linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Syed Nayyar Waris <syednwaris@gmail.com>
To: linus.walleij@linaro.org
Cc: andriy.shevchenko@linux.intel.com, vilhelm.gray@gmail.com,
	bgolaszewski@baylibre.com, michal.simek@xilinx.com,
	linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v9 4/4] gpio: xilinx: Utilize generic bitmap_get_value and _set_value.
Date: Sat, 27 Jun 2020 13:44:23 +0530	[thread overview]
Message-ID: <0a35c10d1613aff43038bc7d4d6f95061d9d80d3.1593243081.git.syednwaris@gmail.com> (raw)
In-Reply-To: <cover.1593243079.git.syednwaris@gmail.com>

This patch reimplements the xgpio_set_multiple function in
drivers/gpio/gpio-xilinx.c to use the new generic functions:
bitmap_get_value and bitmap_set_value. The code is now simpler
to read and understand. Moreover, instead of looping for each bit
in xgpio_set_multiple function, now we can check each channel at
a time and save cycles.
---
Changes in v9:
 - Remove looping of 'for_each_set_clump' and instead process two
   halves of a 64-bit bitmap separately or individually. Use normal spin_lock 
   call for second inner lock. And take the spin_lock_init call outside the 'if'
   condition in the 'probe' function of driver.

Changes in v8:
 - No change.

Changes in v7:
 - No change.

Changes in v6:
 - No change.

Changes in v5:
 - Minor change: Inline values '32' and '64' in code for better
   code readability.

Changes in v4:
 - Minor change: Inline values '32' and '64' in code for better
   code readability.

Changes in v3:
 - No change.

Changes in v2:
 - No change

 drivers/gpio/gpio-xilinx.c | 66 +++++++++++++++++++-------------------
 1 file changed, 33 insertions(+), 33 deletions(-)

diff --git a/drivers/gpio/gpio-xilinx.c b/drivers/gpio/gpio-xilinx.c
index 67f9f82e0db0..48393d06fb55 100644
--- a/drivers/gpio/gpio-xilinx.c
+++ b/drivers/gpio/gpio-xilinx.c
@@ -136,39 +136,39 @@ static void xgpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
 static void xgpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
 			       unsigned long *bits)
 {
-	unsigned long flags;
+	unsigned long flag;
 	struct xgpio_instance *chip = gpiochip_get_data(gc);
-	int index = xgpio_index(chip, 0);
-	int offset, i;
-
-	spin_lock_irqsave(&chip->gpio_lock[index], flags);
-
-	/* Write to GPIO signals */
-	for (i = 0; i < gc->ngpio; i++) {
-		if (*mask == 0)
-			break;
-		/* Once finished with an index write it out to the register */
-		if (index !=  xgpio_index(chip, i)) {
-			xgpio_writereg(chip->regs + XGPIO_DATA_OFFSET +
-				       index * XGPIO_CHANNEL_OFFSET,
-				       chip->gpio_state[index]);
-			spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
-			index =  xgpio_index(chip, i);
-			spin_lock_irqsave(&chip->gpio_lock[index], flags);
-		}
-		if (__test_and_clear_bit(i, mask)) {
-			offset =  xgpio_offset(chip, i);
-			if (test_bit(i, bits))
-				chip->gpio_state[index] |= BIT(offset);
-			else
-				chip->gpio_state[index] &= ~BIT(offset);
-		}
-	}
-
-	xgpio_writereg(chip->regs + XGPIO_DATA_OFFSET +
-		       index * XGPIO_CHANNEL_OFFSET, chip->gpio_state[index]);
-
-	spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
+	u32 *const state = chip->gpio_state;
+	unsigned int *const width = chip->gpio_width;
+
+	DECLARE_BITMAP(old, 64);
+	DECLARE_BITMAP(new, 64);
+	DECLARE_BITMAP(changed, 64);
+
+	spin_lock_irqsave(&chip->gpio_lock[0], flag);
+	spin_lock(&chip->gpio_lock[1]);
+
+	bitmap_set_value(old, state[0], 0, width[0]);
+	bitmap_set_value(old, state[1], width[0], width[1]);
+	bitmap_replace(new, old, bits, mask, gc->ngpio);
+
+	bitmap_set_value(old, state[0], 0, 32);
+	bitmap_set_value(old, state[1], 32, 32);
+	state[0] = bitmap_get_value(new, 0, width[0]);
+	state[1] = bitmap_get_value(new, width[0], width[1]);
+	bitmap_set_value(new, state[0], 0, 32);
+	bitmap_set_value(new, state[1], 32, 32);
+	bitmap_xor(changed, old, new, 64);
+
+	if (((u32 *)changed)[0])
+		xgpio_writereg(chip->regs + XGPIO_DATA_OFFSET,
+				state[0]);
+	if (((u32 *)changed)[1])
+		xgpio_writereg(chip->regs + XGPIO_DATA_OFFSET +
+				XGPIO_CHANNEL_OFFSET, state[1]);
+
+	spin_unlock(&chip->gpio_lock[1]);
+	spin_unlock_irqrestore(&chip->gpio_lock[0], flag);
 }
 
 /**
@@ -292,6 +292,7 @@ static int xgpio_probe(struct platform_device *pdev)
 		chip->gpio_width[0] = 32;
 
 	spin_lock_init(&chip->gpio_lock[0]);
+	spin_lock_init(&chip->gpio_lock[1]);
 
 	if (of_property_read_u32(np, "xlnx,is-dual", &is_dual))
 		is_dual = 0;
@@ -314,7 +315,6 @@ static int xgpio_probe(struct platform_device *pdev)
 					 &chip->gpio_width[1]))
 			chip->gpio_width[1] = 32;
 
-		spin_lock_init(&chip->gpio_lock[1]);
 	}
 
 	chip->gc.base = -1;
-- 
2.26.2


  parent reply	other threads:[~2020-06-27  8:14 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-27  8:09 [PATCH v9 0/4] Introduce the for_each_set_clump macro Syed Nayyar Waris
2020-06-27  8:10 ` [PATCH v9 1/4] bitops: " Syed Nayyar Waris
2020-06-27  8:11 ` [PATCH v9 2/4] lib/test_bitmap.c: Add for_each_set_clump test cases Syed Nayyar Waris
2020-06-27  8:13 ` [PATCH v9 3/4] gpio: thunderx: Utilize for_each_set_clump macro Syed Nayyar Waris
2020-06-27  8:14 ` Syed Nayyar Waris [this message]
2020-07-08 12:54   ` [PATCH v9 4/4] gpio: xilinx: Utilize generic bitmap_get_value and _set_value William Breathitt Gray
2020-07-10  8:04 ` [PATCH v9 0/4] Introduce the for_each_set_clump macro Syed Nayyar Waris
2020-07-16 12:49 ` Linus Walleij
2020-08-31 15:37   ` Syed Nayyar Waris
2020-09-11 22:54   ` William Breathitt Gray
2020-09-29 12:45     ` Linus Walleij
2020-09-29 13:07       ` William Breathitt Gray
2020-09-29 13:14         ` Andy Shevchenko
2020-09-30  9:29           ` Linus Walleij
2020-10-02 20:58             ` Syed Nayyar Waris

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=0a35c10d1613aff43038bc7d4d6f95061d9d80d3.1593243081.git.syednwaris@gmail.com \
    --to=syednwaris@gmail.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michal.simek@xilinx.com \
    --cc=vilhelm.gray@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).