archive mirror
 help / color / mirror / Atom feed
From: "Trever L. Adams" <>
Cc: Jeff Garzik <>,
	Linux Kernel Mailing List <>
Subject: [More Info] Re: 2.6.0test 1 fails on eth0 up (arjanv RPM's - all needed rpms installed)
Date: 15 Jul 2003 16:10:38 -0400	[thread overview]
Message-ID: <1058299838.3358.4.camel@aurora.localdomain> (raw)
In-Reply-To: <1058217601.4441.1.camel@aurora.localdomain>

Ok, I finally went into interactive boot (taking a moment from my
studies).  I made sure not to let it bring eth0 up, everything worked
fine.  I still got this USB oops.  I hope it means something more to

If I do pci=noacpi and acpi=off then I can boot.  However, I can't use
my mouse with is an MS InteliMouse Explorer 3 on a PS/2 port.  The PS/2
driver did initiate, so did gpm.  However, no mouse in console or X. 
This board is supposed to be fine with Linux acpi, or so I have read
somewhere.  Anyway, USB oops.

kernel: ehci_hcd 0000:00:02.2: PCI device 10de:0068 (nVidia Corporation)
kernel: irq 3: nobody cared!
kernel: Call Trace:
kernel:  [<c010c12a>] __report_bad_irq+0x2a/0x90
kernel:  [<c010c21c>] note_interrupt+0x6c/0xb0
kernel:  [<c010c42d>] do_IRQ+0xed/0x110
kernel:  [<c010a9f8>] common_interrupt+0x18/0x20
kernel:  [<c011f700>] do_softirq+0x40/0xa0
kernel:  [<c010c414>] do_IRQ+0xd4/0x110
kernel:  [<c010a9f8>] common_interrupt+0x18/0x20
kernel:  [<c010c84e>] setup_irq+0x6e/0xb0
kernel:  [<e087e310>] usb_hcd_irq+0x0/0x60 [usbcore]
kernel:  [<c010c4d0>] request_irq+0x80/0xd0
kernel:  [<e08813f6>] usb_hcd_pci_probe+0x1d6/0x440 [usbcore]
kernel:  [<e087e310>] usb_hcd_irq+0x0/0x60 [usbcore]
kernel:  [<c0180033>] t_start+0x43/0x50
kernel:  [<c01a92f2>] pci_device_probe_static+0x52/0x70
kernel:  [<c01a940c>] __pci_device_probe+0x3c/0x50
kernel:  [<c01a944f>] pci_device_probe+0x2f/0x50
kernel:  [<c01ea715>] bus_match+0x45/0x80
kernel:  [<c01ea82c>] driver_attach+0x5c/0x60
kernel:  [<c01eab17>] bus_add_driver+0xa7/0xc0
kernel:  [<c01eaf9f>] driver_register+0x2f/0x40
kernel:  [<c01a9700>] pci_register_driver+0x70/0xa0
kernel:  [<e0824021>] init+0x21/0x4f [ehci_hcd]
kernel:  [<c01303bb>] sys_init_module+0x10b/0x1e0
kernel:  [<c010a839>] sysenter_past_esp+0x52/0x71
kernel: handlers:
kernel: [<e087e310>] (usb_hcd_irq+0x0/0x60 [usbcore])
kernel: Disabling IRQ #3
kernel: ehci_hcd 0000:00:02.2: irq 3, pci mem e0815000
kernel: ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus
number 1
"History is nothing but a collection of fables and useless trifles,
cluttered up with a mass of unnecessary figures and proper names." --
Leo Tolstoy

  reply	other threads:[~2003-07-15 19:55 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-07-14 18:56 Trever L. Adams
2003-07-14 19:06 ` Jeff Garzik
2003-07-14 19:15   ` Arjan van de Ven
2003-07-14 21:20     ` Trever L. Adams
2003-07-15 20:10       ` Trever L. Adams [this message]
2003-07-15 21:02         ` [More Info] " Greg KH
2003-07-15 20:55           ` jds
2003-07-15 23:15           ` David Brownell
2003-07-26  0:06           ` David Brownell
2003-07-31  6:42             ` Trever L. Adams
2003-07-31 17:15               ` David Brownell
2003-07-16 18:59 ` Zwane Mwaikambo
2003-07-17  3:11   ` Trever L. Adams
     [not found]     ` <>
2003-07-17 14:46       ` Trever L. Adams

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1058299838.3358.4.camel@aurora.localdomain \ \ \ \ \
    --subject='[More Info] Re: 2.6.0test 1 fails on eth0 up (arjanv RPM'\''s - all needed rpms installed)' \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).