From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S272691AbTHRTYt (ORCPT ); Mon, 18 Aug 2003 15:24:49 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S272278AbTHRTYs (ORCPT ); Mon, 18 Aug 2003 15:24:48 -0400 Received: from dodge.jordet.nu ([217.13.8.142]:58534 "EHLO dodge.hybel") by vger.kernel.org with ESMTP id S272691AbTHRTXP (ORCPT ); Mon, 18 Aug 2003 15:23:15 -0400 Subject: RE: 2.6.0-test3 latest bk hangs when enabling IO-APIC From: Stian Jordet To: "Brown, Len" Cc: linux-kernel@vger.kernel.org In-Reply-To: References: Content-Type: text/plain Message-Id: <1061234596.594.3.camel@chevrolet.hybel> Mime-Version: 1.0 X-Mailer: Ximian Evolution 1.4.4 Date: Mon, 18 Aug 2003 21:23:16 +0200 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org man, 18.08.2003 kl. 19.53 skrev Brown, Len: > Try booting with pci=noacpi, and if that doesn't work acpi=off > If either of those work, then file in bugzilla with component=ACPI and > assign it to len.brown@intel.com It works when booting with noapic, but not with acpi=off nor pci=noapic. Does that mean I can't blame you for it? Best regards, Stian > > --Original Message-- > > From: Stian Jordet [mailto:liste@jordet.nu] > > Sent: Monday, August 18, 2003 9:10 AM > > To: linux-kernel@vger.kernel.org > > Subject: 2.6.0-test3 latest bk hangs when enabling IO-APIC > > > > > > Hello, > > > > latest bk of 2.6.0-test3 hangs with these three lines: > > > > ENABLING IO-APIC IRQs > > Setting 2 in the phys_id_present_map > > ...changing IO-APIC physical APIC ID to 2 ... ok. > > > > And there it stays forever. 2.6.0-test3 worked like a charm. This is a > > Asus CUV265-DLS motherboard. Dual P3. > > > > Should I file a bugreport at bugzilla? > > > > Best regards, > > Stian