From: Hans Verkuil <hverkuil@xs4all.nl>
To: Maxime Jourdan <mjourdan@baylibre.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Hans Verkuil <hans.verkuil@cisco.com>,
Kevin Hilman <khilman@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org
Subject: Re: [PATCH v6 3/4] media: meson: add v4l2 m2m video decoder driver
Date: Mon, 27 May 2019 12:04:41 +0200 [thread overview]
Message-ID: <07af1a22-d57c-aff6-b476-98fbf72135c1@xs4all.nl> (raw)
In-Reply-To: <20190514135612.30822-4-mjourdan@baylibre.com>
Hi Maxime,
First a high-level comment: I think this driver should go to staging.
Once we finalize the stateful decoder spec, and we've updated the
v4l2-compliance test, then this needs to be tested against that and
only if it passes can it be moved out of staging.
It is just a bit too soon to have this in mainline at this time.
One other comment below:
On 5/14/19 3:56 PM, Maxime Jourdan wrote:
> Amlogic SoCs feature a powerful video decoder unit able to
> decode many formats, with a performance of usually up to 4k60.
>
> This is a driver for this IP that is based around the v4l2 m2m framework.
>
> It features decoding for:
> - MPEG 1
> - MPEG 2
>
> Supported SoCs are: GXBB (S905), GXL (S905X/W/D), GXM (S912)
>
> There is also a hardware bitstream parser (ESPARSER) that is handled here.
>
> Tested-by: Neil Armstrong <narmstrong@baylibre.com>
> Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
> ---
> drivers/media/platform/Kconfig | 10 +
> drivers/media/platform/meson/Makefile | 1 +
> drivers/media/platform/meson/vdec/Makefile | 8 +
> .../media/platform/meson/vdec/codec_mpeg12.c | 209 ++++
> .../media/platform/meson/vdec/codec_mpeg12.h | 14 +
> drivers/media/platform/meson/vdec/dos_regs.h | 98 ++
> drivers/media/platform/meson/vdec/esparser.c | 323 +++++
> drivers/media/platform/meson/vdec/esparser.h | 32 +
> drivers/media/platform/meson/vdec/vdec.c | 1071 +++++++++++++++++
> drivers/media/platform/meson/vdec/vdec.h | 265 ++++
> drivers/media/platform/meson/vdec/vdec_1.c | 229 ++++
> drivers/media/platform/meson/vdec/vdec_1.h | 14 +
> .../media/platform/meson/vdec/vdec_ctrls.c | 51 +
> .../media/platform/meson/vdec/vdec_ctrls.h | 14 +
> .../media/platform/meson/vdec/vdec_helpers.c | 441 +++++++
> .../media/platform/meson/vdec/vdec_helpers.h | 80 ++
> .../media/platform/meson/vdec/vdec_platform.c | 107 ++
> .../media/platform/meson/vdec/vdec_platform.h | 30 +
> 18 files changed, 2997 insertions(+)
> create mode 100644 drivers/media/platform/meson/vdec/Makefile
> create mode 100644 drivers/media/platform/meson/vdec/codec_mpeg12.c
> create mode 100644 drivers/media/platform/meson/vdec/codec_mpeg12.h
> create mode 100644 drivers/media/platform/meson/vdec/dos_regs.h
> create mode 100644 drivers/media/platform/meson/vdec/esparser.c
> create mode 100644 drivers/media/platform/meson/vdec/esparser.h
> create mode 100644 drivers/media/platform/meson/vdec/vdec.c
> create mode 100644 drivers/media/platform/meson/vdec/vdec.h
> create mode 100644 drivers/media/platform/meson/vdec/vdec_1.c
> create mode 100644 drivers/media/platform/meson/vdec/vdec_1.h
> create mode 100644 drivers/media/platform/meson/vdec/vdec_ctrls.c
> create mode 100644 drivers/media/platform/meson/vdec/vdec_ctrls.h
> create mode 100644 drivers/media/platform/meson/vdec/vdec_helpers.c
> create mode 100644 drivers/media/platform/meson/vdec/vdec_helpers.h
> create mode 100644 drivers/media/platform/meson/vdec/vdec_platform.c
> create mode 100644 drivers/media/platform/meson/vdec/vdec_platform.h
>
<snip>
> diff --git a/drivers/media/platform/meson/vdec/vdec_ctrls.c b/drivers/media/platform/meson/vdec/vdec_ctrls.c
> new file mode 100644
> index 000000000000..d5d6b1b97aa5
> --- /dev/null
> +++ b/drivers/media/platform/meson/vdec/vdec_ctrls.c
> @@ -0,0 +1,51 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2018 BayLibre, SAS
> + * Author: Maxime Jourdan <mjourdan@baylibre.com>
> + */
> +
> +#include "vdec_ctrls.h"
> +
> +static int vdec_op_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
> +{
> + struct amvdec_session *sess =
> + container_of(ctrl->handler, struct amvdec_session, ctrl_handler);
> +
> + switch (ctrl->id) {
> + case V4L2_CID_MIN_BUFFERS_FOR_CAPTURE:
> + ctrl->val = sess->dpb_size;
> + break;
> + default:
> + return -EINVAL;
> + };
> +
> + return 0;
> +}
> +
> +static const struct v4l2_ctrl_ops vdec_ctrl_ops = {
> + .g_volatile_ctrl = vdec_op_g_volatile_ctrl,
> +};
> +
> +int amvdec_init_ctrls(struct v4l2_ctrl_handler *ctrl_handler)
> +{
> + int ret;
> + struct v4l2_ctrl *ctrl;
> +
> + ret = v4l2_ctrl_handler_init(ctrl_handler, 1);
> + if (ret)
> + return ret;
> +
> + ctrl = v4l2_ctrl_new_std(ctrl_handler, &vdec_ctrl_ops,
> + V4L2_CID_MIN_BUFFERS_FOR_CAPTURE, 1, 32, 1, 1);
> + if (ctrl)
> + ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;
Why is this volatile? That makes little sense.
> +
> + ret = ctrl_handler->error;
> + if (ret) {
> + v4l2_ctrl_handler_free(ctrl_handler);
> + return ret;
> + }
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(amvdec_init_ctrls);
<snip>
Regards,
Hans
next prev parent reply other threads:[~2019-05-27 10:04 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-14 13:56 [PATCH v6 0/4] Add Amlogic video decoder driver Maxime Jourdan
2019-05-14 13:56 ` [PATCH v6 1/4] dt-bindings: media: add Amlogic Video Decoder Bindings Maxime Jourdan
2019-05-14 18:46 ` Martin Blumenstingl
2019-05-14 13:56 ` [PATCH v6 2/4] media: videodev2: add V4L2_FMT_FLAG_FIXED_RESOLUTION Maxime Jourdan
2019-05-14 13:56 ` [PATCH v6 3/4] media: meson: add v4l2 m2m video decoder driver Maxime Jourdan
2019-05-27 10:04 ` Hans Verkuil [this message]
2019-05-27 10:18 ` Neil Armstrong
2019-05-27 10:31 ` Hans Verkuil
2019-05-27 14:44 ` Maxime Jourdan
2019-05-27 14:54 ` Hans Verkuil
2019-05-27 15:41 ` Maxime Jourdan
2019-05-14 13:56 ` [PATCH v6 4/4] MAINTAINERS: Add meson video decoder Maxime Jourdan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=07af1a22-d57c-aff6-b476-98fbf72135c1@xs4all.nl \
--to=hverkuil@xs4all.nl \
--cc=hans.verkuil@cisco.com \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=mchehab@kernel.org \
--cc=mjourdan@baylibre.com \
--cc=narmstrong@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).