From: Hon Weng Chong <honwchong@gmail.com>
To: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Marcel Holtmann <marcel@holtmann.org>,
"Gustavo F. Padovan" <gustavo@padovan.org>,
Johan Hedberg <johan.hedberg@gmail.com>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
linux-bluetooth@vger.kernel.org
Subject: Re: [PATCH] bluetooth: btusb: Add device ID for RTL8822BE
Date: Wed, 15 Nov 2017 10:40:35 +1100 [thread overview]
Message-ID: <0FED073A-DD17-4075-A7FD-15BD4615987E@gmail.com> (raw)
In-Reply-To: <a2c8efa7-6acb-fc97-8401-87bbc9e3d618@lwfinger.net>
Hi Larry,
Apologies for the delayed reply. Here's the data for the Realtek Bluetooth Device:
T: Bus=01 Lev=01 Prnt=01 Port=13 Cnt=07 Dev#= 14 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0b05 ProdID=185c Rev= 1.10
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> On 12 Nov 2017, at 6:10 am, Larry Finger <Larry.Finger@lwfinger.net> wrote:
>
> On 11/11/2017 12:51 PM, Marcel Holtmann wrote:
>> Hi Larry,
>>> The Asus Z370-I contains a Realtek RTL8822BE device with an associated
>>> BT chip using a USB ID of 0b05:185c. This device is added to the driver.
>>>
>>> Signed-off-by: Hon Weng Chong <honwchong@gmail.com>
>>> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
>>> ---
>>> drivers/bluetooth/btusb.c | 3 +++
>>> 1 file changed, 3 insertions(+)
>>>
>>> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
>>> index 7a5c06aaa181..c265ef63cab7 100644
>>> --- a/drivers/bluetooth/btusb.c
>>> +++ b/drivers/bluetooth/btusb.c
>>> @@ -373,6 +373,9 @@ static const struct usb_device_id blacklist_table[] = {
>>> { USB_DEVICE(0x13d3, 0x3461), .driver_info = BTUSB_REALTEK },
>>> { USB_DEVICE(0x13d3, 0x3462), .driver_info = BTUSB_REALTEK },
>>>
>>> + /* Additional Realtek 8822BE Bluetooth devices */
>>> + { USB_DEVICE(0x0b05, 0x1185c), .driver_info = BTUSB_REALTEK },
>>> +
>> I prefer to have /sys/kernel/debug/usb/devices for the device included in the commit message.
>> Regards
>> Marcel
> Hon,
>
> Please provide the data.
>
> Larry
>
next prev parent reply other threads:[~2017-11-14 23:40 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-11 17:43 [PATCH] bluetooth: btusb: Add device ID for RTL8822BE Larry Finger
2017-11-11 18:51 ` Marcel Holtmann
2017-11-11 19:10 ` Larry Finger
2017-11-14 23:40 ` Hon Weng Chong [this message]
2017-11-12 13:45 ` Bjørn Mork
2017-11-14 9:22 ` kbuild test robot
2017-11-14 9:30 ` kbuild test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0FED073A-DD17-4075-A7FD-15BD4615987E@gmail.com \
--to=honwchong@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=gustavo@padovan.org \
--cc=johan.hedberg@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).