From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2992438AbXCGSUs (ORCPT ); Wed, 7 Mar 2007 13:20:48 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S2992443AbXCGSUs (ORCPT ); Wed, 7 Mar 2007 13:20:48 -0500 Received: from nn7.de ([85.214.94.156]:43762 "EHLO nn7.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2992438AbXCGSUl (ORCPT ); Wed, 7 Mar 2007 13:20:41 -0500 Subject: Re: Linux v2.6.21-rc3 From: Soeren Sonnenburg To: tglx@linutronix.de Cc: Linus Torvalds , Linux Kernel Mailing List , Jeff Garzik In-Reply-To: <1173277354.24738.620.camel@localhost.localdomain> References: <1173277354.24738.620.camel@localhost.localdomain> Content-Type: text/plain Content-Transfer-Encoding: 7bit Date: Wed, 07 Mar 2007 18:42:47 +0100 Message-Id: <1173289367.4368.3.camel@localhost> Mime-Version: 1.0 X-Mailer: Evolution 2.8.2.1 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On Wed, 2007-03-07 at 15:22 +0100, Thomas Gleixner wrote: > On Tue, 2007-03-06 at 20:59 -0800, Linus Torvalds wrote: > > We've finally hopefully started to put a dent in the regressions, > > especially the suspend/resume problems introduced since 2.6.20. > > Still having SATA breakage on resume: > > Caught that one (from screen) > > ATA: abnormal status 0x7F on port 0x000118cf > irq 21: nobody cared (try booting ......) > ... > Disabling IRQ #21 > > > During normal boot I see the "ATA: abnormal status 0x7F on port > 0x000118cf" once, but there the system behaves normal > > tglx maybe that is also causing the hang I am still seeing with the full config... :( (no display, no usb device activation, but I tend to think the mbp wants to access the hdd...) SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata1: port is slow to respond, please be patient (Status 0x80) ata1: port failed to respond (30 secs, Status 0x80) ATA: abnormal status 0x80 on port 0x000101f7 ATA: abnormal status 0x80 on port 0x000101f7 ATA: abnormal status 0x80 on port 0x000101f7 ATA: abnormal status 0x80 on port 0x000101f7 ATA: abnormal status 0x80 on port 0x000101f7 ata1.00: qc timeout (cmd 0xa1) ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) ata1.00: revalidation failed (errno=-5) ata1: failed to recover some devices, retrying in 5 secs ata1: port is slow to respond, please be patient (Status 0x80) ata1: port failed to respond (30 secs, Status 0x80) ATA: abnormal status 0x80 on port 0x000101f7 ATA: abnormal status 0x80 on port 0x000101f7 ATA: abnormal status 0x80 on port 0x000101f7 ATA: abnormal status 0x80 on port 0x000101f7 ATA: abnormal status 0x80 on port 0x000101f7 Soeren -- Sometimes, there's a moment as you're waking, when you become aware of the real world around you, but you're still dreaming.