From: Baolin Wang <baolin.wang7@gmail.com>
To: sre@kernel.org
Cc: baolin.wang7@gmail.com, orsonzhai@gmail.com,
zhang.lyra@gmail.com, yuanjiang.yu@unisoc.com,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 4/4] power: supply: sc27xx: Add boot voltage support
Date: Mon, 20 Apr 2020 11:42:07 +0800 [thread overview]
Message-ID: <098bc90ca87402ba08cec6df81fe3465eeb10e00.1587353854.git.baolin.wang7@gmail.com> (raw)
In-Reply-To: <cover.1587353854.git.baolin.wang7@gmail.com>
In-Reply-To: <cover.1587353854.git.baolin.wang7@gmail.com>
From: Yuanjiang Yu <yuanjiang.yu@unisoc.com>
Add new property to allow to get the voltage measured during boot time.
Signed-off-by: Yuanjiang Yu <yuanjiang.yu@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
---
drivers/power/supply/sc27xx_fuel_gauge.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/power/supply/sc27xx_fuel_gauge.c b/drivers/power/supply/sc27xx_fuel_gauge.c
index 82d0c64ef269..be42e814ea34 100644
--- a/drivers/power/supply/sc27xx_fuel_gauge.c
+++ b/drivers/power/supply/sc27xx_fuel_gauge.c
@@ -84,6 +84,7 @@
* @init_clbcnt: the initial coulomb counter
* @max_volt: the maximum constant input voltage in millivolt
* @min_volt: the minimum drained battery voltage in microvolt
+ * @boot_volt: the voltage measured during boot in microvolt
* @table_len: the capacity table length
* @resist_table_len: the resistance table length
* @cur_1000ma_adc: ADC value corresponding to 1000 mA
@@ -109,6 +110,7 @@ struct sc27xx_fgu_data {
int init_clbcnt;
int max_volt;
int min_volt;
+ int boot_volt;
int table_len;
int resist_table_len;
int cur_1000ma_adc;
@@ -321,6 +323,7 @@ static int sc27xx_fgu_get_boot_capacity(struct sc27xx_fgu_data *data, int *cap)
volt = sc27xx_fgu_adc_to_voltage(data, volt);
ocv = volt * 1000 - oci * data->internal_resist;
+ data->boot_volt = ocv;
/*
* Parse the capacity table to look up the correct capacity percent
@@ -680,6 +683,10 @@ static int sc27xx_fgu_get_property(struct power_supply *psy,
val->intval = value * 1000;
break;
+ case POWER_SUPPLY_PROP_VOLTAGE_BOOT:
+ val->intval = data->boot_volt;
+ break;
+
default:
ret = -EINVAL;
break;
@@ -750,6 +757,7 @@ static enum power_supply_property sc27xx_fgu_props[] = {
POWER_SUPPLY_PROP_VOLTAGE_NOW,
POWER_SUPPLY_PROP_VOLTAGE_OCV,
POWER_SUPPLY_PROP_VOLTAGE_AVG,
+ POWER_SUPPLY_PROP_VOLTAGE_BOOT,
POWER_SUPPLY_PROP_CURRENT_NOW,
POWER_SUPPLY_PROP_CURRENT_AVG,
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
--
2.17.1
next prev parent reply other threads:[~2020-04-20 3:42 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-20 3:42 [PATCH 0/4] Add some new properties for the SC27XX fuel gauge Baolin Wang
2020-04-20 3:42 ` [PATCH 1/4] power: supply: sc27xx: Set 'no_thermal' flag for SC27xx " Baolin Wang
2020-04-20 3:42 ` [PATCH 2/4] power: supply: sc27xx: Allow to change the battery full capacity Baolin Wang
2020-04-20 3:42 ` [PATCH 3/4] power: supply: sc27xx: Add CURRENT_NOW/VOLTAGE_NOW properties support Baolin Wang
2020-04-20 3:42 ` Baolin Wang [this message]
2020-04-28 19:26 ` [PATCH 0/4] Add some new properties for the SC27XX fuel gauge Sebastian Reichel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=098bc90ca87402ba08cec6df81fe3465eeb10e00.1587353854.git.baolin.wang7@gmail.com \
--to=baolin.wang7@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=orsonzhai@gmail.com \
--cc=sre@kernel.org \
--cc=yuanjiang.yu@unisoc.com \
--cc=zhang.lyra@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).