* Kernel panic... [not found] <S263478AbTLEJ0s/20031205092648Z+878@vger.kernel.org> @ 2003-12-05 9:34 ` neel vanan 2003-12-05 14:19 ` William Lee Irwin III 0 siblings, 1 reply; 14+ messages in thread From: neel vanan @ 2003-12-05 9:34 UTC (permalink / raw) To: linux-kernel Hi, currently i am compiling kernel 2.6.0-test11, After making kernel image and installing new module when i boot with new kernel image i am getting this error: Red Hat nash version 3.4.42 starting Loading sd_mod.ko module Loading aic79xx.ko module scsi0: Adaptec AIC79xx PCI-X SCSI HBA DRIVER, Rev 1.3.9 ..................................... scsi0:A:0:0: Tagged Queing enabled, Depth 32 scsi device sda: drive cache: write back /dev/scsi/host0/bus0/target0/lun0: unknown partition table Attached scsi disk sda at scsi0, channel0, id0, lun0 mounting /proc file system creating block devices creating Root devices Mounting root filesystem mount : erro 6 mounting ext3 pivotroot : pivot_root (/sysroot, /sysroot/initrd) failed:2 umount /initrd/proc failed :2 Mounting devfs on /dev freeing unused kernel memory : 464k freed Kernel panic: no init found. Try passing init= option to kernel After then blinking cursor. #Entries in grub.conf is: title Red Hat Linux (2.6.0) root (hd0,0) kernel /vmlinux2.6.0 ro root=/dev/sda3 initrd /initrd-2.6.0.img # also i had tried append="hdc=ide-scsi root=LABEL=/" and append="hdc=ide-scsi root=/dev/sda3" <content of /etc/fstab> LABEL=/ / ext3 defaults 1 1 LABEL=/boot /boot ext3 defaults 1 2 none /dev/pts devpts gid=5,mode=620 0 0 none /proc proc defaults 0 0 none /dev/shm tmpfs defaults 0 0 /dev/sda2 swap swap defaults 0 0 /dev/cdrom /mnt/cdrom udf,iso9660 noauto,owner,kudzu,ro 0 0 /dev/fd0 /mnt/floppy auto noauto,owner,kudzu 0 0 Please let me know where i am wrong. Thanks. Neel __________________________________ Do you Yahoo!? Free Pop-Up Blocker - Get it now http://companion.yahoo.com/ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Kernel panic... 2003-12-05 9:34 ` Kernel panic neel vanan @ 2003-12-05 14:19 ` William Lee Irwin III 2003-12-06 5:47 ` William Lee Irwin III 0 siblings, 1 reply; 14+ messages in thread From: William Lee Irwin III @ 2003-12-05 14:19 UTC (permalink / raw) To: neel vanan; +Cc: linux-kernel On Fri, Dec 05, 2003 at 01:34:35AM -0800, neel vanan wrote: > Mounting root filesystem > mount : erro 6 mounting ext3 > pivotroot : pivot_root (/sysroot, /sysroot/initrd) > failed:2 > umount /initrd/proc failed :2 > Mounting devfs on /dev > freeing unused kernel memory : 464k freed > Kernel panic: no init found. Try passing init= option > to kernel > After then blinking cursor. Could you post your .config? -- wli ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Kernel panic... 2003-12-05 14:19 ` William Lee Irwin III @ 2003-12-06 5:47 ` William Lee Irwin III 2003-12-13 11:57 ` acpi related error neel vanan 2004-01-05 11:56 ` Kernel panic.. in 3.0 Enterprise Linux neel vanan 0 siblings, 2 replies; 14+ messages in thread From: William Lee Irwin III @ 2003-12-06 5:47 UTC (permalink / raw) To: neel vanan, linux-kernel On Fri, Dec 05, 2003 at 01:34:35AM -0800, neel vanan wrote: >> Mounting root filesystem >> mount : erro 6 mounting ext3 >> pivotroot : pivot_root (/sysroot, /sysroot/initrd) >> failed:2 >> umount /initrd/proc failed :2 >> Mounting devfs on /dev >> freeing unused kernel memory : 464k freed >> Kernel panic: no init found. Try passing init= option >> to kernel >> After then blinking cursor. On Fri, Dec 05, 2003 at 06:19:28AM -0800, William Lee Irwin III wrote: > Could you post your .config? Okay, the first thing to try is removing devfs from the equation if possible. Your mount is getting back -ENXIO, suggesting whatever device you're trying to mount doesn't exist according to the kernel. devfs does device management internally to the kernel, so it's a likely culprit. It would also be helpful to find the command-line arguments issued to mount(8) when it's failing, as well as more information about the contents of your initrd. Can you boot without an initrd? -- wli ^ permalink raw reply [flat|nested] 14+ messages in thread
* acpi related error..... 2003-12-06 5:47 ` William Lee Irwin III @ 2003-12-13 11:57 ` neel vanan 2003-12-13 12:03 ` William Lee Irwin III 2004-01-05 11:56 ` Kernel panic.. in 3.0 Enterprise Linux neel vanan 1 sibling, 1 reply; 14+ messages in thread From: neel vanan @ 2003-12-13 11:57 UTC (permalink / raw) To: William Lee Irwin III, linux-kernel Hi list, Currently i am working on RedHat9.0 kernel 2.4.20-8, i am compiling kernel 2.6.0-test11 with NUMA and SMP enabled. I had selected summit though i am having non-summit box. When i am trying to make bzImage in the last i get this message: drivers/built-in.o(.init.text+0x30cf): In function `acpi_parse_slit': : undefined reference to `acpi_numa_slit_init' drivers/built-in.o(.init.text+0x30f0): In function `acpi_parse_processor_affinity': : undefined reference to `acpi_numa_processor_affinity_init' drivers/built-in.o(.init.text+0x3110): In function `acpi_parse_memory_affinity': : undefined reference to `acpi_numa_memory_affinity_init' drivers/built-in.o(.init.text+0x3199): In function `acpi_numa_init': : undefined reference to `acpi_numa_arch_fixup' make: *** [.tmp_vmlinux1] Error 1 How can i compile this without commenting these lines. Thanks. __________________________________ Do you Yahoo!? New Yahoo! Photos - easier uploading and sharing. http://photos.yahoo.com/ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: acpi related error..... 2003-12-13 11:57 ` acpi related error neel vanan @ 2003-12-13 12:03 ` William Lee Irwin III 0 siblings, 0 replies; 14+ messages in thread From: William Lee Irwin III @ 2003-12-13 12:03 UTC (permalink / raw) To: neel vanan; +Cc: linux-kernel On Sat, Dec 13, 2003 at 03:57:33AM -0800, neel vanan wrote: > Currently i am working on RedHat9.0 kernel 2.4.20-8, i > am compiling kernel 2.6.0-test11 with NUMA and SMP > enabled. I had selected summit though i am having > non-summit box. When i am trying to make bzImage in > the last i get this message: > drivers/built-in.o(.init.text+0x30cf): In function > `acpi_parse_slit': > : undefined reference to `acpi_numa_slit_init' > drivers/built-in.o(.init.text+0x30f0): In function > `acpi_parse_processor_affinity': > : undefined reference to > `acpi_numa_processor_affinity_init' You are likely enabling CONFIG_NUMA on a PC subarch or trying to build CONFIG_X86_SUMMIT without CONFIG_ACPI; this is ridiculous as PC means non-NUMA and Summit means ACPI. I'm not sure how you selected this combination. Best to turn off CONFIG_NUMA unless you have an x440, x445, or NUMA-Q. -- wli ^ permalink raw reply [flat|nested] 14+ messages in thread
* Kernel panic.. in 3.0 Enterprise Linux 2003-12-06 5:47 ` William Lee Irwin III 2003-12-13 11:57 ` acpi related error neel vanan @ 2004-01-05 11:56 ` neel vanan 2004-01-05 12:08 ` Christophe Saout ` (2 more replies) 1 sibling, 3 replies; 14+ messages in thread From: neel vanan @ 2004-01-05 11:56 UTC (permalink / raw) To: William Lee Irwin III; +Cc: linux-kernel Hi all, The kernel I have working is version 2.4.21-4.EL and I can still boot up to that. I compiled a 2.6.0 version and installed it in exactly the same way that the old version is, just appending 2.6.0 to the end of the file. so when I reboot I get a boot screen that shows: Red Hat Enterprise Linux AS (2.4.21-4.ELsmp) Red Hat Enterprise Linux As-up (2.4.21-4.EL) Red Hat linux (2.6.0) Enterprise linux still boots up fine but when I try and boot up Red Hat linux (2.6.0) I get some ouput and then a kernel panic with this message: <snip> Software Suspend has malfunctioning SMP support. Disabled :( ACPI: (supports S0 S1 S4 S5) RAMDISK: Compressed image found at block 0 RAMDISK: incomplete write (-1 !=32768) 4194304 VFS cannot open root device "LABEL=/" or unknown block (0,0) Please append a correct "root=" boot option Kernel panic: VFS: Unable to mount root fs on unknown-block(0,0) I am running Linux Enterprise Edition version 3.0 on my server. It has 2 Xeon processors and 1 U360 scsi HD. The whole reason behind my compiling a kernel is trying to get support for high memory (this machine has 4 gigs of ram) and multi-processor support. I'm pretty sure I selected all scsi and driver support because when i run the same kernel with RedHat Linux 9.0 in same machine it works fine. Everything is compiled in and not as modules. This is snip of my grub.conf file: # grub.conf generated by anaconda # default=0 timeout=10 splashimage=(hd0,0)/grub/splash.xpm title RedHat Enterprise Linux AS (2.4.21-4.ELsmp) root (hd0,0) kernel /vmlinuz-2.4.21-4.EL ro root=LABEL=/ initrd /initrd-2.4.21-4.EL.img title RedHat Linux (2.6.0) root (hd0,0) kernel /linux-2.6.0 ro root=LABEL=/ initrd /initrd-2.6.0.img Any help would be greatly appreciated! Thanks in advance, Neel __________________________________ Do you Yahoo!? Find out what made the Top Yahoo! Searches of 2003 http://search.yahoo.com/top2003 ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Kernel panic.. in 3.0 Enterprise Linux 2004-01-05 11:56 ` Kernel panic.. in 3.0 Enterprise Linux neel vanan @ 2004-01-05 12:08 ` Christophe Saout 2004-01-05 12:23 ` Rik van Riel 2004-01-05 12:21 ` Andreas Unterkircher 2004-01-05 12:24 ` Arjan van de Ven 2 siblings, 1 reply; 14+ messages in thread From: Christophe Saout @ 2004-01-05 12:08 UTC (permalink / raw) To: neel vanan; +Cc: William Lee Irwin III, linux-kernel Am Mo, den 05.01.2004 schrieb neel vanan um 12:56: > VFS cannot open root device "LABEL=/" or unknown block > (0,0) > Please append a correct "root=" boot option > Kernel panic: VFS: Unable to mount root fs on > unknown-block(0,0) LABEL= is a RedHat extension. Please use the normal root options that is described in the Grub or kernel documentation. ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Kernel panic.. in 3.0 Enterprise Linux 2004-01-05 12:08 ` Christophe Saout @ 2004-01-05 12:23 ` Rik van Riel 2004-01-05 12:33 ` Christophe Saout 0 siblings, 1 reply; 14+ messages in thread From: Rik van Riel @ 2004-01-05 12:23 UTC (permalink / raw) To: Christophe Saout; +Cc: neel vanan, William Lee Irwin III, linux-kernel On Mon, 5 Jan 2004, Christophe Saout wrote: > Am Mo, den 05.01.2004 schrieb neel vanan um 12:56: > > > VFS cannot open root device "LABEL=/" or unknown block > > (0,0) > > Please append a correct "root=" boot option > > Kernel panic: VFS: Unable to mount root fs on > > unknown-block(0,0) > > LABEL= is a RedHat extension. Please use the normal root options that is > described in the Grub or kernel documentation. It's not even a Red Hat extension. The LABEL= stuff is done entirely in userspace, on the initrd. If you do not want to use an initrd, you need to use the normal root options instead, something like root=/dev/hda3 -- "Debugging is twice as hard as writing the code in the first place. Therefore, if you write the code as cleverly as possible, you are, by definition, not smart enough to debug it." - Brian W. Kernighan ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Kernel panic.. in 3.0 Enterprise Linux 2004-01-05 12:23 ` Rik van Riel @ 2004-01-05 12:33 ` Christophe Saout 0 siblings, 0 replies; 14+ messages in thread From: Christophe Saout @ 2004-01-05 12:33 UTC (permalink / raw) To: Rik van Riel; +Cc: neel vanan, William Lee Irwin III, linux-kernel Am Mo, den 05.01.2004 schrieb Rik van Riel um 13:23: > On Mon, 5 Jan 2004, Christophe Saout wrote: > > > > LABEL= is a RedHat extension. Please use the normal root options that is > > described in the Grub or kernel documentation. > > It's not even a Red Hat extension. The LABEL= stuff is > done entirely in userspace, on the initrd. I was misinformed then. Thanks. > RAMDISK: Compressed image found at block 0 > RAMDISK: incomplete write (-1 !=32768) 4194304 > VFS cannot open root device "LABEL=/" or unknown block (0,0) His initrd can't be correctly loaded. It seems the initrd is larger than 4MiB but he didn't increase the maximum size in the kernel configuration. ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Kernel panic.. in 3.0 Enterprise Linux 2004-01-05 11:56 ` Kernel panic.. in 3.0 Enterprise Linux neel vanan 2004-01-05 12:08 ` Christophe Saout @ 2004-01-05 12:21 ` Andreas Unterkircher 2004-01-05 12:24 ` Arjan van de Ven 2 siblings, 0 replies; 14+ messages in thread From: Andreas Unterkircher @ 2004-01-05 12:21 UTC (permalink / raw) To: neel vanan; +Cc: linux-kernel have you rebuild your initrd? you have written you have compile in all needed things - so do you still need the initrd? if not - try to remove the line... andreas Am Mon, den 05.01.2004 schrieb neel vanan um 12:56: > Hi all, > > The kernel I have working is version 2.4.21-4.EL and I > can still boot up to that. I compiled a 2.6.0 version > and installed it in exactly the same way that the old > version is, just appending 2.6.0 to the end of the > file. so when I reboot I get a boot screen that shows: > > Red Hat Enterprise Linux AS (2.4.21-4.ELsmp) > Red Hat Enterprise Linux As-up (2.4.21-4.EL) > Red Hat linux (2.6.0) > > Enterprise linux still boots up fine but when I try > and boot up Red Hat linux (2.6.0) I get some ouput and > then a kernel panic with this message: > > <snip> > Software Suspend has malfunctioning SMP support. > Disabled :( > ACPI: (supports S0 S1 S4 S5) > RAMDISK: Compressed image found at block 0 > RAMDISK: incomplete write (-1 !=32768) 4194304 > VFS cannot open root device "LABEL=/" or unknown block > (0,0) > Please append a correct "root=" boot option > Kernel panic: VFS: Unable to mount root fs on > unknown-block(0,0) > > I am running Linux Enterprise Edition version 3.0 on > my server. It has 2 Xeon processors and 1 U360 scsi > HD. The whole reason behind my compiling a kernel is > trying to get support for high memory (this > machine has 4 gigs of ram) and multi-processor > support. > > I'm pretty sure I selected all scsi and driver support > because when i run the same kernel with RedHat Linux > 9.0 in same machine it works fine. Everything is > compiled in and not as modules. > > This is snip of my grub.conf file: > # grub.conf generated by anaconda > # > default=0 > timeout=10 > splashimage=(hd0,0)/grub/splash.xpm > title RedHat Enterprise Linux AS (2.4.21-4.ELsmp) > root (hd0,0) > kernel /vmlinuz-2.4.21-4.EL ro root=LABEL=/ > initrd /initrd-2.4.21-4.EL.img > title RedHat Linux (2.6.0) > root (hd0,0) > kernel /linux-2.6.0 ro root=LABEL=/ > initrd /initrd-2.6.0.img > > Any help would be greatly appreciated! Thanks in > advance, > > Neel > > > __________________________________ > Do you Yahoo!? > Find out what made the Top Yahoo! Searches of 2003 > http://search.yahoo.com/top2003 > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Kernel panic.. in 3.0 Enterprise Linux 2004-01-05 11:56 ` Kernel panic.. in 3.0 Enterprise Linux neel vanan 2004-01-05 12:08 ` Christophe Saout 2004-01-05 12:21 ` Andreas Unterkircher @ 2004-01-05 12:24 ` Arjan van de Ven 2004-01-05 12:43 ` Kresimir Sparavec 2004-01-07 7:56 ` 2.6.0 works with 3.0 Enterprise Linux or not neel vanan 2 siblings, 2 replies; 14+ messages in thread From: Arjan van de Ven @ 2004-01-05 12:24 UTC (permalink / raw) To: neel vanan; +Cc: William Lee Irwin III, linux-kernel [-- Attachment #1: Type: text/plain, Size: 676 bytes --] On Mon, 2004-01-05 at 12:56, neel vanan wrote: > Hi all, > > The kernel I have working is version 2.4.21-4.EL and I > can still boot up to that. I compiled a 2.6.0 version > and installed it in exactly the same way that the old > version is, just appending 2.6.0 to the end of the > file. so when I reboot I get a boot screen that shows: > > Red Hat Enterprise Linux AS (2.4.21-4.ELsmp) > Red Hat Enterprise Linux As-up (2.4.21-4.EL) > Red Hat linux (2.6.0) RHEL3 isn't quite 2.6 ready btw; you need to update quite a few packages to get it working right. Also if you use mount-by-label you do need to create an initrd (with a 2.6 capable mkinitrd)... [-- Attachment #2: This is a digitally signed message part --] [-- Type: application/pgp-signature, Size: 189 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Kernel panic.. in 3.0 Enterprise Linux 2004-01-05 12:24 ` Arjan van de Ven @ 2004-01-05 12:43 ` Kresimir Sparavec 2004-01-06 21:18 ` Lukas Postupa 2004-01-07 7:56 ` 2.6.0 works with 3.0 Enterprise Linux or not neel vanan 1 sibling, 1 reply; 14+ messages in thread From: Kresimir Sparavec @ 2004-01-05 12:43 UTC (permalink / raw) To: Arjan van de Ven; +Cc: neel vanan, William Lee Irwin III, linux-kernel On Mon, Jan 05, 2004 at 01:24:38PM +0100, Arjan van de Ven wrote: > On Mon, 2004-01-05 at 12:56, neel vanan wrote: > > Hi all, > > > > The kernel I have working is version 2.4.21-4.EL and I > > can still boot up to that. I compiled a 2.6.0 version > > and installed it in exactly the same way that the old > > version is, just appending 2.6.0 to the end of the > > file. so when I reboot I get a boot screen that shows: > > > > Red Hat Enterprise Linux AS (2.4.21-4.ELsmp) > > Red Hat Enterprise Linux As-up (2.4.21-4.EL) > > Red Hat linux (2.6.0) > > RHEL3 isn't quite 2.6 ready btw; you need to update quite a few packages > to get it working right. could you please summarize which ones? i upgraded modutils and modified rc.sysinit for usb support. the rest works unmodified (except NVIDIA proprietary kernel driver which does not have 2.6.x support yet, but XFree86 driver works fine for me) as far as i can tell. i got exactly 0 (zero) kernel panics up to now. compared with 2.4.0 few years ago, 2.6.0 works like charm > > Also if you use mount-by-label you do need to create an initrd (with a > 2.6 capable mkinitrd)... > ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Kernel panic.. in 3.0 Enterprise Linux 2004-01-05 12:43 ` Kresimir Sparavec @ 2004-01-06 21:18 ` Lukas Postupa 0 siblings, 0 replies; 14+ messages in thread From: Lukas Postupa @ 2004-01-06 21:18 UTC (permalink / raw) To: linux-kernel [-- Attachment #1: Type: text/plain, Size: 231 bytes --] Kresimir Sparavec wrote: > the rest works unmodified (except NVIDIA > proprietary kernel driver which does not have 2.6.x support yet, but XFree86 > driver works fine for me) Take a look at http://www.minion.de/ . Lukas [-- Attachment #2: Dies ist ein digital signierter Nachrichtenteil --] [-- Type: application/pgp-signature, Size: 189 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* 2.6.0 works with 3.0 Enterprise Linux or not... 2004-01-05 12:24 ` Arjan van de Ven 2004-01-05 12:43 ` Kresimir Sparavec @ 2004-01-07 7:56 ` neel vanan 1 sibling, 0 replies; 14+ messages in thread From: neel vanan @ 2004-01-07 7:56 UTC (permalink / raw) To: linux-kernel; +Cc: wli Hi All, I had posted my problem in mailing list i didn't get proper response. I would like to know whether 2.6.0 works properly with Enterprise Linux 3.0 or or not. For me it works fine with RedHat Linux9.0 but same kernel didn't boot with EL 3.0. Arjan had replied that i have to upgrade some packages but how many that is mystery. If i have to upgrade than how many packages i should upgrade. I have already upgraded mkinitrd and modutils still it gives this error while booting: Software Suspend has malfunctioning SMP support. Disabled :( ACPI: (supports S0 S1 S4 S5) RAMDISK: Compressed image found at block 0 RAMDISK: incomplete write (-1 !=32768) 4194304 VFS cannot open root device "LABEL=/" or unknown block (0,0) Please append a correct "root=" boot option Kernel panic: VFS: Unable to mount root fs on unknown-block(0,0) I had also tried root=/dev/sda2 and also root=0802. But still it is not booting. Help needed urgently, Thanks in advance. Neel. __________________________________ Do you Yahoo!? Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes http://hotjobs.sweepstakes.yahoo.com/signingbonus ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2004-01-07 7:56 UTC | newest] Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- [not found] <S263478AbTLEJ0s/20031205092648Z+878@vger.kernel.org> 2003-12-05 9:34 ` Kernel panic neel vanan 2003-12-05 14:19 ` William Lee Irwin III 2003-12-06 5:47 ` William Lee Irwin III 2003-12-13 11:57 ` acpi related error neel vanan 2003-12-13 12:03 ` William Lee Irwin III 2004-01-05 11:56 ` Kernel panic.. in 3.0 Enterprise Linux neel vanan 2004-01-05 12:08 ` Christophe Saout 2004-01-05 12:23 ` Rik van Riel 2004-01-05 12:33 ` Christophe Saout 2004-01-05 12:21 ` Andreas Unterkircher 2004-01-05 12:24 ` Arjan van de Ven 2004-01-05 12:43 ` Kresimir Sparavec 2004-01-06 21:18 ` Lukas Postupa 2004-01-07 7:56 ` 2.6.0 works with 3.0 Enterprise Linux or not neel vanan
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).