Re: [PATCH v2 04/18] media: i2c: rdacm20: Replace goto with a loop

[Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>]

Hi Jacopo,

On 15/03/2021 13:14, Jacopo Mondi wrote:
> During the camera module initialization the image sensor PID is read to
> verify it can correctly be identified. The current implementation is
> rather confused and uses a loop implemented with a label and a goto.
> 
> Replace it with a more compact for() loop.
> 
> No functional changes intended.
> 
> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> ---
>  drivers/media/i2c/rdacm20.c | 29 +++++++++++++----------------
>  1 file changed, 13 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/media/i2c/rdacm20.c b/drivers/media/i2c/rdacm20.c
> index 4d9bac87cba8..e190fd2e611a 100644
> --- a/drivers/media/i2c/rdacm20.c
> +++ b/drivers/media/i2c/rdacm20.c
> @@ -59,6 +59,8 @@
>   */
>  #define OV10635_PIXEL_RATE		(44000000)
>  
> +#define OV10635_PID_TIMEOUT		3
> +
>  static const struct ov10635_reg {
>  	u16	reg;
>  	u8	val;
> @@ -452,7 +454,7 @@ static const struct v4l2_subdev_ops rdacm20_subdev_ops = {
>  
>  static int rdacm20_initialize(struct rdacm20_device *dev)
>  {
> -	unsigned int retry = 3;
> +	unsigned int i;
>  	int ret;
>  
>  	/* Verify communication with the MAX9271: ping to wakeup. */
> @@ -501,23 +503,18 @@ static int rdacm20_initialize(struct rdacm20_device *dev)
>  		return ret;
>  	usleep_range(10000, 15000);
>  
> -again:
> -	ret = ov10635_read16(dev, OV10635_PID);
> -	if (ret < 0) {
> -		if (retry--)
> -			goto again;
> +	for (i = 0; i < OV10635_PID_TIMEOUT; ++i) {
> +		ret = ov10635_read16(dev, OV10635_PID);
> +		if (ret == OV10635_VERSION)
> +			break;
> +		else if (ret >= 0)
> +			/* Sometimes we get a successful read but a wrong id. */

Trivial/nit, I'd have written "but an incorrect ID."

But that's not worthy of any respin.

> +			dev_dbg(dev->dev, "OV10635 ID mismatch (%d)\n", ret);

Thanks, this alleviates my concerns from the previous version.



>  
> -		dev_err(dev->dev, "OV10635 ID read failed (%d)\n",
> -			ret);
> -		return -ENXIO;
> +		usleep_range(1000, 2000);
>  	}
> -
> -	if (ret != OV10635_VERSION) {
> -		if (retry--)
> -			goto again;
> -
> -		dev_err(dev->dev, "OV10635 ID mismatch (0x%04x)\n",
> -			ret);
> +	if (i == OV10635_PID_TIMEOUT) {
> +		dev_err(dev->dev, "OV10635 ID read failed (%d)\n", ret);
>  		return -ENXIO;
>  	}
>  
>