Am Fre, 2003-06-13 um 20.36 schrieb Damian Kołkowski:

> ACPI works with new acpid-1.0.2, but without CONFIG_X86_UP_IOAPIC :-)

Surprise, but ACPI never was the problem with this board... :)
I've tested a few more kernels. .21 fails as well as the latest -ac.

Unfortunately the -ac's also have "interesting" troubles with my 2nd
NIC in the machine which is a

00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
        Subsystem: Realtek Semiconductor Co., Ltd. RT8139
        Flags: bus master, medium devsel, latency 32, IRQ 10
        I/O ports at d800 [size=256]
        Memory at e0108000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2

It loads perfectly but has problems coping with the media. 

-- 
Servus,
       Daniel