From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S262072AbTK3Ipy (ORCPT ); Sun, 30 Nov 2003 03:45:54 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S262280AbTK3Ipy (ORCPT ); Sun, 30 Nov 2003 03:45:54 -0500 Received: from fmr03.intel.com ([143.183.121.5]:29909 "EHLO hermes.sc.intel.com") by vger.kernel.org with ESMTP id S262072AbTK3Ipx (ORCPT ); Sun, 30 Nov 2003 03:45:53 -0500 Subject: Re: Problem Report 2.4.23 ACPI and ASUS TRL-DLS From: Len Brown To: Stephan von Krawczynski Cc: linux-kernel In-Reply-To: References: Content-Type: text/plain Organization: Message-Id: <1070181948.2663.6.camel@dhcppc4> Mime-Version: 1.0 X-Mailer: Ximian Evolution 1.2.3 Date: 30 Nov 2003 03:45:48 -0500 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On Sat, 2003-11-29 at 12:10, Stephan von Krawczynski wrote: > Hello, > > I just found out that enabling ACPI (kernel 2.4.23) on an ASUS TRL-DLS > board > leads to a failing boot, caused by not configuring the onboard scsi > aic > interfaces. In fact they are simply gone from the pci list (no > kidding). > Disabling ACPI leads to a perfectly working box with: Did earlier 2.4 or 2.6 kernels with ACPI configured work properly on this box? Does the failing kernel do any better if you tell it to boot with "pci=noacpi" or "noapic"? thanks, -Len