linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Lendacky, Thomas" <Thomas.Lendacky@amd.com>
To: Baoquan He <bhe@redhat.com>
Cc: "kexec@lists.infradead.org" <kexec@lists.infradead.org>,
	"x86@kernel.org" <x86@kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: The current SME implementation fails kexec/kdump kernel booting.
Date: Wed, 5 Jun 2019 16:04:14 +0000	[thread overview]
Message-ID: <0d9fba9d-7bbe-a7c7-dfe4-696da0dfecc4@amd.com> (raw)
In-Reply-To: <20190605005600.GF26891@MiWiFi-R3L-srv>

On 6/4/19 7:56 PM, Baoquan He wrote:
> On 06/04/19 at 03:56pm, Lendacky, Thomas wrote:
>> On 6/4/19 8:49 AM, Baoquan He wrote:
>>> Hi Tom,
>>>
>>> Lianbo reported kdump kernel can't boot well with 'nokaslr' added, and
>>> have to enable KASLR in kdump kernel to make it boot successfully. This
>>> blocked his work on enabling sme for kexec/kdump. And on some machines
>>> SME kernel can't boot in 1st kernel.
>>>
>>> I checked code of SME implementation, and found out the root cause. The
>>> above failures are caused by SME code, sme_encrypt_kernel(). In
>>> sme_encrypt_kernel(), you get a 2M of encryption work area as intermediate
>>> buffer to encrypt kernel in-place. And the work area is just after _end of
>>> kernel.
>>
>> I remember worrying about something like this back when I was testing the
>> kexec support. I had come up with a patch to address it, but never got the
>> time to test and submit it.  I've included it here if you'd like to test
>> it (I haven't done run this patch in quite some time). If it works, we can
>> think about submitting it.
> 
> Thanks for your quick response and making this patch, Tom.
> 
> Tested on a speedway machine, it entered into kernel, but failed in
> below stage. Tested two times, always happened.

Is this the initial kernel boot or the kexec kernel boot?

It looks like this is related to the initrd/initramfs decryption. Not
sure what could be happening there. I just tried the patch on my Naples
system and a 5.2.0-rc3 kernel and have been able to repeatedly kexec boot
a number of times so far.

Thanks,
Tom

> 
> 
> [    4.978521] Freeing unused decrypted memory: 2040K
> [    4.983800] Freeing unused kernel image memory: 2344K
> [    4.988943] Write protecting the kernel read-only data: 18432k
> [    4.995306] Freeing unused kernel image memory: 2012K
> [    5.000488] Freeing unused kernel image memory: 256K
> [    5.005540] Run /init as init process
> [    5.009443] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00007f00
> [    5.017230] CPU: 0 PID: 1 Comm: init Not tainted 5.2.0-rc2+ #38
> [    5.023251] Hardware name: AMD Corporation Speedway/Speedway, BIOS RSW1004B 10/18/2017
> [    5.031299] Call Trace:
> [    5.033793]  dump_stack+0x46/0x60
> [    5.037169]  panic+0xfb/0x2cb
> [    5.040191]  do_exit.cold.21+0x59/0x81
> [    5.044004]  do_group_exit+0x3a/0xa0
> [    5.047640]  __x64_sys_exit_group+0x14/0x20
> [    5.051899]  do_syscall_64+0x55/0x1c0
> [    5.055627]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
> [    5.060764] RIP: 0033:0x7fa1b1fc9e2e
> [    5.064404] Code: Bad RIP value.
> [    5.067687] RSP: 002b:00007fffc5abb778 EFLAGS: 00000202 ORIG_RAX: 00000000000000e7
> [    5.075296] RAX: ffffffffffffffda RBX: 00007fa1b1fd2528 RCX: 00007fa1b1fc9e2e
> [    5.082625] RDX: 000000000000007f RSI: 000000000000003c RDI: 000000000000007f
> [    5.089879] RBP: 00007fa1b21d8d00 R08: 00000000000000e7 R09: 00007fffc5abb688
> [    5.097134] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000002
> [    5.104386] R13: 0000000000000001 R14: 00007fa1b21d8d40 R15: 00007fa1b21d8d30
> [    5.111645] Kernel Offset: disabled
> [    5.423002] Rebooting in 10 seconds..
> [   15.429641] ACPI MEMORY or I/O RESET_REG.
> 

  reply	other threads:[~2019-06-05 16:05 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-04 13:49 The current SME implementation fails kexec/kdump kernel booting Baoquan He
2019-06-04 15:56 ` Lendacky, Thomas
2019-06-05  0:56   ` Baoquan He
2019-06-05 16:04     ` Lendacky, Thomas [this message]
2019-06-05 22:57       ` Baoquan He
2019-06-09  3:45       ` lijiang
2019-06-11  9:52         ` lijiang
2019-06-11 10:24           ` Baoquan He

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=0d9fba9d-7bbe-a7c7-dfe4-696da0dfecc4@amd.com \
    --to=thomas.lendacky@amd.com \
    --cc=bhe@redhat.com \
    --cc=kexec@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).