Re: [PATCH v11 33/56] Input: atmel_mxt_ts - delay enabling IRQ when not using regulators

From: "Wang, Jiada" <jiada_wang@mentor.com>
To: Dmitry Osipenko <digetx@gmail.com>
Cc: <nick@shmanahar.org>, <dmitry.torokhov@gmail.com>,
	<jikos@kernel.org>, <benjamin.tissoires@redhat.com>,
	<bsz@semihalf.com>, <linux-input@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <erosca@de.adit-jv.com>,
	<Andrew_Gabbasov@mentor.com>
Subject: Re: [PATCH v11 33/56] Input: atmel_mxt_ts - delay enabling IRQ when not using regulators
Date: Mon, 25 May 2020 23:51:11 +0900	[thread overview]
Message-ID: <0e439df9-ccd4-699f-dbb3-51431d7f0fbe@mentor.com> (raw)
In-Reply-To: <f5da1587-02e7-5704-a676-1829b915c6f8@gmail.com>

Hello Dmitry

On 2020/05/17 22:26, Dmitry Osipenko wrote:
> 17.05.2020 16:08, Dmitry Osipenko пишет:
>> 17.05.2020 06:32, Wang, Jiada пишет:
>>> Hello Dmitry
>>>
>>> On 2020/05/14 13:53, Dmitry Osipenko wrote:
>>>> 13.05.2020 08:07, Wang, Jiada пишет:
>>>>> Hello Dmitry
>>>>>
>>>>> On 2020/05/12 8:13, Dmitry Osipenko wrote:
>>>>>> 11.05.2020 05:05, Wang, Jiada пишет:
>>>>>>> Hello Dmitry
>>>>>>>
>>>>>>> Thanks for your comment and test,
>>>>>>>
>>>>>>> can you let me know which platform (board) you are using for test,
>>>>>>> and DTS changes if you have added any.
>>>>>>
>>>>>> That's this device-tree [1] without any extra changes.
>>>>>>
>>>>> I am using Samsung Chromebook Pro for testing,
>>>>> but obviously some of the use cases it can't cover.
>>>>>
>>>>> I also would like to test on same device you are using,
>>>>> would you please let me know how to boot Acer Iconia Tab A500
>>>>> with custom images. Are you booting Linux or Android on it?
>>>>
>>>> I'm using Ubuntu 20.04 on it at the moment. In order to boot custom
>>>> images you'll need at least to install a custom recovery, which will
>>>> allow to flash boot.img on eMMC storage.
>>>>
>>>> Ideally, you'll need to install an unlocked bootloader that will enable
>>>> Android's fastboot, and thus, allow to easily boot kernel zImage without
>>>> messing with flashing boot images.
>>>>
>>>> Could you please tell what is the current state of yours device: does it
>>>> have a stock Android installed? is it rooted? is custom recovery
>>>> installed?
>>>>
>>> Thanks for your information
>>>
>>> By following instructions found in XDA forums,
>>> now I am able to install an unlocked bootloader,
>>> boot among primary kernel, recovery kernel or fastboot,
>>> an Android custom stock rom also has been installed
>>
>> Awesome!
>>
>>> Could you please let me know how to install local built ubuntu images
>>
>> Sure, please follow these steps:
>>
>> 1. Download rootfs from
>> http://cdimage.ubuntu.com/ubuntu-base/releases/20.04/release/ubuntu-base-20.04-base-armhf.tar.gz
>>
>> 2. Extract it wherever you want yours root to be, like ExternalSD card
>> or eMMC /data partition or even NFS directory if you'll use usbnet.
>>
>> 3. Clone this kernel https://github.com/grate-driver/linux which is a
>> recent upstream linux-next + work-in-progress patches that haven't been
>> merged into upstream yet. For example DRM bridges and Tegra Partition
>> Table patches are under review now.
>>
>> 4. Select tegra_defconfig:
>>
>> 	ARCH=arm make tegra_defconfig
>>
>> 5. Compile kernel:
>>
>> 	ARCH=arm make
>>
>> 6. Append DTB to zImage:
>>
>> 	cat arch/arm/boot/zImage
>> arch/arm/boot/dts/tegra20-acer-a500-picasso.dtb > arch/arm/boot/zImage-dtb
>>
>> 7. Turn on A500 and select 'fastboot' option in the bootloader's menu.
>>
>> 8. Boot compiled kernel:
>>
>> 	fastboot -c "root=/dev/mmcblk2p8 gpt tegraboot=sdmmc" boot
>> arch/arm/boot/zImage-dtb
>>
>> 9. Grab touchscreen/WiFi/Bluetooth firmware files from
>> https://github.com/digetx/linux-firmware
>>
>> 10. Grab ALSA UCM rule from https://github.com/digetx/alsa-ucm-conf
>>
>> 11. Enjoy!
>>
>> Please let me know you'll experience any problems, I'll be glad to help.
>>
> 
> Also, there is an Ubuntu PPA for Tegra20/30 devices with drivers from
> GRATE-driver project:
> https://launchpad.net/~grate-driver/+archive/ubuntu/ppa
> 
> Please keep in mind that there is no GL driver that work with upstream
> kernel.
> 
> I'd recommend to use KDE Plasma 5 for the desktop environment. For the
> good experience you'll need to tell Qt to use software render, the
> easiest way is to set required env variables globally:
> 
> echo -e
> "QT_QUICK_BACKEND=software\nLIBGL_ALWAYS_SOFTWARE=1\nQT_IM_MODULE=qtvirtualkeyboard"
>>> /etc/security/pam_env.conf

Thanks for detailed information to help me boot ubuntu on acer tab a500,
now I am able to boot it with ubuntu and reproduced the issue with v11 
patch-set.

I will start to investigate the root cause,
from now on, my update patch-set will be tested on both samsung 
chromebook pro and acer tab a500

Thanks for your help

Thanks,
Jiada