linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Carlos Bilbao <bilbao@vt.edu>
To: Andrew Lunn <andrew@lunn.ch>
Cc: 3chas3@gmail.com, linux-atm-general@lists.sourceforge.net,
	gregkh@linuxfoundation.org, linux-kernel@vger.kernel.org
Subject: [PATCH net-next v2] drivers: atm: Follow the indentation coding standard on printks
Date: Thu, 08 Jul 2021 13:27:39 -0400	[thread overview]
Message-ID: <108389762.nniJfEyVGO@iron-maiden> (raw)
In-Reply-To: <YOceNJYQJiPh3qhc@lunn.ch>

Fix indentation of printks that start at the beginning of the line. Change this 
for the right number of space characters, or tabs if the file uses them. Also
directly remove the printks inside #if 0.

Signed-off-by: Carlos Bilbao <bilbao@vt.edu>
---
Changelog: 
- Replaced printk for DPRINTK on suni.c
- Directly removed the #if 0 printks.
---
 drivers/atm/eni.c    | 23 -----------------------
 drivers/atm/iphase.c |  4 ++--
 drivers/atm/suni.c   |  4 ----
 drivers/atm/zatm.c   | 22 +---------------------
 4 files changed, 3 insertions(+), 50 deletions(-)

diff --git a/drivers/atm/eni.c b/drivers/atm/eni.c
index 422753d52244..d766500e91a2 100644
--- a/drivers/atm/eni.c
+++ b/drivers/atm/eni.c
@@ -1448,25 +1448,6 @@ static int start_tx(struct atm_dev *dev)
 	return 0;
 }
 
-
-/*--------------------------------- common ----------------------------------*/
-
-
-#if 0 /* may become useful again when tuning things */
-
-static void foo(void)
-{
-printk(KERN_INFO
-  "tx_complete=%d,dma_complete=%d,queued=%d,requeued=%d,sub=%d,\n"
-  "backlogged=%d,rx_enqueued=%d,rx_dequeued=%d,putting=%d,pushed=%d\n",
-  tx_complete,dma_complete,queued,requeued,submitted,backlogged,
-  rx_enqueued,rx_dequeued,putting,pushed);
-if (eni_boards) printk(KERN_INFO "loss: %ld\n",ENI_DEV(eni_boards)->lost);
-}
-
-#endif
-
-
 static void bug_int(struct atm_dev *dev,unsigned long reason)
 {
 	DPRINTK(">bug_int\n");
@@ -1509,9 +1490,6 @@ static irqreturn_t eni_int(int irq,void *dev_id)
 	if (reason & MID_SUNI_INT) {
 		EVENT("SUNI int\n",0,0);
 		dev->phy->interrupt(dev);
-#if 0
-		foo();
-#endif
 	}
 	spin_lock(&eni_dev->lock);
 	eni_dev->events |= reason;
@@ -1901,7 +1879,6 @@ static void eni_close(struct atm_vcc *vcc)
 	kfree(ENI_VCC(vcc));
 	vcc->dev_data = NULL;
 	clear_bit(ATM_VF_ADDR,&vcc->flags);
-	/*foo();*/
 }
 
 
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index bc8e8d9f176b..8a3ee51e6c9f 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -1246,8 +1246,8 @@ static void rx_intr(struct atm_dev *dev)
                ((iadev->rx_pkt_cnt - iadev->rx_tmp_cnt) == 0)) {
         for (i = 1; i <= iadev->num_rx_desc; i++)
                free_desc(dev, i);
-printk("Test logic RUN!!!!\n");
-        writew( ~(RX_FREEQ_EMPT|RX_EXCP_RCVD),iadev->reass_reg+REASS_MASK_REG);
+        printk("Test logic RUN!!!!\n");
+ 	writew( ~(RX_FREEQ_EMPT|RX_EXCP_RCVD),iadev->reass_reg+REASS_MASK_REG);
         iadev->rxing = 1;
      }
      IF_EVENT(printk("Rx intr status: RX_FREEQ_EMPT %08x\n", status);)  
diff --git a/drivers/atm/suni.c b/drivers/atm/suni.c
index 21e5acc766b8..eaafcfc3b229 100644
--- a/drivers/atm/suni.c
+++ b/drivers/atm/suni.c
@@ -327,10 +327,6 @@ static int suni_start(struct atm_dev *dev)
 	if (first) {
 		timer_setup(&poll_timer, suni_hz, 0);
 		poll_timer.expires = jiffies+HZ;
-#if 0
-printk(KERN_DEBUG "[u] p=0x%lx,n=0x%lx\n",(unsigned long) poll_timer.list.prev,
-    (unsigned long) poll_timer.list.next);
-#endif
 		add_timer(&poll_timer);
 	}
 	return 0;
diff --git a/drivers/atm/zatm.c b/drivers/atm/zatm.c
index cf5fffcf98a1..a487fcb9282d 100644
--- a/drivers/atm/zatm.c
+++ b/drivers/atm/zatm.c
@@ -379,18 +379,6 @@ static void poll_rx(struct atm_dev *dev,int mbx)
 		if (((pos += 16) & 0xffff) == zatm_dev->mbx_end[mbx])
 			pos = zatm_dev->mbx_start[mbx];
 		cells = here[0] & uPD98401_AAL5_SIZE;
-#if 0
-printk("RX IND: 0x%x, 0x%x, 0x%x, 0x%x\n",here[0],here[1],here[2],here[3]);
-{
-unsigned long *x;
-		printk("POOL: 0x%08x, 0x%08x\n",zpeekl(zatm_dev,
-		      zatm_dev->pool_base),
-		      zpeekl(zatm_dev,zatm_dev->pool_base+1));
-		x = (unsigned long *) here[2];
-		printk("[0..3] = 0x%08lx, 0x%08lx, 0x%08lx, 0x%08lx\n",
-		    x[0],x[1],x[2],x[3]);
-}
-#endif
 		error = 0;
 		if (here[3] & uPD98401_AAL5_ERR) {
 			error = (here[3] & uPD98401_AAL5_ES) >>
@@ -402,16 +390,8 @@ EVENT("error code 0x%x/0x%x\n",(here[3] & uPD98401_AAL5_ES) >>
   uPD98401_AAL5_ES_SHIFT,error);
 		skb = ((struct rx_buffer_head *) bus_to_virt(here[2]))->skb;
 		__net_timestamp(skb);
-#if 0
-printk("[-3..0] 0x%08lx 0x%08lx 0x%08lx 0x%08lx\n",((unsigned *) skb->data)[-3],
-  ((unsigned *) skb->data)[-2],((unsigned *) skb->data)[-1],
-  ((unsigned *) skb->data)[0]);
-#endif
 		EVENT("skb 0x%lx, here 0x%lx\n",(unsigned long) skb,
 		    (unsigned long) here);
-#if 0
-printk("dummy: 0x%08lx, 0x%08lx\n",dummy[0],dummy[1]);
-#endif
 		size = error ? 0 : ntohs(((__be16 *) skb->data)[cells*
 		    ATM_CELL_PAYLOAD/sizeof(u16)-3]);
 		EVENT("got skb 0x%lx, size %d\n",(unsigned long) skb,size);
@@ -664,7 +644,7 @@ static int do_tx(struct sk_buff *skb)
 		EVENT("dsc (0x%lx)\n",(unsigned long) dsc,0);
 	}
 	else {
-printk("NONONONOO!!!!\n");
+		printk("NONONONOO!!!!\n");
 		dsc = NULL;
 #if 0
 		u32 *put;
-- 
2.25.1





  parent reply	other threads:[~2021-07-08 17:27 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-08 13:10 [PATCH] drivers: Follow the indentation coding standard on printks Carlos Bilbao
2021-07-08 14:40 ` Greg KH
2021-07-08 15:19   ` [PATCH] drivers: atm: " Carlos Bilbao
2021-07-08 15:48     ` Andrew Lunn
2021-07-08 17:06       ` Carlos Bilbao
2021-07-08 17:23         ` [PATCH net-next v2] " Carlos Bilbao
2021-07-08 17:27       ` Carlos Bilbao [this message]
2021-07-08 18:15         ` Andrew Lunn
2021-07-08 14:53 ` [PATCH] drivers: " Andrew Lunn
2021-07-08 15:08   ` Carlos Bilbao
2021-07-08 21:25 ` Rolf Eike Beer
2021-07-09  0:27   ` Stephen Hemminger
2021-07-09  6:43   ` Helge Deller
2021-07-09 10:30     ` bilbao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=108389762.nniJfEyVGO@iron-maiden \
    --to=bilbao@vt.edu \
    --cc=3chas3@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-atm-general@lists.sourceforge.net \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).