From: john stultz <johnstul@us.ibm.com>
To: marcelo <marcelo@conectiva.com.br>
Cc: Andrew Grover <andrew.grover@intel.com>,
lkml <linux-kernel@vger.kernel.org>
Subject: [PATCH] linux-2.4.22-pre4_x440-acpi-fix_A0
Date: 09 Jul 2003 18:08:00 -0700 [thread overview]
Message-ID: <1057799280.27380.248.camel@w-jstultz2.beaverton.ibm.com> (raw)
Marcelo, Andrew, All,
Due to the new ACPI code, when booting in full ACPI mode, we do not go
through the mps tables, thus we do not execute the summit detection code
required for booting an x440.
This patch insures that when booting in full ACPI mode we check to see
if we're running on a summit based system and enable clustered apic
mode. Without this patch the x440s hang while booting in full ACPI mode.
Thanks to James Cleverdon for the original version of this patch.
Please apply,
thanks
-john
diff -Nru a/arch/i386/kernel/acpi.c b/arch/i386/kernel/acpi.c
--- a/arch/i386/kernel/acpi.c Wed Jul 9 16:39:20 2003
+++ b/arch/i386/kernel/acpi.c Wed Jul 9 16:39:20 2003
@@ -129,6 +129,8 @@
printk(KERN_INFO PREFIX "Local APIC address 0x%08x\n",
madt->lapic_address);
+ acpi_madt_oem_check(madt->header.oem_id, madt->header.oem_table_id);
+
return 0;
}
diff -Nru a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c
--- a/arch/i386/kernel/io_apic.c Wed Jul 9 16:39:20 2003
+++ b/arch/i386/kernel/io_apic.c Wed Jul 9 16:39:20 2003
@@ -1732,6 +1732,13 @@
apic_id = reg_00.ID;
}
+ /* XAPICs do not need unique IDs */
+ if (clustered_apic_mode == CLUSTERED_APIC_XAPIC){
+ printk(KERN_INFO "IOAPIC[%d]: Assigned apic_id %d\n",
+ ioapic, apic_id);
+ return apic_id;
+ }
+
/*
* Every APIC in a system must have a unique ID or we get lots of nice
* 'stuck on smp_invalidate_needed IPI wait' messages.
diff -Nru a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c
--- a/arch/i386/kernel/mpparse.c Wed Jul 9 16:39:20 2003
+++ b/arch/i386/kernel/mpparse.c Wed Jul 9 16:39:20 2003
@@ -1252,6 +1252,23 @@
io_apic_set_pci_routing(ioapic, ioapic_pin, irq);
}
+/* Hook from generic ACPI tables.c */
+void __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+ if (!strncmp(oem_id, "IBM", 3) &&
+ (!strncmp(oem_table_id, "SERVIGIL", 8) ||
+ !strncmp(oem_table_id, "EXA", 3) ||
+ !strncmp(oem_table_id, "RUTHLESS", 8))){
+ clustered_apic_mode = CLUSTERED_APIC_XAPIC;
+ apic_broadcast_id = APIC_BROADCAST_ID_XAPIC;
+ int_dest_addr_mode = APIC_DEST_PHYSICAL;
+ int_delivery_mode = dest_Fixed;
+ esr_disable = 1;
+ /*Start cyclone clock*/
+ cyclone_setup(0);
+ }
+}
+
#ifdef CONFIG_ACPI_PCI
void __init mp_parse_prt (void)
diff -Nru a/include/asm-i386/acpi.h b/include/asm-i386/acpi.h
--- a/include/asm-i386/acpi.h Wed Jul 9 16:39:20 2003
+++ b/include/asm-i386/acpi.h Wed Jul 9 16:39:20 2003
@@ -165,6 +165,9 @@
/* early initialization routine */
extern void acpi_reserve_bootmem(void);
+/* Check for special HW using OEM name lists */
+extern void acpi_madt_oem_check(char *oem_id, char *oem_table_id);
+
#endif /*CONFIG_ACPI_SLEEP*/
next reply other threads:[~2003-07-10 0:57 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-07-10 1:08 john stultz [this message]
2003-07-10 3:22 ` [PATCH] linux-2.4.22-pre4_x440-acpi-fix_A0 Marcelo Tosatti
2003-07-10 20:47 ` john stultz
2003-07-10 22:08 ` [PATCH] linux-2.4.22-pre4_x440-acpi-fix_A1 john stultz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1057799280.27380.248.camel@w-jstultz2.beaverton.ibm.com \
--to=johnstul@us.ibm.com \
--cc=andrew.grover@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=marcelo@conectiva.com.br \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).