From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757856AbcLTMIl (ORCPT ); Tue, 20 Dec 2016 07:08:41 -0500 Received: from smtp.codeaurora.org ([198.145.29.96]:51268 "EHLO smtp.codeaurora.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754020AbcLTMIj (ORCPT ); Tue, 20 Dec 2016 07:08:39 -0500 DMARC-Filter: OpenDMARC Filter v1.3.1 smtp.codeaurora.org 60628611B7 Authentication-Results: pdx-caf-mail.web.codeaurora.org; dmarc=none header.from=codeaurora.org Authentication-Results: pdx-caf-mail.web.codeaurora.org; spf=pass smtp.mailfrom=riteshh@codeaurora.org Subject: Re: [PATCH 2/4] mmc: mmc: Add change to set controller to HS400 frequency in enhanced strobe To: Shawn Lin , ulf.hansson@linaro.org, adrian.hunter@intel.com References: <1482213199-29152-1-git-send-email-riteshh@codeaurora.org> <1482213199-29152-3-git-send-email-riteshh@codeaurora.org> <5a9ad9e8-6fc5-1a33-6119-7c411df4b6e0@rock-chips.com> <1412bf82-6292-20a5-3086-c8dccae930a4@codeaurora.org> <1419cbfe-5f37-f300-ca6e-7ee39c1d1e29@rock-chips.com> Cc: linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org, stummala@codeaurora.org, georgi.djakov@linaro.org, linux-arm-msm@vger.kernel.org, pramod.gurav@linaro.org, jeremymc@redhat.com, venkatg@codeaurora.org, asutoshd@codeaurora.org From: Ritesh Harjani Message-ID: <0db75984-bd05-5d63-91f0-e303e56d83d3@codeaurora.org> Date: Tue, 20 Dec 2016 17:38:29 +0530 User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Thunderbird/45.5.1 MIME-Version: 1.0 In-Reply-To: <1419cbfe-5f37-f300-ca6e-7ee39c1d1e29@rock-chips.com> Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Shawn, On 12/20/2016 4:33 PM, Shawn Lin wrote: > On 2016/12/20 18:33, Ritesh Harjani wrote: >> Hi Shawn, >> >> On 12/20/2016 12:59 PM, Shawn Lin wrote: >>> On 2016/12/20 13:53, Ritesh Harjani wrote: >>>> Currently mmc_select_hs400es is not setting the desired frequency >>>> before sending switch command. This makes CMD13 to timeout on >>>> some controllers. >>>> Thus add a change to set the desired HS400 frequency >>>> in mmc_select_hs400es when the timing is switched to HS400. >>> >>> What is the desired HS400 freq? I guess it is 200MHz, right? >>> >>> Well, per the spec, it just say "host *may* changes frequency to >>> <= 200Mhz". So before setting timing to MMC_TIMING_MMC_HS400, we >>> already reach ext_csd.hs_max_dtr. So it should meet the spec. If >>> the fact that some controllers would see CMD13 timeout here, I guess >>> you wouldn't let folks add max-frequency to the DT as if the max freq >>> is set to just lower than your *desired HS400 freq* , it the same >>> failure result even you add this patch, right? >>> >>> the root cause the controllers see failure for CMD13 is it didn't >>> configure the right delay phase or something similar to fit the timing >>> under the freq of hs_max_dtr, I guess. >> Actually this may be limitation of sdhc msm controller that it cannot >> work at lower frequency while in HS400 mode. I would have to see more on >> this to confirm on why this limitation is there (mostly it was with some >> DLL limitation). >> In that case maybe I should not generalize this for other controllers. >> >> >> But still the below code change to set the bus_speed after setting the >> timing should be fine right ? Since host controller may as well change >> the frequency to 200MHz. > > maybe not, I was guessing what would happend when folks add > max-frequency = <100000000> as well as mmc-hs400-enhanced-strobe in > the DT? It won't work for your case. So the question is how you would > make that case work? > >> >> Do you think the below change is fine in this sense? I can change the >> commit message to just - >> "set both timing mode and frequency before sending CMD13 in >> mmc_select_hs400es." >> >> Or do you see any other approach to this ? >> > > I haven't had clear thought about how to deal with it but > I guess you are not alone for this case maybe. Now there > will be more and more mmc controllers using PHY or DLL and > some more special limitions is ineluctable, so we need to > discuss a more general/legit way to make it work. > > Your patch is a good begin to open this topic. :) > I would like to hear some input from Ulf and Adian. I see there is a miss from my side here. Although there is still some limitation on msm host controller which I cannot recollect. But for this case we can get it done by configuring the DLL properly. I missed that particular check of clock >= 100MHz in sdhci_msm_set_uhs_signaling which configures the DLL. I guess if I could use the host->mmc_host_ops.hs400_enhanced_strobe ops and provide a callback to configure the DLL without any restriction on clock frequency, then this can be worked out. I will check more on this and get back. Thanks for your inputs. Regards Ritesh > >> >> Regards >> Ritesh >> >>> >>>> >>>> Signed-off-by: Ritesh Harjani >>>> --- >>>> drivers/mmc/core/mmc.c | 1 + >>>> 1 file changed, 1 insertion(+) >>>> >>>> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c >>>> index b61b52f9..eb69497 100644 >>>> --- a/drivers/mmc/core/mmc.c >>>> +++ b/drivers/mmc/core/mmc.c >>>> @@ -1329,6 +1329,7 @@ static int mmc_select_hs400es(struct mmc_card >>>> *card) >>>> >>>> /* Set host controller to HS400 timing and frequency */ >>>> mmc_set_timing(host, MMC_TIMING_MMC_HS400); >>>> + mmc_set_bus_speed(card); >>>> >>>> /* Controller enable enhanced strobe function */ >>>> host->ios.enhanced_strobe = true; >>>> >>> >>> >> > > -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project