On 11/05/2018 07:27 AM, Faiz Abbas wrote:
> I remove the transceiver child node binding documentation in patch 5/6.
> 
> The existing implementation is pretty limiting as it just has a child
> node with no associated device. What if a transceiver requires its own
> configurations before it can start sending/receiving messages (for
> example, my usecase requires it to pull the standby line low)?
> 
> I think that can be solved by implementing the transceiver as a phy and
> exposing a generic get_max_bitrate API. That way, the transceiver device
> can do all its startup configuration in the phy probe function.
> 
> In any case, do suggest if you have a better idea on how to implement
> pull gpio low requirement.

As long as we don't have any proper transceiver/phy driver, that does
more than swtich on/off a GPIO, please add a "xceiver" regulator to your
driver. Look for:

> devm_regulator_get(&pdev->dev, "xceiver");

in the flexcan driver.

Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |