Hi! I've got the following messages with 2.6.0-test9-mm1 (with exec-shield). Vanilla 2.6.0-test9 seems ok. sunshine:/home/trey# lspci 00:00.0 Host bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset Host Bridge (rev 02) 00:01.0 PCI bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset AGP Bridge (rev 02) 00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 02) 00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 02) 00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 02) 00:1d.7 USB Controller: Intel Corp. 82801DB USB EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 82) 00:1f.0 ISA bridge: Intel Corp. 82801DB ISA Bridge (LPC) (rev 02) 00:1f.1 IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 02) 00:1f.3 SMBus: Intel Corp. 82801DB SMBus (rev 02) 00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2) 02:02.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 05) 02:03.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:03.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 02:04.0 VGA compatible unclassified device: Creative Labs SB Live! EMU10k1 (rev 08) 02:04.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 08) 02:06.0 RAID bus controller: CMD Technology Inc Silicon Image SiI 3112 SATARaid Controller (rev 01) 02:08.0 Ethernet controller: Intel Corp. 82801BD PRO/100 VE (LOM) Ethernet Controller (rev 82) (HyperThreading) sunshine:/home/trey# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Pentium(R) 4 CPU 3.06GHz stepping : 7 cpu MHz : 3189.847 cache size : 512 KB physical id : 0 siblings : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid bogomips : 6307.84 processor : 1 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Pentium(R) 4 CPU 3.06GHz stepping : 7 cpu MHz : 3189.847 cache size : 512 KB physical id : 0 siblings : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid bogomips : 6373.37 sunshine:/home/trey# dmesg 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 3188.0839 MHz. ..... host bus clock speed is 138.0645 MHz. checking TSC synchronization across 2 CPUs: passed. Starting migration thread for cpu 0 Bringing up 1 CPU 1 IS NOW UP! Starting migration thread for cpu 1 CPUS done 2 zapping low mappings. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20031002 IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9 Mode:1 Active:0) ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: Power Resource [URP1] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00f49d0 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x500a, dseg 0xf0000 PnPBIOS: Unknown tag '0x82', length '12'. PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub IOAPIC[0]: Set PCI routing entry (2-16 -> 0xa9 -> IRQ 16 Mode:1 Active:1) 00:00:1d[A] -> 2-16 -> IRQ 16 IOAPIC[0]: Set PCI routing entry (2-19 -> 0xb1 -> IRQ 19 Mode:1 Active:1) 00:00:1d[B] -> 2-19 -> IRQ 19 IOAPIC[0]: Set PCI routing entry (2-18 -> 0xb9 -> IRQ 18 Mode:1 Active:1) 00:00:1d[C] -> 2-18 -> IRQ 18 IOAPIC[0]: Set PCI routing entry (2-23 -> 0xc1 -> IRQ 23 Mode:1 Active:1) 00:00:1d[D] -> 2-23 -> IRQ 23 Pin 2-18 already programmed IOAPIC[0]: Set PCI routing entry (2-17 -> 0xc9 -> IRQ 17 Mode:1 Active:1) 00:00:1f[B] -> 2-17 -> IRQ 17 Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-16 already programmed IOAPIC[0]: Set PCI routing entry (2-20 -> 0xd1 -> IRQ 20 Mode:1 Active:1) 00:02:08[A] -> 2-20 -> IRQ 20 IOAPIC[0]: Set PCI routing entry (2-21 -> 0xd9 -> IRQ 21 Mode:1 Active:1) 00:02:00[A] -> 2-21 -> IRQ 21 IOAPIC[0]: Set PCI routing entry (2-22 -> 0xe1 -> IRQ 22 Mode:1 Active:1) 00:02:00[B] -> 2-22 -> IRQ 22 Pin 2-23 already programmed Pin 2-20 already programmed Pin 2-22 already programmed Pin 2-21 already programmed Pin 2-20 already programmed Pin 2-23 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-17 already programmed Pin 2-16 already programmed Pin 2-19 already programmed Pin 2-18 already programmed Pin 2-21 already programmed Pin 2-22 already programmed Pin 2-17 already programmed Pin 2-23 already programmed Pin 2-16 already programmed Pin 2-20 already programmed Pin 2-21 already programmed Pin 2-17 already programmed PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' PCI: Cannot allocate resource region 0 of device 0000:02:04.0 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found vesafb: framebuffer at 0xd0000000, mapped to 0xe080c000, size 16384k vesafb: mode is 1024x768x16, linelength=2048, pages=0 vesafb: protected mode interface info at c000:c220 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 fb0: VESA VGA frame buffer device Machine check exception polling timer started. cpufreq: P4/Xeon(TM) CPU On-Demand Clock Modulation available speedstep-smi: signature:0x00008680, command:0x0000e712, event:0x00010000, perf_level:0x47534943. Starting balanced_irq ikconfig 0.7 with /proc/config* Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.4 [Flags: R/O]. Initializing Cryptographic API ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Processor [CPU1] (supports C1, 8 throttling states) ACPI: Processor [CPU2] (supports C1, 8 throttling states) Console: switching to colour frame buffer device 128x48 pty: 256 Unix98 ptys configured Real Time Clock Driver v1.12 hw_random hardware driver 1.0.0 loaded Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 845G Chipset. agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 256M @ 0xe0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Intel(R) PRO/100 Network Driver - version 2.3.30-k1 Copyright (c) 2003 Intel Corporation e100: selftest OK. e100: eth0: Intel(R) PRO/100 Network Connection e100: selftest OK. e100: eth1: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ICH4: chipset revision 2 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA hda: IC35L080AVVA07-0, ATA DISK drive hdb: WDC WD800BB-22CAA0, ATA DISK drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: Maxtor 6Y040L0, ATA DISK drive hdd: SONY CD-RW CRX175A1, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 160836480 sectors (82348 MB) w/1863KiB Cache, CHS=65535/16/63, UDMA(100) hda: hda1 hda2 hda3 hda4 hdb: max request size: 128KiB hdb: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hdb: hdb1 hdc: max request size: 128KiB hdc: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hdc: hdc1 hdc2 Console: switching to colour frame buffer device 128x48 mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Translated Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) NET: Registered protocol family 1 NET: Registered protocol family 17 found reiserfs format "3.6" with standard journal Reiserfs journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (hda4) for (hda4) Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 348k freed Adding 128512k swap on /dev/hda2. Priority:-1 extents:1 Intel 810 + AC97 Audio, version 0.24, 22:34:41 Nov 2 2003 PCI: Setting latency timer of device 0000:00:1f.5 to 64 i810: Intel ICH4 found at IO 0xe080 and 0xe400, MEM 0xfebff800 and 0xfebff400, IRQ 17 i810: Intel ICH4 mmio at 0xe191d800 and 0xe191f400 i810_audio: Primary codec has ID 2 i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 i810_audio: Connection 0 with codec id 2 ac97_codec: AC97 Audio codec, id: ADS112 (Unknown) i810_audio: AC'97 codec 2 supports AMAP, total channels = 6 i810_audio: setting clocking to 48546 nvidia: module license 'NVIDIA' taints kernel. 1: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4496 Wed Jul 16 19:03:09 PDT 2003 ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (4090 buckets, 32720 max) - 304 bytes per conntrack drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver SCSI subsystem initialized Initializing USB Mass Storage driver... drivers/usb/core/usb.c: registered new driver usb-storage USB Mass Storage support registered. CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 PPP BSD Compression module registered PPP Deflate Compression module registered Linux video capture interface: v1.00 bttv: driver version 0.9.12 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 0000:02:03.0, irq: 19, latency: 32, mmio: 0xdc2fd000 bttv0: detected: Pinnacle PCTV [bswap] [card=39], PCI subsystem ID is bd11:1200 bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected] bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: miro: id=16 tuner=1 radio=fmtuner stereo=no bttv0: using tuner=1 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z tuner: chip found @ 0xc2 tuner: type set to 1 (Philips PAL_I (FI1246 and compatibles)) registering 1-0061 bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 bttv0: PLL: 28636363 => 35468950 .. ok scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: SONY Model: CD-RW CRX175A1 Rev: 5YS3 Type: CD-ROM ANSI SCSI revision: 02 sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 found reiserfs format "3.6" with standard journal Reiserfs journal params: device hdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (hdb1) for (hdb1) Using r5 hash to sort names ehci_hcd 0000:00:1d.7: EHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 23, pci mem e19f4c00 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: enabled 64bit PCI DMA PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-13 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 uhci_hcd 0000:00:1d.0: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 16, io base 0000e800 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 19, io base 0000e880 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 18, io base 0000ec00 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected hub 3-0:1.0: new USB device on port 1, assigned address 2 input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb-0000:00:1d.1-1 hub 3-0:1.0: new USB device on port 2, assigned address 3 scsi1 : SCSI emulation for USB Mass Storage devices Vendor: TwinMOS Model: MOBILE DISK Rev: 1.11 Type: Direct-Access ANSI SCSI revision: 02 WARNING: USB Mass Storage data integrity not assured USB Mass Storage device found at 3 NET: Registered protocol family 10 Disabled Privacy Extensions on device c03901a0(lo) IPv6 over IPv4 tunneling driver e100: eth0 NIC Link is Up 100 Mbps Full duplex eth1: no IPv6 routers present eth0: no IPv6 routers present agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode rar: numerical sysctl 1 2 is obsolete. rar: numerical sysctl 1 2 is obsolete. rar: numerical sysctl 1 2 is obsolete. rar: numerical sysctl 1 2 is obsolete. rar: numerical sysctl 1 2 is obsolete. rar: numerical sysctl 1 2 is obsolete. rar: numerical sysctl 1 2 is obsolete. rar: numerical sysctl 1 2 is obsolete. rar: numerical sysctl 1 2 is obsolete. rar: numerical sysctl 1 2 is obsolete. rar: numerical sysctl 1 2 is obsolete. rar: numerical sysctl 1 2 is obsolete. rar: numerical sysctl 1 2 is obsolete. rar: numerical sysctl 1 2 is obsolete. rar: numerical sysctl 1 2 is obsolete. rar: numerical sysctl 1 2 is obsolete. rar: numerical sysctl 1 2 is obsolete. rar: numerical sysctl 1 2 is obsolete. rar: numerical sysctl 1 2 is obsolete. rar: numerical sysctl 1 2 is obsolete. ISO 9660 Extensions: Microsoft Joliet Level 3 ISOFS: changing to secondary root e100: eth1 NIC Link is Up 100 Mbps Full duplex e100: eth1 NIC Link is Down e100: eth1 NIC Link is Up 100 Mbps Full duplex MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0. Bank 0: cc00000120040189 MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0. Bank 1: c000000000000145 MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0. Bank 0: cc00000320040189 MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0. Bank 1: c000000000000145 MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0. Bank 0: 8c00030420040179 MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0. Bank 0: cc00000620040189 MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0. Bank 1: c000000000000145 MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0. Bank 0: cc00000820040189 MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0. Bank 1: c000000000000135 MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0. Bank 0: cc00000a20040189 MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0. Bank 1: c000000000000145 MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0. Bank 0: cc00000c20040189 MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0. Bank 1: c000000000000135 MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0. Bank 0: cc00000e20040189 MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0. Bank 1: c000000000000135 .config attached -- Windows not found (C)heers, (P)arty or (D)ance? ----------------------------------- Micskó Gábor Compaq Accredited Platform Specialist, System Engineer (APS, ASE) Szintézis Computer Rendszerház Rt. H-9021 Győr, Tihanyi Árpád út.2. Tel: +36 96 502-216 Fax: +36 96 318-658 E-mail: gmicsko@szintezis.hu Web: http://www.hup.hu/