* 2.6.0-test1 Cannot login in X or console
@ 2003-07-19 3:07 Jonathan Bastien-Filiatrault
[not found] ` <3F195E5D.50409@maine.rr.com>
0 siblings, 1 reply; 7+ messages in thread
From: Jonathan Bastien-Filiatrault @ 2003-07-19 3:07 UTC (permalink / raw)
To: Linux Kernel
I have succesfully compiled and booted the 2.6.0-test1 kernel. After i
enter my username and password succesfuly the login window simply stays
there:
Login: user <enter>
Password: xxxx<enter>
<freezes>
Same thing with gdm. I do not have this problem with 2.4.21+swsup+preempt.
There is no error written in the system log.
Is it possible that PAM + 2.6.0-test1 results in this problem ?
The single runlevel works fine.(booted with single as kernel arg)
I am running gentoo.
Any insight appreciated.
Joe
^ permalink raw reply [flat|nested] 7+ messages in thread[parent not found: <3F195E5D.50409@maine.rr.com>]
* Re: 2.6.0-test1 Cannot login in X or console [not found] ` <3F195E5D.50409@maine.rr.com> @ 2003-07-19 17:42 ` Jonathan Bastien-Filiatrault 2003-07-19 17:45 ` Jonathan Bastien-Filiatrault 1 sibling, 0 replies; 7+ messages in thread From: Jonathan Bastien-Filiatrault @ 2003-07-19 17:42 UTC (permalink / raw) To: David B. Stevens; +Cc: Linux Kernel [-- Attachment #1: Type: text/plain, Size: 1480 bytes --] Included is my config file, btw, it is not just the console that blocks, it is the whole auth. system, which works fine with 2.4. > Hi Joe, > > How about a clue as to what your config looks like for the 2.6.0-test1 > kernel and such. The area surrounding input and console support has > changed quite a bit from 2.4. > > I'm running 2.6.0-test1-ac2, X, kdm, etc and it works just fine, well > one of these days I'll get the alsa config up to snuff. But till then > as long as I can watch my TV in a corner of the screen with sound I'm > happy. The midi stuff can wait :). > > Cheers, > Dave > > > Jonathan Bastien-Filiatrault wrote: > >> I have succesfully compiled and booted the 2.6.0-test1 kernel. After >> i enter my username and password succesfuly the login window simply >> stays there: >> >> Login: user <enter> >> Password: xxxx<enter> >> <freezes> >> >> Same thing with gdm. I do not have this problem with >> 2.4.21+swsup+preempt. >> There is no error written in the system log. >> Is it possible that PAM + 2.6.0-test1 results in this problem ? >> The single runlevel works fine.(booted with single as kernel arg) >> I am running gentoo. >> >> Any insight appreciated. >> >> Joe >> >> - >> To unsubscribe from this list: send the line "unsubscribe >> linux-kernel" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> Please read the FAQ at http://www.tux.org/lkml/ >> > > [-- Attachment #2: config --] [-- Type: text/plain, Size: 4854 bytes --] CONFIG_X86=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y CONFIG_EXPERIMENTAL=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSCTL=y CONFIG_KALLSYMS=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y CONFIG_KMOD=y CONFIG_X86_PC=y CONFIG_MK7=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_USE_3DNOW=y CONFIG_PREEMPT=y CONFIG_X86_UP_APIC=y CONFIG_X86_UP_IOAPIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_TSC=y CONFIG_X86_MCE=y CONFIG_X86_MCE_NONFATAL=y CONFIG_X86_MCE_P4THERMAL=y CONFIG_MICROCODE=y CONFIG_X86_MSR=y CONFIG_X86_CPUID=y CONFIG_NOHIGHMEM=y CONFIG_MTRR=y CONFIG_HAVE_DEC_LOCK=y CONFIG_PM=y CONFIG_SOFTWARE_SUSPEND=y CONFIG_ACPI=y CONFIG_ACPI_BOOT=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SLEEP_PROC_FS=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y CONFIG_ACPI_DEBUG=y CONFIG_ACPI_BUS=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y CONFIG_PCI=y CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_NAMES=y CONFIG_KCORE_ELF=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_MISC=y CONFIG_PARPORT=y CONFIG_PARPORT_PC=y CONFIG_PARPORT_PC_CML1=y CONFIG_PARPORT_PC_FIFO=y CONFIG_PARPORT_1284=y CONFIG_PNP=y CONFIG_PNP_NAMES=y CONFIG_ISAPNP=y CONFIG_PNPBIOS=y CONFIG_BLK_DEV_FD=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_LBD=y CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDESCSI=y CONFIG_BLK_DEV_IDEPNP=y CONFIG_BLK_DEV_IDEPCI=y CONFIG_BLK_DEV_GENERIC=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_IDEDMA_PCI_AUTO=y CONFIG_BLK_DEV_IDEDMA=y CONFIG_BLK_DEV_ADMA=y CONFIG_BLK_DEV_VIA82CXXX=y CONFIG_IDEDMA_AUTO=y CONFIG_BLK_DEV_IDE_MODES=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_REPORT_LUNS=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_AIC7XXX=y CONFIG_AIC7XXX_REG_PRETTY_PRINT=y CONFIG_SCSI_QLOGIC_1280=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_NETFILTER=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_NAT_LOCAL=y CONFIG_IPV6_SCTP__=y CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_NET_PCI=y CONFIG_E100=y CONFIG_8139TOO=y # Token Ring devices (depends on LLC=y) CONFIG_INPUT=y CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_JOYDEV=y CONFIG_INPUT_EVDEV=y CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_INPUT_JOYSTICK=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_CORE=y CONFIG_UNIX98_PTYS=y CONFIG_HW_RANDOM=y CONFIG_NVRAM=y CONFIG_RTC=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_JBD=y CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y CONFIG_FS_POSIX_ACL=y CONFIG_QUOTA=y CONFIG_QFMT_V1=y CONFIG_QFMT_V2=y CONFIG_QUOTACTL=y CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_UDF_FS=y CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_NTFS_FS=y CONFIG_PROC_FS=y CONFIG_DEVFS_FS=y CONFIG_DEVFS_MOUNT=y CONFIG_DEVPTS_FS=y CONFIG_DEVPTS_FS_XATTR=y CONFIG_DEVPTS_FS_SECURITY=y CONFIG_TMPFS=y CONFIG_RAMFS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_NFSD=y CONFIG_NFSD_V3=y CONFIG_NFSD_V4=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_SMB_FS=y CONFIG_MSDOS_PARTITION=y CONFIG_SMB_NLS=y CONFIG_NLS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_9=y CONFIG_NLS_ISO8859_15=y CONFIG_NLS_UTF8=y CONFIG_FB=y CONFIG_VGA_CONSOLE=y CONFIG_DUMMY_CONSOLE=y CONFIG_LOGO=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=y CONFIG_SND_OSSEMUL=y CONFIG_SND_SEQUENCER_OSS=y CONFIG_USB=y CONFIG_USB_DEVICEFS=y CONFIG_USB_BANDWIDTH=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_UHCI_HCD=y CONFIG_USB_AUDIO=y CONFIG_USB_MIDI=y CONFIG_USB_PRINTER=y CONFIG_USB_STORAGE=y CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y CONFIG_USB_HIDDEV=y CONFIG_USB_SCANNER=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_X86_EXTRA_IRQS=y CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y CONFIG_CRYPTO=y CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_BLOWFISH=y CONFIG_CRYPTO_TWOFISH=y CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_DEFLATE=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_X86_BIOS_REBOOT=y ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 2.6.0-test1 Cannot login in X or console [not found] ` <3F195E5D.50409@maine.rr.com> 2003-07-19 17:42 ` Jonathan Bastien-Filiatrault @ 2003-07-19 17:45 ` Jonathan Bastien-Filiatrault [not found] ` <3F19B65A.6010606@maine.rr.com> 1 sibling, 1 reply; 7+ messages in thread From: Jonathan Bastien-Filiatrault @ 2003-07-19 17:45 UTC (permalink / raw) To: David B. Stevens; +Cc: Linux Kernel [-- Attachment #1: Type: text/plain, Size: 1481 bytes --] Included is my config file, btw, it is not just the console that blocks, it is the whole auth. system, which works fine with 2.4. > Hi Joe, > > How about a clue as to what your config looks like for the 2.6.0-test1 > kernel and such. The area surrounding input and console support has > changed quite a bit from 2.4. > > I'm running 2.6.0-test1-ac2, X, kdm, etc and it works just fine, well > one of these days I'll get the alsa config up to snuff. But till then > as long as I can watch my TV in a corner of the screen with sound I'm > happy. The midi stuff can wait :). > > Cheers, > Dave > > > Jonathan Bastien-Filiatrault wrote: > >> I have succesfully compiled and booted the 2.6.0-test1 kernel. After >> i enter my username and password succesfuly the login window simply >> stays there: >> >> Login: user <enter> >> Password: xxxx<enter> >> <freezes> >> >> Same thing with gdm. I do not have this problem with >> 2.4.21+swsup+preempt. >> There is no error written in the system log. >> Is it possible that PAM + 2.6.0-test1 results in this problem ? >> The single runlevel works fine.(booted with single as kernel arg) >> I am running gentoo. >> >> Any insight appreciated. >> >> Joe >> >> - >> To unsubscribe from this list: send the line "unsubscribe >> linux-kernel" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> Please read the FAQ at http://www.tux.org/lkml/ >> > > [-- Attachment #2: config --] [-- Type: text/plain, Size: 4855 bytes --] CONFIG_X86=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y CONFIG_EXPERIMENTAL=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSCTL=y CONFIG_KALLSYMS=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y CONFIG_KMOD=y CONFIG_X86_PC=y CONFIG_MK7=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_USE_3DNOW=y CONFIG_PREEMPT=y CONFIG_X86_UP_APIC=y CONFIG_X86_UP_IOAPIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_TSC=y CONFIG_X86_MCE=y CONFIG_X86_MCE_NONFATAL=y CONFIG_X86_MCE_P4THERMAL=y CONFIG_MICROCODE=y CONFIG_X86_MSR=y CONFIG_X86_CPUID=y CONFIG_NOHIGHMEM=y CONFIG_MTRR=y CONFIG_HAVE_DEC_LOCK=y CONFIG_PM=y CONFIG_SOFTWARE_SUSPEND=y CONFIG_ACPI=y CONFIG_ACPI_BOOT=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SLEEP_PROC_FS=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y CONFIG_ACPI_DEBUG=y CONFIG_ACPI_BUS=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y CONFIG_PCI=y CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_NAMES=y CONFIG_KCORE_ELF=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_MISC=y CONFIG_PARPORT=y CONFIG_PARPORT_PC=y CONFIG_PARPORT_PC_CML1=y CONFIG_PARPORT_PC_FIFO=y CONFIG_PARPORT_1284=y CONFIG_PNP=y CONFIG_PNP_NAMES=y CONFIG_ISAPNP=y CONFIG_PNPBIOS=y CONFIG_BLK_DEV_FD=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_LBD=y CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDESCSI=y CONFIG_BLK_DEV_IDEPNP=y CONFIG_BLK_DEV_IDEPCI=y CONFIG_BLK_DEV_GENERIC=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_IDEDMA_PCI_AUTO=y CONFIG_BLK_DEV_IDEDMA=y CONFIG_BLK_DEV_ADMA=y CONFIG_BLK_DEV_VIA82CXXX=y CONFIG_IDEDMA_AUTO=y CONFIG_BLK_DEV_IDE_MODES=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_REPORT_LUNS=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_AIC7XXX=y CONFIG_AIC7XXX_REG_PRETTY_PRINT=y CONFIG_SCSI_QLOGIC_1280=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_NETFILTER=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_NAT_LOCAL=y CONFIG_IPV6_SCTP__=y CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_NET_PCI=y CONFIG_E100=y CONFIG_8139TOO=y # Token Ring devices (depends on LLC=y) CONFIG_INPUT=y CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_JOYDEV=y CONFIG_INPUT_EVDEV=y CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_INPUT_JOYSTICK=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_CORE=y CONFIG_UNIX98_PTYS=y CONFIG_HW_RANDOM=y CONFIG_NVRAM=y CONFIG_RTC=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_JBD=y CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y CONFIG_FS_POSIX_ACL=y CONFIG_QUOTA=y CONFIG_QFMT_V1=y CONFIG_QFMT_V2=y CONFIG_QUOTACTL=y CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_UDF_FS=y CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_NTFS_FS=y CONFIG_PROC_FS=y CONFIG_DEVFS_FS=y CONFIG_DEVFS_MOUNT=y CONFIG_DEVPTS_FS=y CONFIG_DEVPTS_FS_XATTR=y CONFIG_DEVPTS_FS_SECURITY=y CONFIG_TMPFS=y CONFIG_RAMFS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_NFSD=y CONFIG_NFSD_V3=y CONFIG_NFSD_V4=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_SMB_FS=y CONFIG_MSDOS_PARTITION=y CONFIG_SMB_NLS=y CONFIG_NLS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_9=y CONFIG_NLS_ISO8859_15=y CONFIG_NLS_UTF8=y CONFIG_FB=y CONFIG_VGA_CONSOLE=y CONFIG_DUMMY_CONSOLE=y CONFIG_LOGO=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=y CONFIG_SND_OSSEMUL=y CONFIG_SND_SEQUENCER_OSS=y CONFIG_USB=y CONFIG_USB_DEVICEFS=y CONFIG_USB_BANDWIDTH=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_UHCI_HCD=y CONFIG_USB_AUDIO=y CONFIG_USB_MIDI=y CONFIG_USB_PRINTER=y CONFIG_USB_STORAGE=y CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y CONFIG_USB_HIDDEV=y CONFIG_USB_SCANNER=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_X86_EXTRA_IRQS=y CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y CONFIG_CRYPTO=y CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_BLOWFISH=y CONFIG_CRYPTO_TWOFISH=y CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_DEFLATE=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_X86_BIOS_REBOOT=y ^ permalink raw reply [flat|nested] 7+ messages in thread
[parent not found: <3F19B65A.6010606@maine.rr.com>]
* Re: 2.6.0-test1 Cannot login in X or console [not found] ` <3F19B65A.6010606@maine.rr.com> @ 2003-07-20 5:10 ` Jonathan Bastien-Filiatrault [not found] ` <3F1A5123.2080101@portrix.net> 0 siblings, 1 reply; 7+ messages in thread From: Jonathan Bastien-Filiatrault @ 2003-07-20 5:10 UTC (permalink / raw) To: David B. Stevens; +Cc: Linux Kernel David B. Stevens wrote: > Hi, > > I see you have the debug otions turned on so how about posting a > Alt+SysRq+T at the time of the lockup if possible. Show state shows nothing... I tried to do tErm and i got a working login. I have no Idea why this is happening. This is a really big showstopper for me > > Cheers, > Dave In hope of getting 2.6 to work, Joe ^ permalink raw reply [flat|nested] 7+ messages in thread
[parent not found: <3F1A5123.2080101@portrix.net>]
* Re: 2.6.0-test1 Cannot login in X or console [not found] ` <3F1A5123.2080101@portrix.net> @ 2003-07-20 9:40 ` Jonathan Bastien-Filiatrault 2003-07-21 12:07 ` Martin Schlemmer 0 siblings, 1 reply; 7+ messages in thread From: Jonathan Bastien-Filiatrault @ 2003-07-20 9:40 UTC (permalink / raw) To: Jan Dittmer; +Cc: Linux Kernel Jan Dittmer wrote: > just mount devpts to /dev/pts, iff you have devfs enabled. Already did that, i cannot even login on the 80x25 console. > > jan > This bug is preventing me from migrating !!! Any ideas on the cause of this problem ? Joe ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 2.6.0-test1 Cannot login in X or console 2003-07-20 9:40 ` Jonathan Bastien-Filiatrault @ 2003-07-21 12:07 ` Martin Schlemmer 2003-07-22 12:48 ` Jonathan Bastien-Filiatrault 0 siblings, 1 reply; 7+ messages in thread From: Martin Schlemmer @ 2003-07-21 12:07 UTC (permalink / raw) To: Jonathan Bastien-Filiatrault; +Cc: Jan Dittmer, Linux Kernel On Sun, 2003-07-20 at 11:40, Jonathan Bastien-Filiatrault wrote: > Jan Dittmer wrote: > > > just mount devpts to /dev/pts, iff you have devfs enabled. > > Already did that, i cannot even login on the 80x25 console. > > > > > jan > > > This bug is preventing me from migrating !!! > Any ideas on the cause of this problem ? > Maybe try to boot 2.4 again, and see if you can get the wiser by looking at the logs. Regards, -- Martin Schlemmer ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 2.6.0-test1 Cannot login in X or console 2003-07-21 12:07 ` Martin Schlemmer @ 2003-07-22 12:48 ` Jonathan Bastien-Filiatrault 0 siblings, 0 replies; 7+ messages in thread From: Jonathan Bastien-Filiatrault @ 2003-07-22 12:48 UTC (permalink / raw) To: Martin Schlemmer; +Cc: Linux Kernel Martin Schlemmer wrote: >On Sun, 2003-07-20 at 11:40, Jonathan Bastien-Filiatrault wrote: > > >>Jan Dittmer wrote: >> >> >> >>>just mount devpts to /dev/pts, iff you have devfs enabled. >>> >>> >>Already did that, i cannot even login on the 80x25 console. >> >> >> >>>jan >>> >>> >>> >>This bug is preventing me from migrating !!! >>Any ideas on the cause of this problem ? >> >> >> > >Maybe try to boot 2.4 again, and see if you can get the >wiser by looking at the logs. > > Nothing in the logs...the dreaful ilent error !!! > >Regards, > > > ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2003-07-22 12:31 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-07-19 3:07 2.6.0-test1 Cannot login in X or console Jonathan Bastien-Filiatrault
[not found] ` <3F195E5D.50409@maine.rr.com>
2003-07-19 17:42 ` Jonathan Bastien-Filiatrault
2003-07-19 17:45 ` Jonathan Bastien-Filiatrault
[not found] ` <3F19B65A.6010606@maine.rr.com>
2003-07-20 5:10 ` Jonathan Bastien-Filiatrault
[not found] ` <3F1A5123.2080101@portrix.net>
2003-07-20 9:40 ` Jonathan Bastien-Filiatrault
2003-07-21 12:07 ` Martin Schlemmer
2003-07-22 12:48 ` Jonathan Bastien-Filiatrault
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).