From: Paolo Bonzini <pbonzini@redhat.com>
To: Vitaly Kuznetsov <vkuznets@redhat.com>, kvm@vger.kernel.org
Cc: Sean Christopherson <sean.j.christopherson@intel.com>,
Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>,
Yang Weijiang <weijiang.yang@intel.com>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] KVM: VMX: eVMCS: make evmcs_sanitize_exec_ctrls() work again
Date: Sat, 31 Oct 2020 15:28:25 +0100 [thread overview]
Message-ID: <06f37925-0578-a197-3bfc-fa7d5c6ae543@redhat.com> (raw)
In-Reply-To: <20201014143346.2430936-1-vkuznets@redhat.com>
On 14/10/20 16:33, Vitaly Kuznetsov wrote:
> It was noticed that evmcs_sanitize_exec_ctrls() is not being executed
> nowadays despite the code checking 'enable_evmcs' static key looking
> correct. Turns out, static key magic doesn't work in '__init' section
> (and it is unclear when things changed) but setup_vmcs_config() is called
> only once per CPU so we don't really need it to. Switch to checking
> 'enlightened_vmcs' instead, it is supposed to be in sync with
> 'enable_evmcs'.
>
> Opportunistically make evmcs_sanitize_exec_ctrls '__init' and drop unneeded
> extra newline from it.
>
> Reported-by: Yang Weijiang <weijiang.yang@intel.com>
> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
> ---
> - Changes since v1:
> put '#if IS_ENABLED(CONFIG_HYPERV)' around enlightened_vmcs check
> [ktest robot]
> ---
> arch/x86/kvm/vmx/evmcs.c | 3 +--
> arch/x86/kvm/vmx/evmcs.h | 3 +--
> arch/x86/kvm/vmx/vmx.c | 4 +++-
> 3 files changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/arch/x86/kvm/vmx/evmcs.c b/arch/x86/kvm/vmx/evmcs.c
> index e5325bd0f304..f3199bb02f22 100644
> --- a/arch/x86/kvm/vmx/evmcs.c
> +++ b/arch/x86/kvm/vmx/evmcs.c
> @@ -297,14 +297,13 @@ const struct evmcs_field vmcs_field_to_evmcs_1[] = {
> };
> const unsigned int nr_evmcs_1_fields = ARRAY_SIZE(vmcs_field_to_evmcs_1);
>
> -void evmcs_sanitize_exec_ctrls(struct vmcs_config *vmcs_conf)
> +__init void evmcs_sanitize_exec_ctrls(struct vmcs_config *vmcs_conf)
> {
> vmcs_conf->pin_based_exec_ctrl &= ~EVMCS1_UNSUPPORTED_PINCTRL;
> vmcs_conf->cpu_based_2nd_exec_ctrl &= ~EVMCS1_UNSUPPORTED_2NDEXEC;
>
> vmcs_conf->vmexit_ctrl &= ~EVMCS1_UNSUPPORTED_VMEXIT_CTRL;
> vmcs_conf->vmentry_ctrl &= ~EVMCS1_UNSUPPORTED_VMENTRY_CTRL;
> -
> }
> #endif
>
> diff --git a/arch/x86/kvm/vmx/evmcs.h b/arch/x86/kvm/vmx/evmcs.h
> index e5f7a7ebf27d..bd41d9462355 100644
> --- a/arch/x86/kvm/vmx/evmcs.h
> +++ b/arch/x86/kvm/vmx/evmcs.h
> @@ -185,7 +185,7 @@ static inline void evmcs_load(u64 phys_addr)
> vp_ap->enlighten_vmentry = 1;
> }
>
> -void evmcs_sanitize_exec_ctrls(struct vmcs_config *vmcs_conf);
> +__init void evmcs_sanitize_exec_ctrls(struct vmcs_config *vmcs_conf);
> #else /* !IS_ENABLED(CONFIG_HYPERV) */
> static inline void evmcs_write64(unsigned long field, u64 value) {}
> static inline void evmcs_write32(unsigned long field, u32 value) {}
> @@ -194,7 +194,6 @@ static inline u64 evmcs_read64(unsigned long field) { return 0; }
> static inline u32 evmcs_read32(unsigned long field) { return 0; }
> static inline u16 evmcs_read16(unsigned long field) { return 0; }
> static inline void evmcs_load(u64 phys_addr) {}
> -static inline void evmcs_sanitize_exec_ctrls(struct vmcs_config *vmcs_conf) {}
> static inline void evmcs_touch_msr_bitmap(void) {}
> #endif /* IS_ENABLED(CONFIG_HYPERV) */
>
> diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
> index 96979c09ebd1..682f2b2f9a18 100644
> --- a/arch/x86/kvm/vmx/vmx.c
> +++ b/arch/x86/kvm/vmx/vmx.c
> @@ -2607,8 +2607,10 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
> vmcs_conf->vmexit_ctrl = _vmexit_control;
> vmcs_conf->vmentry_ctrl = _vmentry_control;
>
> - if (static_branch_unlikely(&enable_evmcs))
> +#if IS_ENABLED(CONFIG_HYPERV)
> + if (enlightened_vmcs)
> evmcs_sanitize_exec_ctrls(vmcs_conf);
> +#endif
>
> return 0;
> }
>
Queued, thanks.
Paolo
prev parent reply other threads:[~2020-10-31 14:28 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-14 14:33 [PATCH v2] KVM: VMX: eVMCS: make evmcs_sanitize_exec_ctrls() work again Vitaly Kuznetsov
2020-10-31 14:28 ` Paolo Bonzini [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=06f37925-0578-a197-3bfc-fa7d5c6ae543@redhat.com \
--to=pbonzini@redhat.com \
--cc=jmattson@google.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sean.j.christopherson@intel.com \
--cc=vkuznets@redhat.com \
--cc=wanpengli@tencent.com \
--cc=weijiang.yang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).