Re: Qestion about device link

["chenxiang (M)" <chenxiang66@hisilicon.com>]

Hi Rafael,


在 2021/5/12 22:04, Rafael J. Wysocki 写道:
> On Wednesday, May 12, 2021 5:24:53 AM CEST chenxiang (M) wrote:
>> Hi Rafael,
>>
>>
>> 在 2021/5/12 3:16, Rafael J. Wysocki 写道:
>>> On Tuesday, May 11, 2021 4:39:31 PM CEST Rafael J. Wysocki wrote:
>>>> On 5/11/2021 5:59 AM, chenxiang (M) wrote:
>>>>> Hi Rafael and other guys,
>>>>>
>>>>> I am trying to add a device link between scsi_host->shost_gendev and
>>>>> hisi_hba->dev to support runtime PM for hisi_hba driver
>>>>>
>>>>> (as it supports runtime PM for scsi host in some scenarios such as
>>>>> error handler etc, we can avoid to do them again if adding a
>>>>>
>>>>> device link between scsi_host->shost_gendev and hisi_hba->dev) as
>>>>> follows (hisi_sas driver is under directory drivers/scsi/hisi_sas):
>>>>>
>>>>> device_link_add(&shost->shost_gendev, hisi_hba->dev,
>>>>> DL_FLAG_PM_RUNTIME | DL_FLAG_RPM_ACTIVE)
>>>>>
>>>>> We have a full test on it, and it works well except when rmmod the
>>>>> driver, some call trace occurs as follows:
>>>>>
>>>>> [root@localhost ~]# rmmod hisi_sas_v3_hw
>>>>> [  105.377944] BUG: scheduling while atomic: kworker/113:1/811/0x00000201
>>>>> [  105.384469] Modules linked in: bluetooth rfkill ib_isert
>>>>> iscsi_target_mod ib_ipoib ib_umad iptable_filter vfio_iommu_type1
>>>>> vfio_pci vfio_virqfd vfio rpcrdma ib_is                         er
>>>>> libiscsi scsi_transport_iscsi crct10dif_ce sbsa_gwdt hns_roce_hw_v2
>>>>> hisi_sec2 hisi_hpre hisi_zip hisi_qm uacce spi_hisi_sfc_v3xx
>>>>> hisi_trng_v2 rng_core hisi_uncore                         _hha_pmu
>>>>> hisi_uncore_ddrc_pmu hisi_uncore_l3c_pmu spi_dw_mmio hisi_uncore_pmu
>>>>> hns3 hclge hnae3 hisi_sas_v3_hw(-) hisi_sas_main libsas
>>>>> [  105.424841] CPU: 113 PID: 811 Comm: kworker/113:1 Kdump: loaded
>>>>> Tainted: G        W         5.12.0-rc1+ #1
>>>>> [  105.434454] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS
>>>>> 2280-V2 CS V5.B143.01 04/22/2021
>>>>> [  105.443287] Workqueue: rcu_gp srcu_invoke_callbacks
>>>>> [  105.448154] Call trace:
>>>>> [  105.450593]  dump_backtrace+0x0/0x1a4
>>>>> [  105.454245]  show_stack+0x24/0x40
>>>>> [  105.457548]  dump_stack+0xc8/0x104
>>>>> [  105.460939]  __schedule_bug+0x68/0x80
>>>>> [  105.464590]  __schedule+0x73c/0x77c
>>>>> [  105.465700] BUG: scheduling while atomic: kworker/96:1/791/0x00000201
>>>>> [  105.468066]  schedule+0x7c/0x110
>>>>> [  105.468068]  schedule_timeout+0x194/0x1d4
>>>>> [  105.474490] Modules linked in:
>>>>> [  105.477692]  wait_for_completion+0x8c/0x12c
>>>>> [  105.477695]  rcu_barrier+0x1e0/0x2fc
>>>>> [  105.477697]  scsi_host_dev_release+0x50/0xf0
>>>>> [  105.477701]  device_release+0x40/0xa0
>>>>> [  105.477704]  kobject_put+0xac/0x100
>>>>> [  105.477707]  __device_link_free_srcu+0x50/0x74
>>>>> [  105.477709]  srcu_invoke_callbacks+0x108/0x1a4
>>>>> [  105.484743]  process_one_work+0x1dc/0x48c
>>>>> [  105.492468]  worker_thread+0x7c/0x464
>>>>> [  105.492471]  kthread+0x168/0x16c
>>>>> [  105.492473]  ret_from_fork+0x10/0x18
>>>>> ...
>>>>>
>>>>> After analyse the process, we find that it will
>>>>> device_del(&shost->gendev) in function scsi_remove_host() and then
>>>>>
>>>>> put_device(&shost->shost_gendev) in function scsi_host_put() when
>>>>> removing the driver, if there is a link between shost and hisi_hba->dev,
>>>>>
>>>>> it will try to delete the link in device_del(), and also will
>>>>> call_srcu(__device_link_free_srcu) to put_device() link->consumer and
>>>>> supplier.
>>>>>
>>>>> But if put device() for shost_gendev in device_link_free() is later
>>>>> than in scsi_host_put(), it will call scsi_host_dev_release() in
>>>>>
>>>>> srcu_invoke_callbacks() while it is atomic and there are scheduling in
>>>>> scsi_host_dev_release(),
>>>>>
>>>>> so it reports the BUG "scheduling while atomic:...".
>>>>>
>>>>> thread 1                                                   thread2
>>>>> hisi_sas_v3_remove
>>>>>       ...
>>>>>       sas_remove_host()
>>>>>           ...
>>>>>           scsi_remove_host()
>>>>>               ...
>>>>>               device_del(&shost->shost_gendev)
>>>>>                   ...
>>>>>                   device_link_purge()
>>>>>                       __device_link_del()
>>>>>                           device_unregister(&link->link_dev)
>>>>>                               devlink_dev_release
>>>>> call_srcu(__device_link_free_srcu)    ----------->
>>>>> srcu_invoke_callbacks  (atomic)
>>>>>           __device_link_free_srcu
>>>>>       ...
>>>>>       scsi_host_put()
>>>>>           put_device(&shost->shost_gendev) (ref = 1)
>>>>>                   device_link_free()
>>>>>                                 put_device(link->consumer)
>>>>> //shost->gendev ref = 0
>>>>>                                             ...
>>>>>                                             scsi_host_dev_release
>>>>>                                                         ...
>>>>> rcu_barrier
>>>>> kthread_stop()
>>>>>
>>>>>
>>>>> We can check kref of shost->shost_gendev to make sure scsi_host_put()
>>>>> to release scsi host device in LLDD driver to avoid the issue,
>>>>>
>>>>> but it seems be a common issue:  function __device_link_free_srcu
>>>>> calls put_device() for consumer and supplier,
>>>>>
>>>>> but if it's ref =0 at that time and there are scheduling or sleep in
>>>>> dev_release, it may have the issue.
>>>>>
>>>>> Do you have any idea about the issue?
>>>>>
>>>> Yes, this is a general issue.
>>>>
>>>> If I'm not mistaken, it can be addressed by further deferring the
>>>> device_link_free() invocation through a workqueue.
>>>>
>>>> Let me cut a patch doing this.
>>> Please test the patch below and let me know if it works for you.
>> I have a test on the patch, and it solves my issue.
> Great, thanks!
>
> Please also test the patch appended below (it uses a slightly different approach).

I have a test on this change, and it also solves my issue.

>
> ---
>   drivers/base/core.c    |   37 +++++++++++++++++++++++--------------
>   include/linux/device.h |    6 ++----
>   2 files changed, 25 insertions(+), 18 deletions(-)
>
> Index: linux-pm/drivers/base/core.c
> ===================================================================
> --- linux-pm.orig/drivers/base/core.c
> +++ linux-pm/drivers/base/core.c
> @@ -193,6 +193,11 @@ int device_links_read_lock_held(void)
>   {
>   	return srcu_read_lock_held(&device_links_srcu);
>   }
> +
> +void device_link_synchronize_removal(void)
> +{
> +	synchronize_srcu(&device_links_srcu);
> +}
>   #else /* !CONFIG_SRCU */
>   static DECLARE_RWSEM(device_links_lock);
>   
> @@ -223,6 +228,10 @@ int device_links_read_lock_held(void)
>   	return lockdep_is_held(&device_links_lock);
>   }
>   #endif
> +
> +static inline void device_link_synchronize_removal(void)
> +{
> +}
>   #endif /* !CONFIG_SRCU */
>   
>   static bool device_is_ancestor(struct device *dev, struct device *target)
> @@ -444,8 +453,13 @@ static struct attribute *devlink_attrs[]
>   };
>   ATTRIBUTE_GROUPS(devlink);
>   
> -static void device_link_free(struct device_link *link)
> +static void device_link_release_fn(struct work_struct *work)
>   {
> +	struct device_link *link = container_of(work, struct device_link, rm_work);
> +
> +	/* Ensure that all references to the link object have been dropped. */
> +	device_link_synchronize_removal();
> +
>   	while (refcount_dec_not_one(&link->rpm_active))
>   		pm_runtime_put(link->supplier);
>   
> @@ -454,24 +468,19 @@ static void device_link_free(struct devi
>   	kfree(link);
>   }
>   
> -#ifdef CONFIG_SRCU
> -static void __device_link_free_srcu(struct rcu_head *rhead)
> -{
> -	device_link_free(container_of(rhead, struct device_link, rcu_head));
> -}
> -
>   static void devlink_dev_release(struct device *dev)
>   {
>   	struct device_link *link = to_devlink(dev);
>   
> -	call_srcu(&device_links_srcu, &link->rcu_head, __device_link_free_srcu);
> -}
> -#else
> -static void devlink_dev_release(struct device *dev)
> -{
> -	device_link_free(to_devlink(dev));
> +	INIT_WORK(&link->rm_work, device_link_release_fn);
> +	/*
> +	 * It may take a while to complete this work because of the SRCU
> +	 * synchronization in device_link_release_fn() and if the consumer or
> +	 * supplier devices get deleted when it runs, so put it into the "long"
> +	 * workqueue.
> +	 */
> +	queue_work(system_long_wq, &link->rm_work);
>   }
> -#endif
>   
>   static struct class devlink_class = {
>   	.name = "devlink",
> Index: linux-pm/include/linux/device.h
> ===================================================================
> --- linux-pm.orig/include/linux/device.h
> +++ linux-pm/include/linux/device.h
> @@ -570,7 +570,7 @@ struct device {
>    * @flags: Link flags.
>    * @rpm_active: Whether or not the consumer device is runtime-PM-active.
>    * @kref: Count repeated addition of the same link.
> - * @rcu_head: An RCU head to use for deferred execution of SRCU callbacks.
> + * @rm_work: Work structure used for removing the link.
>    * @supplier_preactivated: Supplier has been made active before consumer probe.
>    */
>   struct device_link {
> @@ -583,9 +583,7 @@ struct device_link {
>   	u32 flags;
>   	refcount_t rpm_active;
>   	struct kref kref;
> -#ifdef CONFIG_SRCU
> -	struct rcu_head rcu_head;
> -#endif
> +	struct work_struct rm_work;
>   	bool supplier_preactivated; /* Owned by consumer probe. */
>   };
>   
>
>
>
>
> .
>