archive mirror
 help / color / mirror / Atom feed
* IDE-Controller problems (2.6.0-test2-mm1/2)
@ 2003-08-01  6:07 Benjamin Weber
  0 siblings, 0 replies; only message in thread
From: Benjamin Weber @ 2003-08-01  6:07 UTC (permalink / raw)
  To: linux-kernel

Hi all

Since test2-mm1 the kernel will not properly detect or enable my via
IDE-Controller. This is what I get:

VP_IDE: IDE controller at PCI slot 0000:00:11.1
VP_IDE: (ide_setup_pci_device:) Could not enable device.

2.6.0-test1-mm1 works though:

VP_IDE: IDE controller at PCI slot 0000:00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
    ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:DMA, hdd:DMA

My box is a UP AMD 2700+. Kernel has IO-APIC enabled, but I am passing
the noapic kernel option at boot (cause else my USB is screwed up).

Any ideas?


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2003-08-01  6:05 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-08-01  6:07 IDE-Controller problems (2.6.0-test2-mm1/2) Benjamin Weber

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).