From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261951AbVAHGTd (ORCPT ); Sat, 8 Jan 2005 01:19:33 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261958AbVAHGTd (ORCPT ); Sat, 8 Jan 2005 01:19:33 -0500 Received: from mail.kroah.org ([69.55.234.183]:33670 "EHLO perch.kroah.org") by vger.kernel.org with ESMTP id S261951AbVAHFs5 convert rfc822-to-8bit (ORCPT ); Sat, 8 Jan 2005 00:48:57 -0500 Subject: Re: [PATCH] USB and Driver Core patches for 2.6.10 In-Reply-To: <11051632671729@kroah.com> X-Mailer: gregkh_patchbomb Date: Fri, 7 Jan 2005 21:47:48 -0800 Message-Id: <11051632671745@kroah.com> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII To: linux-usb-devel@lists.sourceforge.net, linux-kernel@vger.kernel.org Content-Transfer-Encoding: 7BIT From: Greg KH Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org ChangeSet 1.1938.446.36, 2004/12/17 15:40:33-08:00, hkneissel@t-online.de [PATCH] Re: garmin gps driver patch 0.23 From: Hermann Kneissel Signed-off-by: Greg Kroah-Hartman drivers/usb/serial/Kconfig | 13 drivers/usb/serial/Makefile | 1 drivers/usb/serial/garmin_gps.c | 1542 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 1556 insertions(+) diff -Nru a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig --- a/drivers/usb/serial/Kconfig 2005-01-07 15:44:51 -08:00 +++ b/drivers/usb/serial/Kconfig 2005-01-07 15:44:51 -08:00 @@ -202,6 +202,19 @@ To compile this driver as a module, choose M here: the module will be called io_ti. +config USB_SERIAL_GARMIN + tristate "Garmin GPS driver" + depends on USB_SERIAL + help + Say Y here if you want to connect to your Garmin GPS. + Should work with most Garmin GPS devices which have a native USB port. + + See for the latest + version of the driver. + + To compile this driver as a module, choose M here: the + module will be called garmin_gps. + config USB_SERIAL_IPW tristate "USB IPWireless (3G UMTS TDD) Driver (EXPERIMENTAL)" depends on USB_SERIAL && EXPERIMENTAL diff -Nru a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile --- a/drivers/usb/serial/Makefile 2005-01-07 15:44:51 -08:00 +++ b/drivers/usb/serial/Makefile 2005-01-07 15:44:51 -08:00 @@ -19,6 +19,7 @@ obj-$(CONFIG_USB_SERIAL_EDGEPORT_TI) += io_ti.o obj-$(CONFIG_USB_SERIAL_EMPEG) += empeg.o obj-$(CONFIG_USB_SERIAL_FTDI_SIO) += ftdi_sio.o +obj-$(CONFIG_USB_SERIAL_GARMIN) += garmin_gps.o obj-$(CONFIG_USB_SERIAL_IPAQ) += ipaq.o obj-$(CONFIG_USB_SERIAL_IPW) += ipw.o obj-$(CONFIG_USB_SERIAL_IR) += ir-usb.o diff -Nru a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c --- /dev/null Wed Dec 31 16:00:00 196900 +++ b/drivers/usb/serial/garmin_gps.c 2005-01-07 15:44:51 -08:00 @@ -0,0 +1,1542 @@ +/* + * Garmin GPS driver + * + * Copyright (C) 2004 Hermann Kneissel hkneissel@t-online.de + * + * The latest version of the driver can be found at + * http://sourceforge.net/projects/garmin-gps/ + * + * This driver has been derived from v2.1 of the visor driver. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* the mode to be set when the port ist opened */ +static int initial_mode = 1; + +/* debug flag */ +static int debug = 0; + +#include "usb-serial.h" + +#define GARMIN_VENDOR_ID 0x091E + +/* + * Version Information + */ + +#define VERSION_MAJOR 0 +#define VERSION_MINOR 23 + +#define _STR(s) #s +#define _DRIVER_VERSION(a,b) "v" _STR(a) "." _STR(b) +#define DRIVER_VERSION _DRIVER_VERSION(VERSION_MAJOR, VERSION_MINOR) +#define DRIVER_AUTHOR "hermann kneissel" +#define DRIVER_DESC "garmin gps driver" + +/* error codes returned by the driver */ +#define EINVPKT 1000 /* invalid packet structure */ + + +// size of the header of a packet using the usb protocol +#define GARMIN_PKTHDR_LENGTH 12 + +// max. possible size of a packet using the serial protocol +#define MAX_SERIAL_PKT_SIZ (3+255+3) + +// max. possible size of a packet with worst case stuffing +#define MAX_SERIAL_PKT_SIZ_STUFFED MAX_SERIAL_PKT_SIZ+256 + +// size of a buffer able to hold a complete (no stuffing) packet +// (the document protocol does not contain packets with a larger +// size, but in theory a packet may be 64k+12 bytes - if in +// later protocol versions larger packet sizes occur, this value +// should be increased accordingly, so the input buffer is always +// large enough the store a complete packet inclusive header) +#define GPS_IN_BUFSIZ (GARMIN_PKTHDR_LENGTH+MAX_SERIAL_PKT_SIZ) + +// size of a buffer able to hold a complete (incl. stuffing) packet +#define GPS_OUT_BUFSIZ (GARMIN_PKTHDR_LENGTH+MAX_SERIAL_PKT_SIZ_STUFFED) + +// where to place the packet id of a serial packet, so we can +// prepend the usb-packet header without the need to move the +// packets data +#define GSP_INITIAL_OFFSET (GARMIN_PKTHDR_LENGTH-2) + +// max. size of incoming private packets (header+1 param) +#define PRIVPKTSIZ (GARMIN_PKTHDR_LENGTH+4) + +#define GARMIN_LAYERID_TRANSPORT 0 +#define GARMIN_LAYERID_APPL 20 +// our own layer-id to use for some control mechanisms +#define GARMIN_LAYERID_PRIVATE 0x01106E4B + +#define GARMIN_PKTID_PVT_DATA 51 +#define GARMIN_PKTID_L001_COMMAND_DATA 10 + +#define CMND_ABORT_TRANSFER 0 + +// packet ids used in private layer +#define PRIV_PKTID_SET_DEBUG 1 +#define PRIV_PKTID_SET_MODE 2 +#define PRIV_PKTID_INFO_REQ 3 +#define PRIV_PKTID_INFO_RESP 4 +#define PRIV_PKTID_RESET_REQ 5 +#define PRIV_PKTID_SET_DEF_MODE 6 + + +#define ETX 0x03 +#define DLE 0x10 +#define ACK 0x06 +#define NAK 0x15 + +/* structure used to queue incoming packets */ +struct garmin_packet { + struct list_head list; + int seq; + int size; // the real size of the data array, always > 0 + __u8 data[1]; +}; + +/* structure used to keep the current state of the driver */ +struct garmin_data { + __u8 state; + __u16 flags; + __u8 mode; + __u8 ignorePkts; + __u8 count; + __u8 pkt_id; + __u32 serial_num; + struct timer_list timer; + struct usb_serial_port *port; + int seq_counter; + int insize; + int outsize; + __u8 inbuffer [GPS_IN_BUFSIZ]; /* tty -> usb */ + __u8 outbuffer[GPS_OUT_BUFSIZ]; /* usb -> tty */ + __u8 privpkt[4*6]; + spinlock_t lock; + struct list_head pktlist; +}; + + +#define STATE_NEW 0 +#define STATE_INITIAL_DELAY 1 +#define STATE_TIMEOUT 2 +#define STATE_SESSION_REQ1 3 +#define STATE_SESSION_REQ2 4 +#define STATE_ACTIVE 5 + +#define STATE_RESET 8 +#define STATE_DISCONNECTED 9 +#define STATE_WAIT_TTY_ACK 10 +#define STATE_GSP_WAIT_DATA 11 + +#define MODE_NATIVE 0 +#define MODE_GARMIN_SERIAL 1 + +// Flags used in garmin_data.flags: +#define FLAGS_SESSION_REPLY_MASK 0x00C0 +#define FLAGS_SESSION_REPLY1_SEEN 0x0080 +#define FLAGS_SESSION_REPLY2_SEEN 0x0040 +#define FLAGS_BULK_IN_ACTIVE 0x0020 +#define FLAGS_THROTTLED 0x0010 +#define CLEAR_HALT_REQUIRED 0x0001 + +#define FLAGS_QUEUING 0x0100 +#define FLAGS_APP_RESP_SEEN 0x0200 +#define FLAGS_APP_REQ_SEEN 0x0400 +#define FLAGS_DROP_DATA 0x0800 + +#define FLAGS_GSP_SKIP 0x1000 +#define FLAGS_GSP_DLESEEN 0x2000 + + + + + + +/* function prototypes */ +static void gsp_next_packet(struct garmin_data * garmin_data_p); +static int garmin_write_bulk(struct usb_serial_port *port, + const unsigned char *buf, int count); + +/* some special packets to be send or received */ +static unsigned char const GARMIN_START_SESSION_REQ[] + = { 0, 0, 0, 0, 5, 0, 0, 0, 0, 0, 0, 0 }; +static unsigned char const GARMIN_START_SESSION_REQ2[] + = { 0, 0, 0, 0, 16, 0, 0, 0, 0, 0, 0, 0 }; +static unsigned char const GARMIN_START_SESSION_REPLY[] + = { 0, 0, 0, 0, 6, 0, 0, 0, 4, 0, 0, 0 }; +static unsigned char const GARMIN_SESSION_ACTIVE_REPLY[] + = { 0, 0, 0, 0, 17, 0, 0, 0, 4, 0, 0, 0, 0, 16, 0, 0 }; +static unsigned char const GARMIN_BULK_IN_AVAIL_REPLY[] + = { 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0 }; +static unsigned char const GARMIN_APP_LAYER_REPLY[] + = { 0x14, 0, 0, 0 }; +static unsigned char const GARMIN_START_PVT_REQ[] + = { 20, 0, 0, 0, 10, 0, 0, 0, 2, 0, 0, 0, 49, 0 }; +static unsigned char const GARMIN_STOP_PVT_REQ[] + = { 20, 0, 0, 0, 10, 0, 0, 0, 2, 0, 0, 0, 50, 0 }; +static unsigned char const GARMIN_STOP_TRANSFER_REQ[] + = { 20, 0, 0, 0, 10, 0, 0, 0, 2, 0, 0, 0, 0, 0 }; +static unsigned char const GARMIN_STOP_TRANSFER_REQ_V2[] + = { 20, 0, 0, 0, 10, 0, 0, 0, 1, 0, 0, 0, 0 }; +static unsigned char const PRIVATE_REQ[] + = { 0x4B, 0x6E, 0x10, 0x01, 0xFF, 0, 0, 0, 0xFF, 0, 0, 0 }; + + + +static struct usb_device_id id_table [] = { + /* the same device id seems to be used by all usb enabled gps devices */ + { USB_DEVICE(GARMIN_VENDOR_ID, 3 ) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE (usb, id_table); + +static struct usb_driver garmin_driver = { + .owner = THIS_MODULE, + .name = "garmin_gps", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = id_table, +}; + + +static inline int noResponseFromAppLayer(struct garmin_data * garmin_data_p) +{ + return ((garmin_data_p->flags + & (FLAGS_APP_REQ_SEEN|FLAGS_APP_RESP_SEEN)) + == FLAGS_APP_REQ_SEEN); +} + + +static inline int getLayerId(const __u8 *usbPacket) +{ + return __le32_to_cpup((__le32 *)(usbPacket)); +} + +static inline int getPacketId(const __u8 *usbPacket) +{ + return __le32_to_cpup((__le32 *)(usbPacket+4)); +} + +static inline int getDataLength(const __u8 *usbPacket) +{ + return __le32_to_cpup((__le32 *)(usbPacket+8)); +} + + +/* + * check if the usb-packet in buf contains an abort-transfer command. + * (if yes, all queued data will be dropped) + */ +static inline int isAbortTrfCmnd(const unsigned char *buf) +{ + if (0 == memcmp(buf, GARMIN_STOP_TRANSFER_REQ, + sizeof(GARMIN_STOP_TRANSFER_REQ)) || + 0 == memcmp(buf, GARMIN_STOP_TRANSFER_REQ_V2, + sizeof(GARMIN_STOP_TRANSFER_REQ_V2))) + return 1; + else + return 0; +} + + + +static void send_to_tty(struct usb_serial_port *port, + char *data, unsigned int actual_length) +{ + struct tty_struct *tty = port->tty; + int i; + + if (tty && actual_length) { + + usb_serial_debug_data(debug, &port->dev, + __FUNCTION__, actual_length, data); + + for (i = 0; i < actual_length ; ++i) { + /* if we insert more than TTY_FLIPBUF_SIZE characters, + we drop them. */ + if(tty->flip.count >= TTY_FLIPBUF_SIZE) { + tty_flip_buffer_push(tty); + } + /* this doesn't actually push the data through unless + tty->low_latency is set */ + tty_insert_flip_char(tty, data[i], 0); + } + tty_flip_buffer_push(tty); + } +} + + +/****************************************************************************** + * packet queue handling + ******************************************************************************/ + +/* + * queue a received (usb-)packet for later processing + */ +static int pkt_add(struct garmin_data * garmin_data_p, + unsigned char *data, unsigned int data_length) +{ + int result = 0; + unsigned long flags; + struct garmin_packet *pkt; + + /* process only packets containg data ... */ + if (data_length) { + garmin_data_p->flags |= FLAGS_QUEUING; + pkt = kmalloc(sizeof(struct garmin_packet)+data_length, + GFP_ATOMIC); + if (pkt == 0) { + dev_err(&garmin_data_p->port->dev, "out of memory\n"); + return 0; + } + pkt->size = data_length; + memcpy(pkt->data, data, data_length); + + spin_lock_irqsave(&garmin_data_p->lock, flags); + result = list_empty(&garmin_data_p->pktlist); + pkt->seq = garmin_data_p->seq_counter++; + list_add_tail(&pkt->list, &garmin_data_p->pktlist); + spin_unlock_irqrestore(&garmin_data_p->lock, flags); + + /* in serial mode, if someone is waiting for data from + the device, iconvert and send the next packet to tty. */ + if (result && (garmin_data_p->state == STATE_GSP_WAIT_DATA)) { + gsp_next_packet(garmin_data_p); + } + } + return result; +} + + +/* get the next pending packet */ +static struct garmin_packet *pkt_pop(struct garmin_data * garmin_data_p) +{ + unsigned long flags; + struct garmin_packet *result = 0; + + spin_lock_irqsave(&garmin_data_p->lock, flags); + if (!list_empty(&garmin_data_p->pktlist)) { + result = (struct garmin_packet *)garmin_data_p->pktlist.next; + list_del(&result->list); + } + spin_unlock_irqrestore(&garmin_data_p->lock, flags); + return result; +} + + +/* free up all queued data */ +static void pkt_clear(struct garmin_data * garmin_data_p) +{ + unsigned long flags; + struct garmin_packet *result = 0; + + dbg("%s", __FUNCTION__); + + spin_lock_irqsave(&garmin_data_p->lock, flags); + while (!list_empty(&garmin_data_p->pktlist)) { + result = (struct garmin_packet *)garmin_data_p->pktlist.next; + list_del(&result->list); + kfree(result); + } + spin_unlock_irqrestore(&garmin_data_p->lock, flags); +} + + +/****************************************************************************** + * garmin serial protocol handling handling + ******************************************************************************/ + +/* send an ack packet back to the tty */ +static int gsp_send_ack(struct garmin_data * garmin_data_p, __u8 pkt_id) +{ + __u8 pkt[10]; + __u8 cksum = 0; + __u8 *ptr = pkt; + unsigned l = 0; + + dbg("%s - pkt-id: 0x%X.", __FUNCTION__, 0xFF & pkt_id); + + *ptr++ = DLE; + *ptr++ = ACK; + cksum += ACK; + + *ptr++ = 2; + cksum += 2; + + *ptr++ = pkt_id; + cksum += pkt_id; + + if (pkt_id == DLE) { + *ptr++ = DLE; + } + + *ptr++ = 0; + *ptr++ = 0xFF & (-cksum); + *ptr++ = DLE; + *ptr++ = ETX; + + l = ptr-pkt; + + send_to_tty(garmin_data_p->port, pkt, l); + return 0; +} + + + +/* + * called for a complete packet received from tty layer + * + * the complete packet (pkzid ... cksum) is in garmin_data_p->inbuf starting + * at GSP_INITIAL_OFFSET. + * + * count - number of bytes in the input buffer including space reserved for + * the usb header: GSP_INITIAL_OFFSET + number of bytes in packet + * (including pkt-id, data-length a. cksum) + */ +static int gsp_rec_packet(struct garmin_data * garmin_data_p, int count) +{ + const __u8* recpkt = garmin_data_p->inbuffer+GSP_INITIAL_OFFSET; + __le32 *usbdata = (__le32 *) garmin_data_p->inbuffer; + + int cksum = 0; + int n = 0; + int pktid = recpkt[0]; + int size = recpkt[1]; + + usb_serial_debug_data(debug, &garmin_data_p->port->dev, + __FUNCTION__, count-GSP_INITIAL_OFFSET, recpkt); + + if (size != (count-GSP_INITIAL_OFFSET-3)) { + dbg("%s - invalid size, expected %d bytes, got %d", + __FUNCTION__, size, (count-GSP_INITIAL_OFFSET-3)); + return -EINVPKT; + } + + cksum += *recpkt++; + cksum += *recpkt++; + + // sanity check, remove after test ... + if ((__u8*)&(usbdata[3]) != recpkt) { + dbg("%s - ptr mismatch %p - %p", + __FUNCTION__, &(usbdata[4]), recpkt); + return -EINVPKT; + } + + while (n < size) { + cksum += *recpkt++; + n++; + } + + if ((0xff & (cksum + *recpkt)) != 0) { + dbg("%s - invalid checksum, expected %02x, got %02x", + __FUNCTION__, 0xff & -cksum, 0xff & *recpkt); + return -EINVPKT; + } + + usbdata[0] = __cpu_to_le32(GARMIN_LAYERID_APPL); + usbdata[1] = __cpu_to_le32(pktid); + usbdata[2] = __cpu_to_le32(size); + + garmin_write_bulk (garmin_data_p->port, garmin_data_p->inbuffer, + GARMIN_PKTHDR_LENGTH+size); + + /* if this was an abort-transfer command, flush all + queued data. */ + if (isAbortTrfCmnd(garmin_data_p->inbuffer)) { + garmin_data_p->flags |= FLAGS_DROP_DATA; + pkt_clear(garmin_data_p); + } + + return count; +} + + + +/* + * Called for data received from tty + * + * buf contains the data read, it may span more than one packet or even + * incomplete packets + * + * input record should be a serial-record, but it may not be complete. + * Copy it into our local buffer, until an etx is seen (or an error + * occurs). + * Once the record is complete, convert into a usb packet and send it + * to the bulk pipe, send an ack back to the tty. + * + * If the input is an ack, just send the last queued packet to the + * tty layer. + * + * if the input is an abort command, drop all queued data. + */ + +static int gsp_receive(struct garmin_data * garmin_data_p, + const unsigned char *buf, int count) +{ + int offs = 0; + int ack_or_nak_seen = 0; + int i = 0; + __u8 *dest = garmin_data_p->inbuffer; + int size = garmin_data_p->insize; + // dleSeen: set if last byte read was a DLE + int dleSeen = garmin_data_p->flags & FLAGS_GSP_DLESEEN; + // skip: if set, skip incoming data until possible start of + // new packet + int skip = garmin_data_p->flags & FLAGS_GSP_SKIP; + __u8 data; + + dbg("%s - dle=%d skip=%d size=%d count=%d", + __FUNCTION__, dleSeen, skip, size, count); + + if (size == 0) { + size = GSP_INITIAL_OFFSET; + } + + while (offs < count) { + + data = *(buf+offs); + offs ++; + + if (data == DLE) { + if (skip) { /* start of a new pkt */ + skip = 0; + size = GSP_INITIAL_OFFSET; + dleSeen = 1; + } else if (dleSeen) { + dest[size++] = data; + dleSeen = 0; + } else { + dleSeen = 1; + } + } else if (data == ETX) { + if (dleSeen) { + /* packet complete */ + + data = dest[GSP_INITIAL_OFFSET]; + + if (data == ACK) { + ack_or_nak_seen = ACK; + dbg("ACK packet complete."); + } else if (data == NAK) { + ack_or_nak_seen = NAK; + dbg("NAK packet complete."); + } else { + dbg("packet complete " + "- id=0x%X.", + 0xFF & data); + gsp_rec_packet(garmin_data_p, size); + } + + skip = 1; + size = GSP_INITIAL_OFFSET; + dleSeen = 0; + } else { + dest[size++] = data; + } + } else if (!skip) { + + if (dleSeen) { + dbg("non-masked DLE at %d - restarting", i); + size = GSP_INITIAL_OFFSET; + dleSeen = 0; + } + + dest[size++] = data; + } + + if (size >= GPS_IN_BUFSIZ) { + dbg("%s - packet too large.", __FUNCTION__); + skip = 1; + size = GSP_INITIAL_OFFSET; + dleSeen = 0; + } + } + + garmin_data_p->insize = size; + + // copy flags back to structure + if (skip) + garmin_data_p->flags |= FLAGS_GSP_SKIP; + else + garmin_data_p->flags &= ~FLAGS_GSP_SKIP; + + if (dleSeen) + garmin_data_p->flags |= FLAGS_GSP_DLESEEN; + else + garmin_data_p->flags &= ~FLAGS_GSP_DLESEEN; + + if (ack_or_nak_seen) { + garmin_data_p->state = STATE_GSP_WAIT_DATA; + gsp_next_packet(garmin_data_p); + } + + return count; +} + + + + +/* + * Sends a usb packet to the tty + * + * Assumes, that all packages and at an usb-packet boundary. + * + * return <0 on error, 0 if packet is incomplete or > 0 if packet was sent + */ +int gsp_send(struct garmin_data * garmin_data_p, const unsigned char *buf, + int count) +{ + const unsigned char *src; + unsigned char *dst; + int pktid = 0; + int datalen = 0; + int cksum = 0; + int i=0; + int k; + + dbg("%s - state %d - %d bytes.", __FUNCTION__, + garmin_data_p->state, count); + + k = garmin_data_p->outsize; + if ((k+count) > GPS_OUT_BUFSIZ) { + dbg("packet too large"); + garmin_data_p->outsize = 0; + return -4; + } + + memcpy(garmin_data_p->outbuffer+k, buf, count); + k += count; + garmin_data_p->outsize = k; + + if (k >= GARMIN_PKTHDR_LENGTH) { + pktid = getPacketId(garmin_data_p->outbuffer); + datalen= getDataLength(garmin_data_p->outbuffer); + i = GARMIN_PKTHDR_LENGTH + datalen; + if (k < i) + return 0; + } else { + return 0; + } + + dbg("%s - %d bytes in buffer, %d bytes in pkt.", __FUNCTION__, + k, i); + + /* garmin_data_p->outbuffer now contains a complete packet */ + + usb_serial_debug_data(debug, &garmin_data_p->port->dev, + __FUNCTION__, k, garmin_data_p->outbuffer); + + garmin_data_p->outsize = 0; + + if (GARMIN_LAYERID_APPL != getLayerId(garmin_data_p->outbuffer)) { + dbg("not an application packet (%d)", + getLayerId(garmin_data_p->outbuffer)); + return -1; + } + + if (pktid > 255) { + dbg("packet-id %d too large", pktid); + return -2; + } + + if (datalen > 255) { + dbg("packet-size %d too large", datalen); + return -3; + } + + /* the serial protocol should be able to handle this packet */ + + k = 0; + src = garmin_data_p->outbuffer+GARMIN_PKTHDR_LENGTH; + for (i=0; ioutbuffer+GARMIN_PKTHDR_LENGTH; + if (k > (GARMIN_PKTHDR_LENGTH-2)) { + /* can't add stuffing DLEs in place, move data to end + of buffer ... */ + dst = garmin_data_p->outbuffer+GPS_OUT_BUFSIZ-datalen; + memcpy(dst, src, datalen); + src = dst; + } + + dst = garmin_data_p->outbuffer; + + *dst++ = DLE; + *dst++ = pktid; + cksum += pktid; + *dst++ = datalen; + cksum += datalen; + if (datalen == DLE) + *dst++ = DLE; + + for (i=0; ioutbuffer; + + send_to_tty(garmin_data_p->port, garmin_data_p->outbuffer, i); + + garmin_data_p->pkt_id = pktid; + garmin_data_p->state = STATE_WAIT_TTY_ACK; + + return i; +} + + + + + +/* + * Process the next pending data packet - if there is one + */ +static void gsp_next_packet(struct garmin_data * garmin_data_p) +{ + struct garmin_packet *pkt = 0; + + while ((pkt = pkt_pop(garmin_data_p)) != 0) + { + dbg("%s - next pkt: %d", __FUNCTION__, pkt->seq); + if (gsp_send(garmin_data_p, pkt->data, pkt->size) > 0) { + kfree(pkt); + return; + } + kfree(pkt); + } +} + + + + +/****************************************************************************** + * garmin native mode + ******************************************************************************/ + + +/* + * Called for data received from tty + * + * The input data is expected to be in garmin usb-packet format. + * + * buf contains the data read, it may span more than one packet + * or even incomplete packets + */ +static int nat_receive(struct garmin_data * garmin_data_p, + const unsigned char *buf, int count) +{ + __u8 * dest; + int offs = 0; + int result = count; + int len; + + while (offs < count) { + // if buffer contains header, copy rest of data + if (garmin_data_p->insize >= GARMIN_PKTHDR_LENGTH) + len = GARMIN_PKTHDR_LENGTH + +getDataLength(garmin_data_p->inbuffer); + else + len = GARMIN_PKTHDR_LENGTH; + + if (len >= GPS_IN_BUFSIZ) { + /* seem to be an invalid packet, ignore rest of input */ + dbg("%s - packet size too large: %d", + __FUNCTION__, len); + garmin_data_p->insize = 0; + count = 0; + result = -EINVPKT; + } else { + len -= garmin_data_p->insize; + if (len > (count-offs)) + len = (count-offs); + if (len > 0) { + dest = garmin_data_p->inbuffer + +garmin_data_p->insize; + memcpy(dest, buf+offs, len); + garmin_data_p->insize += len; + offs += len; + } + } + + /* do we have a complete packet ? */ + if (garmin_data_p->insize >= GARMIN_PKTHDR_LENGTH) { + len = GARMIN_PKTHDR_LENGTH+ + getDataLength(garmin_data_p->inbuffer); + if (garmin_data_p->insize >= len) { + garmin_write_bulk (garmin_data_p->port, + garmin_data_p->inbuffer, + len); + garmin_data_p->insize = 0; + + /* if this was an abort-transfer command, + flush all queued data. */ + if (isAbortTrfCmnd(garmin_data_p->inbuffer)) { + garmin_data_p->flags |= FLAGS_DROP_DATA; + pkt_clear(garmin_data_p); + } + } + } + } + return result; +} + + +/****************************************************************************** + * private packets + ******************************************************************************/ + +static void priv_status_resp(struct usb_serial_port *port) +{ + struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); + __le32 *pkt = (__le32 *)garmin_data_p->privpkt; + + pkt[0] = __cpu_to_le32(GARMIN_LAYERID_PRIVATE); + pkt[1] = __cpu_to_le32(PRIV_PKTID_INFO_RESP); + pkt[2] = __cpu_to_le32(12); + pkt[3] = __cpu_to_le32(VERSION_MAJOR << 16 | VERSION_MINOR); + pkt[4] = __cpu_to_le32(garmin_data_p->mode); + pkt[5] = __cpu_to_le32(garmin_data_p->serial_num); + + send_to_tty(port, (__u8*)pkt, 6*4); +} + + +/****************************************************************************** + * Garmin specific driver functions + ******************************************************************************/ + +static int process_resetdev_request(struct usb_serial_port *port) +{ + int status; + struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); + + garmin_data_p->flags &= ~(CLEAR_HALT_REQUIRED); + garmin_data_p->state = STATE_RESET; + garmin_data_p->serial_num = 0; + + usb_kill_urb (port->interrupt_in_urb); + dbg("%s - usb_reset_device", __FUNCTION__ ); + status = usb_reset_device(port->serial->dev); + if (status) + dbg("%s - usb_reset_device failed: %d", + __FUNCTION__, status); + return status; +} + + + +/* + * clear all cached data + */ +static int garmin_clear(struct garmin_data * garmin_data_p) +{ + int status = 0; + + struct usb_serial_port *port = garmin_data_p->port; + + if (port != 0 && garmin_data_p->flags & FLAGS_APP_RESP_SEEN) { + /* send a terminate command */ + status = garmin_write_bulk(port, GARMIN_STOP_TRANSFER_REQ, + sizeof(GARMIN_STOP_TRANSFER_REQ)); + } + + /* flush all queued data */ + pkt_clear(garmin_data_p); + + garmin_data_p->insize = 0; + garmin_data_p->outsize = 0; + + return status; +} + + + + + + +static int garmin_init_session(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); + int status = 0; + + if (status == 0) { + usb_kill_urb (port->interrupt_in_urb); + + dbg("%s - adding interrupt input", __FUNCTION__); + port->interrupt_in_urb->dev = serial->dev; + status = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (status) + dev_err(&serial->dev->dev, + "%s - failed submitting interrupt urb," + " error %d\n", + __FUNCTION__, status); + } + + if (status == 0) { + dbg("%s - starting session ...", __FUNCTION__); + garmin_data_p->state = STATE_ACTIVE; + status = garmin_write_bulk(port, GARMIN_START_SESSION_REQ, + sizeof(GARMIN_START_SESSION_REQ)); + + if (status >= 0) { + + garmin_data_p->ignorePkts++; + + /* not needed, but the win32 driver does it too ... */ + status = garmin_write_bulk(port, + GARMIN_START_SESSION_REQ2, + sizeof(GARMIN_START_SESSION_REQ2)); + if (status >= 0) { + status = 0; + garmin_data_p->ignorePkts++; + } + } + } + + return status; +} + + + + + +static int garmin_open (struct usb_serial_port *port, struct file *filp) +{ + int status = 0; + struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); + + dbg("%s - port %d", __FUNCTION__, port->number); + + /* + * Force low_latency on so that our tty_push actually forces the data + * through, otherwise it is scheduled, and with high data rates (like + * with OHCI) data can get lost. + */ + if (port->tty) + port->tty->low_latency = 1; + + garmin_data_p->mode = initial_mode; + garmin_data_p->count = 0; + garmin_data_p->flags = 0; + + /* shutdown any bulk reads that might be going on */ + usb_kill_urb (port->write_urb); + usb_kill_urb (port->read_urb); + + if (garmin_data_p->state == STATE_RESET) { + status = garmin_init_session(port); + } + + garmin_data_p->state = STATE_ACTIVE; + + return status; +} + + +static void garmin_close (struct usb_serial_port *port, struct file * filp) +{ + struct usb_serial *serial = port->serial; + struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); + + dbg("%s - port %d - mode=%d state=%d flags=0x%X", __FUNCTION__, + port->number, garmin_data_p->mode, + garmin_data_p->state, garmin_data_p->flags); + + if (!serial) + return; + + garmin_clear(garmin_data_p); + + /* shutdown our urbs */ + usb_kill_urb (port->read_urb); + usb_kill_urb (port->write_urb); + + if (noResponseFromAppLayer(garmin_data_p) || + ((garmin_data_p->flags & CLEAR_HALT_REQUIRED) != 0)) { + process_resetdev_request(port); + garmin_data_p->state = STATE_RESET; + } else { + garmin_data_p->state = STATE_DISCONNECTED; + } +} + + +static void garmin_write_bulk_callback (struct urb *urb, struct pt_regs *regs) +{ + struct usb_serial_port *port = (struct usb_serial_port *)urb->context; + struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); + + /* free up the transfer buffer, as usb_free_urb() does not do this */ + kfree (urb->transfer_buffer); + + dbg("%s - port %d", __FUNCTION__, port->number); + + if (urb->status) { + dbg("%s - nonzero write bulk status received: %d", + __FUNCTION__, urb->status); + garmin_data_p->flags |= CLEAR_HALT_REQUIRED; + } + + schedule_work(&port->work); +} + + +static int garmin_write_bulk (struct usb_serial_port *port, + const unsigned char *buf, int count) +{ + struct usb_serial *serial = port->serial; + struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); + struct urb *urb; + unsigned char *buffer; + int status; + + dbg("%s - port %d, state %d", __FUNCTION__, port->number, + garmin_data_p->state); + + garmin_data_p->flags &= ~FLAGS_DROP_DATA; + + buffer = kmalloc (count, GFP_ATOMIC); + if (!buffer) { + dev_err(&port->dev, "out of memory\n"); + return -ENOMEM; + } + + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) { + dev_err(&port->dev, "no more free urbs\n"); + kfree (buffer); + return -ENOMEM; + } + + memcpy (buffer, buf, count); + + usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, buffer); + + usb_fill_bulk_urb (urb, serial->dev, + usb_sndbulkpipe (serial->dev, + port->bulk_out_endpointAddress), + buffer, count, + garmin_write_bulk_callback, port); + urb->transfer_flags |= URB_ZERO_PACKET; + + if (GARMIN_LAYERID_APPL == getLayerId(buffer)) { + garmin_data_p->flags |= FLAGS_APP_REQ_SEEN; + if (garmin_data_p->mode == MODE_GARMIN_SERIAL) { + pkt_clear(garmin_data_p); + garmin_data_p->state = STATE_GSP_WAIT_DATA; + } + } + + /* send it down the pipe */ + status = usb_submit_urb(urb, GFP_ATOMIC); + if (status) { + dev_err(&port->dev, + "%s - usb_submit_urb(write bulk) " + "failed with status = %d\n", + __FUNCTION__, status); + count = status; + } else { + + if (GARMIN_LAYERID_APPL == getLayerId(buffer) + && (garmin_data_p->mode == MODE_GARMIN_SERIAL)) { + + gsp_send_ack(garmin_data_p, buffer[4]); + } + } + + /* we are done with this urb, so let the host driver + * really free it when it is finished with it */ + usb_free_urb (urb); + + return count; +} + + + +static int garmin_write (struct usb_serial_port *port, + const unsigned char *buf, int count) +{ + int pktid, pktsiz, len; + struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); + __le32 *privpkt = (__le32 *)garmin_data_p->privpkt; + + usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, buf); + + /* check for our private packets */ + if (count >= GARMIN_PKTHDR_LENGTH) { + + len = PRIVPKTSIZ; + if (count < len) + len = count; + + memcpy(garmin_data_p->privpkt, buf, len); + + pktsiz = getDataLength(garmin_data_p->privpkt); + pktid = getPacketId(garmin_data_p->privpkt); + + if (count == (GARMIN_PKTHDR_LENGTH+pktsiz) + && GARMIN_LAYERID_PRIVATE == getLayerId(garmin_data_p->privpkt)) { + + dbg("%s - processing private request %d", + __FUNCTION__, pktid); + + // drop all unfinished transfers + garmin_clear(garmin_data_p); + + switch(pktid) { + + case PRIV_PKTID_SET_DEBUG: + if (pktsiz != 4) + return -EINVPKT; + debug = __le32_to_cpu(privpkt[3]); + dbg("%s - debug level set to 0x%X", + __FUNCTION__, debug); + break; + + case PRIV_PKTID_SET_MODE: + if (pktsiz != 4) + return -EINVPKT; + garmin_data_p->mode = __le32_to_cpu(privpkt[3]); + dbg("%s - mode set to %d", + __FUNCTION__, garmin_data_p->mode); + break; + + case PRIV_PKTID_INFO_REQ: + priv_status_resp(port); + break; + + case PRIV_PKTID_RESET_REQ: + garmin_data_p->flags |= FLAGS_APP_REQ_SEEN; + break; + + case PRIV_PKTID_SET_DEF_MODE: + if (pktsiz != 4) + return -EINVPKT; + initial_mode = __le32_to_cpu(privpkt[3]); + dbg("%s - initial_mode set to %d", + __FUNCTION__, + garmin_data_p->mode); + break; + } + return count; + } + } + + if (garmin_data_p->mode == MODE_GARMIN_SERIAL) { + return gsp_receive(garmin_data_p, buf, count); + } else { /* MODE_NATIVE */ + return nat_receive(garmin_data_p, buf, count); + } +} + + +static int garmin_write_room (struct usb_serial_port *port) +{ + /* + * Report back the bytes currently available in the output buffer. + */ + struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); + return GPS_OUT_BUFSIZ-garmin_data_p->outsize; +} + + +static int garmin_chars_in_buffer (struct usb_serial_port *port) +{ + /* + * Report back the number of bytes currently in our input buffer. + * Will this lock up the driver - the buffer contains an incomplete + * package which will not be written to the device until it + * has been completed ? + */ + //struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); + //return garmin_data_p->insize; + return 0; +} + + +static void garmin_read_process(struct garmin_data * garmin_data_p, + unsigned char *data, unsigned data_length) +{ + if (garmin_data_p->flags & FLAGS_DROP_DATA) { + /* abort-transfer cmd is actice */ + dbg("%s - pkt dropped", __FUNCTION__); + } else if (garmin_data_p->state != STATE_DISCONNECTED && + garmin_data_p->state != STATE_RESET ) { + + /* remember any appl.layer packets, so we know + if a reset is required or not when closing + the device */ + if (0 == memcmp(data, GARMIN_APP_LAYER_REPLY, + sizeof(GARMIN_APP_LAYER_REPLY))) + garmin_data_p->flags |= FLAGS_APP_RESP_SEEN; + + /* if throttling is active or postprecessing is required + put the received data in th input queue, otherwise + send it directly to the tty port */ + if (garmin_data_p->flags & FLAGS_QUEUING) { + pkt_add(garmin_data_p, data, data_length); + } else if (garmin_data_p->mode == MODE_GARMIN_SERIAL) { + if (getLayerId(data) == GARMIN_LAYERID_APPL) { + pkt_add(garmin_data_p, data, data_length); + } + } else { + send_to_tty(garmin_data_p->port, data, data_length); + } + } +} + + +static void garmin_read_bulk_callback (struct urb *urb, struct pt_regs *regs) +{ + struct usb_serial_port *port = (struct usb_serial_port *)urb->context; + struct usb_serial *serial = port->serial; + struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); + unsigned char *data = urb->transfer_buffer; + int status; + + dbg("%s - port %d", __FUNCTION__, port->number); + + if (!serial) { + dbg("%s - bad serial pointer, exiting", __FUNCTION__); + return; + } + + if (urb->status) { + dbg("%s - nonzero read bulk status received: %d", + __FUNCTION__, urb->status); + return; + } + + usb_serial_debug_data(debug, &port->dev, + __FUNCTION__, urb->actual_length, data); + + garmin_read_process(garmin_data_p, data, urb->actual_length); + + /* Continue trying to read until nothing more is received */ + if (urb->actual_length > 0) { + usb_fill_bulk_urb (port->read_urb, serial->dev, + usb_rcvbulkpipe (serial->dev, + port->bulk_in_endpointAddress), + port->read_urb->transfer_buffer, + port->read_urb->transfer_buffer_length, + garmin_read_bulk_callback, port); + status = usb_submit_urb(port->read_urb, GFP_ATOMIC); + if (status) + dev_err(&port->dev, + "%s - failed resubmitting read urb, error %d\n", + __FUNCTION__, status); + } + return; +} + + +static void garmin_read_int_callback (struct urb *urb, struct pt_regs *regs) +{ + int status; + struct usb_serial_port *port = (struct usb_serial_port *)urb->context; + struct usb_serial *serial = port->serial; + struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); + unsigned char *data = urb->transfer_buffer; + + switch (urb->status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dbg("%s - urb shutting down with status: %d", + __FUNCTION__, urb->status); + return; + default: + dbg("%s - nonzero urb status received: %d", + __FUNCTION__, urb->status); + return; + } + + usb_serial_debug_data(debug, &port->dev, __FUNCTION__, + urb->actual_length, urb->transfer_buffer); + + if (urb->actual_length == sizeof(GARMIN_BULK_IN_AVAIL_REPLY) && + 0 == memcmp(data, GARMIN_BULK_IN_AVAIL_REPLY, + sizeof(GARMIN_BULK_IN_AVAIL_REPLY))) { + + dbg("%s - bulk data available.", __FUNCTION__); + + /* bulk data available */ + usb_fill_bulk_urb (port->read_urb, serial->dev, + usb_rcvbulkpipe (serial->dev, + port->bulk_in_endpointAddress), + port->read_urb->transfer_buffer, + port->read_urb->transfer_buffer_length, + garmin_read_bulk_callback, port); + status = usb_submit_urb(port->read_urb, GFP_KERNEL); + if (status) { + dev_err(&port->dev, + "%s - failed submitting read urb, error %d\n", + __FUNCTION__, status); + } + + } else if (urb->actual_length == (4+sizeof(GARMIN_START_SESSION_REPLY)) + && 0 == memcmp(data, GARMIN_START_SESSION_REPLY, + sizeof(GARMIN_START_SESSION_REPLY))) { + + garmin_data_p->flags |= FLAGS_SESSION_REPLY1_SEEN; + + /* save the serial number */ + garmin_data_p->serial_num + = __le32_to_cpup((__le32*)(data+GARMIN_PKTHDR_LENGTH)); + + dbg("%s - start-of-session reply seen - serial %u.", + __FUNCTION__, garmin_data_p->serial_num); + } + + if (garmin_data_p->ignorePkts) { + /* this reply belongs to a request generated by the driver, + ignore it. */ + dbg("%s - pkt ignored (%d)", + __FUNCTION__, garmin_data_p->ignorePkts); + garmin_data_p->ignorePkts--; + } else { + garmin_read_process(garmin_data_p, data, urb->actual_length); + } + + port->interrupt_in_urb->dev = port->serial->dev; + status = usb_submit_urb (urb, GFP_ATOMIC); + if (status) + dev_err(&urb->dev->dev, + "%s - Error %d submitting interrupt urb\n", + __FUNCTION__, status); +} + + +/* + * Sends the next queued packt to the tty port (garmin native mode only) + * and then sets a timer to call itself again until all queued data + * is sent. + */ +static int garmin_flush_queue(struct garmin_data * garmin_data_p) +{ + struct garmin_packet *pkt; + + if ((garmin_data_p->flags & FLAGS_THROTTLED) == 0) { + pkt = pkt_pop(garmin_data_p); + if (pkt != 0) { + + send_to_tty(garmin_data_p->port, pkt->data, pkt->size); + kfree(pkt); + mod_timer(&garmin_data_p->timer, (1)+jiffies); + + } else { + garmin_data_p->flags &= ~FLAGS_QUEUING; + } + } + return 0; +} + + +static void garmin_throttle (struct usb_serial_port *port) +{ + struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); + + dbg("%s - port %d", __FUNCTION__, port->number); + /* set flag, data received will be put into a queue + for later processing */ + garmin_data_p->flags |= FLAGS_QUEUING|FLAGS_THROTTLED; +} + + +static void garmin_unthrottle (struct usb_serial_port *port) +{ + struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); + + dbg("%s - port %d", __FUNCTION__, port->number); + garmin_data_p->flags &= ~FLAGS_THROTTLED; + + /* in native mode send queued data to tty, in + serial mode nothing needs to be done here */ + if (garmin_data_p->mode == MODE_NATIVE) + garmin_flush_queue(garmin_data_p); +} + + + +/* + * The timer is currently only used to send queued packets to + * the tty in cases where the protocol provides no own handshaking + * to initiate the transfer. + */ +static void timeout_handler(unsigned long data) +{ + struct garmin_data *garmin_data_p = (struct garmin_data *) data; + + /* send the next queued packet to the tty port */ + if (garmin_data_p->mode == MODE_NATIVE) + if (garmin_data_p->flags & FLAGS_QUEUING) + garmin_flush_queue(garmin_data_p); +} + + + +static int garmin_attach (struct usb_serial *serial) +{ + int status = 0; + struct usb_serial_port *port = serial->port[0]; + struct garmin_data * garmin_data_p = 0; + + dbg("%s", __FUNCTION__); + + garmin_data_p = kmalloc (sizeof(struct garmin_data), GFP_KERNEL); + if (garmin_data_p == NULL) { + dev_err(&port->dev, "%s - Out of memory\n", __FUNCTION__); + return -ENOMEM; + } + memset (garmin_data_p, 0, sizeof(struct garmin_data)); + init_timer(&garmin_data_p->timer); + spin_lock_init(&garmin_data_p->lock); + INIT_LIST_HEAD(&garmin_data_p->pktlist); + //garmin_data_p->timer.expires = jiffies + session_timeout; + garmin_data_p->timer.data = (unsigned long)garmin_data_p; + garmin_data_p->timer.function = timeout_handler; + garmin_data_p->port = port; + garmin_data_p->state = 0; + garmin_data_p->count = 0; + usb_set_serial_port_data(port, garmin_data_p); + + status = garmin_init_session(port); + + return status; +} + + +static void garmin_shutdown (struct usb_serial *serial) +{ + struct usb_serial_port *port = serial->port[0]; + struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); + + dbg("%s", __FUNCTION__); + + usb_kill_urb (port->interrupt_in_urb); + del_timer_sync(&garmin_data_p->timer); + kfree (garmin_data_p); + usb_set_serial_port_data(port, NULL); +} + + + + + + + +/* All of the device info needed */ +static struct usb_serial_device_type garmin_device = { + .owner = THIS_MODULE, + .name = "Garmin GPS usb/tty", + .short_name = "garmin_gps", + .id_table = id_table, + .num_interrupt_in = 1, + .num_bulk_in = 1, + .num_bulk_out = 1, + .num_ports = 1, + .open = garmin_open, + .close = garmin_close, + .throttle = garmin_throttle, + .unthrottle = garmin_unthrottle, + .attach = garmin_attach, + .shutdown = garmin_shutdown, + .write = garmin_write, + .write_room = garmin_write_room, + .chars_in_buffer = garmin_chars_in_buffer, + .write_bulk_callback = garmin_write_bulk_callback, + .read_bulk_callback = garmin_read_bulk_callback, + .read_int_callback = garmin_read_int_callback, +}; + + +static int __init garmin_init (void) +{ + int retval; + + retval = usb_serial_register(&garmin_device); + if (retval) + goto failed_garmin_register; + retval = usb_register(&garmin_driver); + if (retval) + goto failed_usb_register; + info(DRIVER_DESC " " DRIVER_VERSION); + + return 0; +failed_usb_register: + usb_serial_deregister(&garmin_device); +failed_garmin_register: + return retval; +} + + +static void __exit garmin_exit (void) +{ + usb_deregister (&garmin_driver); + usb_serial_deregister (&garmin_device); +} + + + + +module_init(garmin_init); +module_exit(garmin_exit); + +MODULE_AUTHOR( DRIVER_AUTHOR ); +MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_LICENSE("GPL"); + +module_param(debug, bool, S_IWUSR | S_IRUGO); +MODULE_PARM_DESC(debug, "Debug enabled or not"); +module_param(initial_mode, int, S_IRUGO); +MODULE_PARM_DESC(initial_mode, "Initial mode"); +