From: "Rafał Miłecki" <zajec5@gmail.com>
To: Kishon Vijay Abraham I <kishon@ti.com>,
Vinod Koul <vkoul@kernel.org>, Rob Herring <robh+dt@kernel.org>
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
"Florian Fainelli" <f.fainelli@gmail.com>,
"Vivek Unune" <npcomplete13@gmail.com>,
bcm-kernel-feedback-list@broadcom.com,
"Rafał Miłecki" <rafal@milecki.pl>,
linux-phy@lists.infradead.org
Subject: Re: [PATCH 3/3] phy: bcm-ns-usb2: support updated single CRU reg DT binding
Date: Fri, 5 Mar 2021 22:50:54 +0100 [thread overview]
Message-ID: <068064d6-23f6-e02e-9bc9-5b5970a0744e@gmail.com> (raw)
In-Reply-To: <20210226114501.31086-3-zajec5@gmail.com>
Cc linux-phy@ again (after fixing recipients ML limit)
On 26.02.2021 12:45, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
>
> Updated DT binding maps a single CRU register that is directly used for
> the PHY control. Accessing common CRU reg is handled using syscon &
> regmap.
>
> The old binding has been deprecated and stays as a fallback method.
>
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
> It's a reworked version of my abonded 2019 patch:
> [PATCH V2 2/2] phy: bcm-ns-usb2: support updated DT binding with the CRU syscon
> https://lore.kernel.org/patchwork/patch/1029863/
> ---
> drivers/phy/broadcom/phy-bcm-ns-usb2.c | 52 +++++++++++++++++++++-----
> 1 file changed, 43 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/phy/broadcom/phy-bcm-ns-usb2.c b/drivers/phy/broadcom/phy-bcm-ns-usb2.c
> index 4b015b8a71c3..98d32729a45d 100644
> --- a/drivers/phy/broadcom/phy-bcm-ns-usb2.c
> +++ b/drivers/phy/broadcom/phy-bcm-ns-usb2.c
> @@ -9,17 +9,23 @@
> #include <linux/clk.h>
> #include <linux/delay.h>
> #include <linux/err.h>
> +#include <linux/mfd/syscon.h>
> #include <linux/module.h>
> #include <linux/of_address.h>
> #include <linux/of_platform.h>
> #include <linux/phy/phy.h>
> #include <linux/platform_device.h>
> +#include <linux/regmap.h>
> #include <linux/slab.h>
>
> struct bcm_ns_usb2 {
> struct device *dev;
> struct clk *ref_clk;
> struct phy *phy;
> + struct regmap *clkset;
> + void __iomem *base;
> +
> + /* Deprecated binding */
> void __iomem *dmu;
> };
>
> @@ -27,7 +33,6 @@ static int bcm_ns_usb2_phy_init(struct phy *phy)
> {
> struct bcm_ns_usb2 *usb2 = phy_get_drvdata(phy);
> struct device *dev = usb2->dev;
> - void __iomem *dmu = usb2->dmu;
> u32 ref_clk_rate, usb2ctl, usb_pll_ndiv, usb_pll_pdiv;
> int err = 0;
>
> @@ -44,7 +49,10 @@ static int bcm_ns_usb2_phy_init(struct phy *phy)
> goto err_clk_off;
> }
>
> - usb2ctl = readl(dmu + BCMA_DMU_CRU_USB2_CONTROL);
> + if (usb2->base)
> + usb2ctl = readl(usb2->base);
> + else
> + usb2ctl = readl(usb2->dmu + BCMA_DMU_CRU_USB2_CONTROL);
>
> if (usb2ctl & BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK) {
> usb_pll_pdiv = usb2ctl;
> @@ -58,15 +66,24 @@ static int bcm_ns_usb2_phy_init(struct phy *phy)
> usb_pll_ndiv = (1920000000 * usb_pll_pdiv) / ref_clk_rate;
>
> /* Unlock DMU PLL settings with some magic value */
> - writel(0x0000ea68, dmu + BCMA_DMU_CRU_CLKSET_KEY);
> + if (usb2->clkset)
> + regmap_write(usb2->clkset, 0, 0x0000ea68);
> + else
> + writel(0x0000ea68, usb2->dmu + BCMA_DMU_CRU_CLKSET_KEY);
>
> /* Write USB 2.0 PLL control setting */
> usb2ctl &= ~BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_MASK;
> usb2ctl |= usb_pll_ndiv << BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_SHIFT;
> - writel(usb2ctl, dmu + BCMA_DMU_CRU_USB2_CONTROL);
> + if (usb2->base)
> + writel(usb2ctl, usb2->base);
> + else
> + writel(usb2ctl, usb2->dmu + BCMA_DMU_CRU_USB2_CONTROL);
>
> /* Lock DMU PLL settings */
> - writel(0x00000000, dmu + BCMA_DMU_CRU_CLKSET_KEY);
> + if (usb2->clkset)
> + regmap_write(usb2->clkset, 0, 0x00000000);
> + else
> + writel(0x00000000, usb2->dmu + BCMA_DMU_CRU_CLKSET_KEY);
>
> err_clk_off:
> clk_disable_unprepare(usb2->ref_clk);
> @@ -90,10 +107,27 @@ static int bcm_ns_usb2_probe(struct platform_device *pdev)
> return -ENOMEM;
> usb2->dev = dev;
>
> - usb2->dmu = devm_platform_ioremap_resource_byname(pdev, "dmu");
> - if (IS_ERR(usb2->dmu)) {
> - dev_err(dev, "Failed to map DMU regs\n");
> - return PTR_ERR(usb2->dmu);
> + if (of_find_property(dev->of_node, "brcm,syscon-clkset", NULL)) {
> + usb2->base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(usb2->base)) {
> + dev_err(dev, "Failed to map control reg\n");
> + return PTR_ERR(usb2->base);
> + }
> +
> + usb2->clkset = syscon_regmap_lookup_by_phandle(dev->of_node,
> + "brcm,syscon-clkset");
> + if (IS_ERR(usb2->clkset)) {
> + dev_err(dev, "Failed to lookup clkset regmap\n");
> + return PTR_ERR(usb2->clkset);
> + }
> + } else {
> + usb2->dmu = devm_platform_ioremap_resource_byname(pdev, "dmu");
> + if (IS_ERR(usb2->dmu)) {
> + dev_err(dev, "Failed to map DMU regs\n");
> + return PTR_ERR(usb2->dmu);
> + }
> +
> + dev_warn(dev, "using deprecated DT binding\n");
> }
>
> usb2->ref_clk = devm_clk_get(dev, "phy-ref-clk");
>
next prev parent reply other threads:[~2021-03-05 21:51 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-26 11:44 [PATCH 1/3] dt-bindings: phy: convert Broadcom NS USB 2.0 to the json-schema Rafał Miłecki
2021-02-26 11:45 ` [PATCH 2/3] dt-bindings: phy: brcm,ns-usb2-phy: bind single CRU reg Rafał Miłecki
2021-03-05 17:24 ` Rafał Miłecki
2021-03-05 21:50 ` Rafał Miłecki
2021-03-06 21:52 ` Rob Herring
2021-03-09 14:50 ` Rafał Miłecki
2021-02-26 11:45 ` [PATCH 3/3] phy: bcm-ns-usb2: support updated single CRU reg DT binding Rafał Miłecki
2021-03-05 17:25 ` Rafał Miłecki
2021-03-05 21:50 ` Rafał Miłecki [this message]
2021-03-05 17:24 ` [PATCH 1/3] dt-bindings: phy: convert Broadcom NS USB 2.0 to the json-schema Rafał Miłecki
2021-03-05 21:48 ` Rafał Miłecki
2021-03-06 21:25 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=068064d6-23f6-e02e-9bc9-5b5970a0744e@gmail.com \
--to=zajec5@gmail.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=kishon@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=npcomplete13@gmail.com \
--cc=rafal@milecki.pl \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).