEM0001", (kernel_ulong_t)&kempld_platform_data_generic },
{}
};
@@ -584,6 +585,14 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
},
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
+ }, {
+ .ident = "BDV7",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "COMe-bDV7"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
}, {
.ident = "BHL6",
.matches = {
@@ -648,6 +657,14 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
},
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
+ }, {
+ .ident = "CDV7",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "COMe-cDV7"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
}, {
.ident = "CHL6",
.matches = {
@@ -767,6 +784,22 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
},
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
+ }, {
+ .ident = "KBOXA203",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "KBox A-203"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
+ }, {
+ .ident = "M4A1",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "COMe-m4AL"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
}, {
.ident = "MAL1",
.matches = {
@@ -775,6 +808,14 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
},
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
+ }, {
+ .ident = "MITXAPL",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "mITX-APL"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
}, {
.ident = "MBR1",
.matches = {
@@ -823,6 +864,30 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
},
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
+ }, {
+ .ident = "PITXAPL",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "COMe-mCT"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
+ }, {
+ .ident = "SXAL",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "SMARC-sXAL"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
+ }, {
+ .ident = "SXAL4",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "SMARC-sXA4"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
}, {
.ident = "UNP1",
.matches = {
@@ -863,8 +928,7 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
},
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
- },
- {
+ }, {
.ident = "UTH6",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
@@ -872,6 +936,14 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
},
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
+ }, {
+ .ident = "Q7AL",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "Qseven-Q7AL"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
},
{}
};
--
2.25.1
next reply other threads:[~2020-11-17 9:32 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-17 9:31 Michael Brunner [this message]
2020-11-23 15:53 ` [PATCH v2] mfd: kempld-core: Add support for additional devices Michael Brunner
2020-11-26 2:06 ` Guenter Roeck
2020-12-02 12:53 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0474e39790ab7351b1b11b565b995b94d49fb87c.camel@kontron.com \
--to=michael.brunner@kontron.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mibru@gmx.de \
--cc=vkrasnov@dev.rtsoft.ru \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).