From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932263AbcFJJoQ (ORCPT ); Fri, 10 Jun 2016 05:44:16 -0400 Received: from bhuna.collabora.co.uk ([46.235.227.227]:36380 "EHLO bhuna.collabora.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932106AbcFJJoK convert rfc822-to-8bit (ORCPT ); Fri, 10 Jun 2016 05:44:10 -0400 content-type: text/plain; charset="utf-8" in-reply-to: from: "Peter Senna Tschudin" X-Forward: 82.136.70.253 date: Fri, 10 Jun 2016 10:44:07 +0100 cc: linux-kernel@vger.kernel.org, "Kumar Gala" , "Philipp Zabel" , "Rob Herring" , martin.donnelly@ge.com, "Ian Campbell" , "Rob Herring" , akpm@linux-foundation.org, =?utf-8?q?linux-arm-kernel=40lists=2Einfradead=2Eorg?= , "dri-devel" , "Pawel Moll" , "Thierry Reding" , "Guenter Roeck" , "Greg Kroah-Hartman" , "Thierry Reding" , "Peter Senna Tschudin" , "Fabio Estevam" , jslaby@suse.cz, shawnguo@kernel.org, "David Miller" , martyn.welch@collabora.co.uk, linux@armlinux.org.uk, "Enric Balletbo i Serra" , peter.senna@gmail.com, "Yakir Yang" , "Mark Rutland" , =?utf-8?q?Heiko_St=C3=BCbner?= , rmk+kernel@armlinux.org.uk, "David Airlie" , kernel@pengutronix.de, "Takashi Iwai" , =?utf-8?q?devicetree=40vger=2Ekernel=2Eorg?= , "Mauro Carvalho Chehab" to: "Enric Balletbo Serra" MIME-Version: 1.0 message-id: <118c-575a8c00-3-6ba1f300@9863287> subject: =?utf-8?q?Re=3A?==?utf-8?q?_=5BPATCH?= V2 =?utf-8?q?4=2F5=5D?= =?utf-8?q?_drm=2Fbridge=3A?= Add driver for GE B850v3 =?utf-8?q?LVDS=2FDP++?= Bridge User-Agent: SOGoMail 2.3.11 content-transfer-encoding: 8BIT Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Enric, On Friday, June 10, 2016 09:39 CEST, Enric Balletbo Serra wrote: > Hi Peter, > > Only a few comments ;) Thanks a lot for the review! > > 2016-06-09 18:25 GMT+02:00 Peter Senna Tschudin : > > Add a driver that create a drm_bridge and a drm_connector for the LVDS > > to DP++ display bridge of the GE B850v3. > > > > There are two physical bridges on the video signal pipeline: a > > STDP4028(LVDS to DP) and a STDP2690(DP to DP++). The hardware and > > firmware made it complicated for this binding to comprise two device > > tree nodes, as the design goal is to configure both bridges based on > > the LVDS signal, which leave the driver powerless to control the video > > processing pipeline. The two bridges behaves as a single bridge, and > > the driver is only needed for telling the host about EDID / HPD, and > > for giving the host powers to ack interrupts. The video signal pipeline > > is as follows: > > > > Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output > > > > Cc: Enric Balletbo i Serra > > Cc: Philipp Zabel > > Cc: Rob Herring > > Cc: Fabio Estevam > > CC: David Airlie > > CC: Thierry Reding > > CC: Thierry Reding > > Signed-off-by: Peter Senna Tschudin > > --- > > Changes from V1: > > - New commit message > > - Removed 3 empty entry points > > - Removed memory leak from ge_b850v3_lvds_dp_get_modes() > > - Added a lock for mode setting > > - Removed a few blank lines > > - Changed the order at Makefile and Kconfig > > > > MAINTAINERS | 8 + > > drivers/gpu/drm/bridge/Kconfig | 11 + > > drivers/gpu/drm/bridge/Makefile | 1 + > > drivers/gpu/drm/bridge/ge_b850v3_lvds_dp.c | 392 +++++++++++++++++++++++++++++ > > 4 files changed, 412 insertions(+) > > create mode 100644 drivers/gpu/drm/bridge/ge_b850v3_lvds_dp.c > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > index 2ce5e91..2dd3d7f 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -5010,6 +5010,14 @@ W: https://linuxtv.org > > S: Maintained > > F: drivers/media/radio/radio-gemtek* > > > > +GENERAL ELECTRIC B850V3 LVDS/DP++ BRIDGE > > +M: Martin Donnelly > > +M: Peter Senna Tschudin > > +M: Martyn Welch > > +S: Maintained > > +F: drivers/gpu/drm/bridge/ge_b850v3_dp2.c > > +F: Documentation/devicetree/bindings/ge/b850v3_dp2_bridge.txt > > + > > GENERIC GPIO I2C DRIVER > > M: Haavard Skinnemoen > > S: Supported > > diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig > > index 8f7423f..93dae5bd 100644 > > --- a/drivers/gpu/drm/bridge/Kconfig > > +++ b/drivers/gpu/drm/bridge/Kconfig > > @@ -32,6 +32,17 @@ config DRM_DW_HDMI_AHB_AUDIO > > Designware HDMI block. This is used in conjunction with > > the i.MX6 HDMI driver. > > > > +config DRM_GE_B850V3_LVDS_DP > > + tristate "GE B850v3 LVDS to DP++ display bridge" > > + depends on OF > > + select DRM_KMS_HELPER > > + select DRM_PANEL > > + ---help--- > > + This is a driver for the display bridge of > > + GE B850v3 that convert dual channel LVDS > > + to DP++. This is used with the i.MX6 imx-ldb > > + driver. > > + > > config DRM_NXP_PTN3460 > > tristate "NXP PTN3460 DP/LVDS bridge" > > depends on OF > > diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile > > index 96b13b3..47ea6c1 100644 > > --- a/drivers/gpu/drm/bridge/Makefile > > +++ b/drivers/gpu/drm/bridge/Makefile > > @@ -3,6 +3,7 @@ ccflags-y := -Iinclude/drm > > obj-$(CONFIG_DRM_ANALOGIX_ANX78XX) += analogix-anx78xx.o > > obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o > > obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o > > +obj-$(CONFIG_DRM_GE_B850V3_LVDS_DP) += ge_b850v3_lvds_dp.o > > obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o > > obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o > > obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/ > > diff --git a/drivers/gpu/drm/bridge/ge_b850v3_lvds_dp.c b/drivers/gpu/drm/bridge/ge_b850v3_lvds_dp.c > > new file mode 100644 > > index 0000000..c73cd77 > > --- /dev/null > > +++ b/drivers/gpu/drm/bridge/ge_b850v3_lvds_dp.c > > @@ -0,0 +1,392 @@ > > +/* > > + * Driver for GE B850v3 DP display bridge > > + > > + * Copyright (c) 2016, Collabora Ltd. > > + * Copyright (c) 2016, General Electric Company > > + > > + * This program is free software; you can redistribute it and/or modify it > > + * under the terms and conditions of the GNU General Public License, > > + * version 2, as published by the Free Software Foundation. > > + > > + * This program is distributed in the hope it will be useful, but WITHOUT > > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or > > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for > > + * more details. > > + > > + * You should have received a copy of the GNU General Public License > > + * along with this program. If not, see . > > + > > + * This driver creates a drm_bridge and a drm_connector for the LVDS to DP++ > > + * display bridge of the GE B850v3. There are two physical bridges on the video > > + * signal pipeline: a STDP4028(LVDS to DP) and a STDP2690(DP to DP++). However > > + * the physical bridges are automatically configured by the input video signal, > > + * and the driver has no access to the video processing pipeline. The driver is > > + * only needed to read EDID from the STDP2690 and to handle HPD events from the > > + * STDP4028. The driver communicates with both bridges over i2c. The video > > + * signal pipeline is as follows: > > + * > > + * Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output > > + > > + * > > + */ > > +#include > > +#include > > +#include > > +#include > > +#include "drm_crtc.h" > > +#include "drm_crtc_helper.h" > > +#include "drm_edid.h" > > +#include "drmP.h" > > + > > +#define EDID_EXT_BLOCK_CNT 0x7E > > + > > +#define STDP4028_IRQ_OUT_CONF_REG 0x02 > > +#define STDP4028_DPTX_IRQ_EN_REG 0x3C > > +#define STDP4028_DPTX_IRQ_STS_REG 0x3D > > +#define STDP4028_DPTX_STS_REG 0x3E > > + > > +#define STDP4028_DPTX_DP_IRQ_EN 0x1000 > > + > > +#define STDP4028_DPTX_HOTPLUG_IRQ_EN 0x0400 > > +#define STDP4028_DPTX_LINK_CH_IRQ_EN 0x2000 > > +#define STDP4028_DPTX_IRQ_CONFIG \ > > + (STDP4028_DPTX_LINK_CH_IRQ_EN | STDP4028_DPTX_HOTPLUG_IRQ_EN) > > + > > +#define STDP4028_DPTX_HOTPLUG_STS 0x0200 > > +#define STDP4028_DPTX_LINK_STS 0x1000 > > +#define STDP4028_CON_STATE_CONNECTED \ > > + (STDP4028_DPTX_HOTPLUG_STS | STDP4028_DPTX_LINK_STS) > > + > > +#define STDP4028_DPTX_HOTPLUG_CH_STS 0x0400 > > +#define STDP4028_DPTX_LINK_CH_STS 0x2000 > > +#define STDP4028_DPTX_IRQ_CLEAR \ > > + (STDP4028_DPTX_LINK_CH_STS | STDP4028_DPTX_HOTPLUG_CH_STS) > > + > > +struct ge_b850v3_lvds_dp { > > + struct drm_connector connector; > > + struct drm_bridge bridge; > > + struct i2c_client *ge_b850v3_lvds_dp_i2c; > > + struct i2c_client *edid_i2c; > > + struct edid *edid; > > + struct mutex lock; > > +}; > > + > > +static inline struct ge_b850v3_lvds_dp * > > + bridge_to_ge_b850v3_lvds_dp(struct drm_bridge *bridge) > > +{ > > + return container_of(bridge, struct ge_b850v3_lvds_dp, bridge); > > +} > > + > > +static inline struct ge_b850v3_lvds_dp * > > + connector_to_ge_b850v3_lvds_dp(struct drm_connector *connector) > > +{ > > + return container_of(connector, struct ge_b850v3_lvds_dp, connector); > > +} > > + > > +static void ge_b850v3_lvds_dp_enable(struct drm_bridge *bridge) > > +{ > > +} > > + > > You can remove this function, see > http://lxr.free-electrons.com/source/drivers/gpu/drm/drm_bridge.c#L277 You are right, I removed the empty callbacks, but they returned due me doing something wrong when rebasing. V3 will be out soon. > > > +static void ge_b850v3_lvds_dp_disable(struct drm_bridge *bridge) > > +{ > > +} > > + > > And this one, see > http://lxr.free-electrons.com/source/drivers/gpu/drm/drm_bridge.c#L182 Same. This should not be here. > > > +u8 *stdp2690_get_edid(struct i2c_client *client) > > +{ > > + struct i2c_adapter *adapter = client->adapter; > > + unsigned char start = 0x00; > > + unsigned int total_size; > > + u8 *block = kmalloc(EDID_LENGTH, GFP_KERNEL); > > + > > + struct i2c_msg msgs[] = { > > + { > > + .addr = client->addr, > > + .flags = 0, > > + .len = 1, > > + .buf = &start, > > + }, { > > + .addr = client->addr, > > + .flags = I2C_M_RD, > > + .len = EDID_LENGTH, > > + .buf = block, > > + } > > + }; > > + > > + if (!block) > > + return NULL; > > + > > + if (i2c_transfer(adapter, msgs, 2) != 2) { > > + DRM_ERROR("Unable to read EDID.\n"); > > + goto err; > > + } > > + > > + if (!drm_edid_block_valid(block, 0, false, NULL)) { > > + DRM_ERROR("Invalid EDID block\n"); > > + goto err; > > + } > > + > > + total_size = (block[EDID_EXT_BLOCK_CNT] + 1) * EDID_LENGTH; > > + if (total_size > EDID_LENGTH) { > > + kfree(block); > > + block = kmalloc(total_size, GFP_KERNEL); > > + if (!block) > > + return NULL; > > + > > + /* Yes, read the entire buffer, and do not skip the first > > + * EDID_LENGTH bytes. > > + */ > > + start = 0x00; > > + msgs[1].len = total_size; > > + msgs[1].buf = block; > > + > > + if (i2c_transfer(adapter, msgs, 2) != 2) { > > + DRM_ERROR("Unable to read EDID extension blocks.\n"); > > + goto err; > > + } > > + } > > + > > + return block; > > + > > +err: > > + kfree(block); > > + return NULL; > > +} > > + > > +static int ge_b850v3_lvds_dp_get_modes(struct drm_connector *connector) > > +{ > > + struct ge_b850v3_lvds_dp *ptn_bridge; > > + struct i2c_client *client; > > + int num_modes = 0; > > + > > + ptn_bridge = connector_to_ge_b850v3_lvds_dp(connector); > > + client = ptn_bridge->edid_i2c; > > + > > + mutex_lock(&ptn_bridge->lock); > > + > > + kfree(ptn_bridge->edid); > > + ptn_bridge->edid = (struct edid *) stdp2690_get_edid(client); > > + > > + if (ptn_bridge->edid) { > > + drm_mode_connector_update_edid_property(connector, > > + ptn_bridge->edid); > > + num_modes = drm_add_edid_modes(connector, ptn_bridge->edid); > > + } > > + > > + mutex_unlock(&ptn_bridge->lock); > > + > > + return num_modes; > > +} > > + > > +static struct drm_encoder > > +*ge_b850v3_lvds_dp_best_encoder(struct drm_connector *connector) > > +{ > > + struct ge_b850v3_lvds_dp *ptn_bridge = > > + connector_to_ge_b850v3_lvds_dp(connector); > > + > > + return ptn_bridge->bridge.encoder; > > +} > > + > > +static const struct > > +drm_connector_helper_funcs ge_b850v3_lvds_dp_connector_helper_funcs = { > > + .get_modes = ge_b850v3_lvds_dp_get_modes, > > + .best_encoder = ge_b850v3_lvds_dp_best_encoder, > > +}; > > + > > +static enum drm_connector_status ge_b850v3_lvds_dp_detect( > > + struct drm_connector *connector, bool force) > > +{ > > + struct ge_b850v3_lvds_dp *ptn_bridge = > > + connector_to_ge_b850v3_lvds_dp(connector); > > + struct i2c_client *ge_b850v3_lvds_dp_i2c = > > + ptn_bridge->ge_b850v3_lvds_dp_i2c; > > + s32 link_state; > > + > > + link_state = i2c_smbus_read_word_data(ge_b850v3_lvds_dp_i2c, > > + STDP4028_DPTX_STS_REG); > > + > > + if (link_state == STDP4028_CON_STATE_CONNECTED) > > + return connector_status_connected; > > + > > + if (link_state == 0) > > + return connector_status_disconnected; > > + > > + return connector_status_unknown; > > +} > > + > > +static void ge_b850v3_lvds_dp_connector_destroy(struct drm_connector *connector) > > +{ > > + drm_connector_cleanup(connector); > > +} > > + > > +static const struct drm_connector_funcs ge_b850v3_lvds_dp_connector_funcs = { > > + .dpms = drm_helper_connector_dpms, > > + .fill_modes = drm_helper_probe_single_connector_modes, > > + .detect = ge_b850v3_lvds_dp_detect, > > + .destroy = ge_b850v3_lvds_dp_connector_destroy, > > +}; > > + > > +static irqreturn_t ge_b850v3_lvds_dp_irq_handler(int irq, void *dev_id) > > +{ > > + struct ge_b850v3_lvds_dp *ptn_bridge = dev_id; > > + struct i2c_client *ge_b850v3_lvds_dp_i2c > > + = ptn_bridge->ge_b850v3_lvds_dp_i2c; > > + > > + mutex_lock(&ptn_bridge->lock); > > + > > + i2c_smbus_write_word_data(ge_b850v3_lvds_dp_i2c, > > + STDP4028_DPTX_IRQ_STS_REG, STDP4028_DPTX_IRQ_CLEAR); > > + > > + mutex_unlock(&ptn_bridge->lock); > > + > > + if (ptn_bridge->connector.dev) > > + drm_kms_helper_hotplug_event(ptn_bridge->connector.dev); > > + > > + return IRQ_HANDLED; > > +} > > + > > +static int ge_b850v3_lvds_dp_attach(struct drm_bridge *bridge) > > +{ > > + struct ge_b850v3_lvds_dp *ptn_bridge > > + = bridge_to_ge_b850v3_lvds_dp(bridge); > > + struct drm_connector *connector = &ptn_bridge->connector; > > + struct i2c_client *ge_b850v3_lvds_dp_i2c > > + = ptn_bridge->ge_b850v3_lvds_dp_i2c; > > + int ret; > > + > > + if (!bridge->encoder) { > > + DRM_ERROR("Parent encoder object not found"); > > + return -ENODEV; > > + } > > + > > + connector->polled = DRM_CONNECTOR_POLL_HPD; > > + > > + drm_connector_helper_add(connector, > > + &ge_b850v3_lvds_dp_connector_helper_funcs); > > + > > + ret = drm_connector_init(bridge->dev, connector, > > + &ge_b850v3_lvds_dp_connector_funcs, > > + DRM_MODE_CONNECTOR_DisplayPort); > > + if (ret) { > > + DRM_ERROR("Failed to initialize connector with drm\n"); > > + return ret; > > + } > > + > > + ret = drm_mode_connector_attach_encoder(connector, bridge->encoder); > > + if (ret) > > + return ret; > > + > > + drm_bridge_enable(bridge); > > + if (ge_b850v3_lvds_dp_i2c->irq) { > > + drm_helper_hpd_irq_event(connector->dev); > > + > > + ret = devm_request_threaded_irq(&ge_b850v3_lvds_dp_i2c->dev, > > + ge_b850v3_lvds_dp_i2c->irq, NULL, > > + ge_b850v3_lvds_dp_irq_handler, > > + IRQF_TRIGGER_HIGH | IRQF_ONESHOT, > > + "ge-b850v3-lvds-dp", ptn_bridge); > > + if (ret) > > + return ret; > > + } > > + > > + return 0; > > +} > > + > > +static const struct drm_bridge_funcs ge_b850v3_lvds_dp_funcs = { > > + .enable = ge_b850v3_lvds_dp_enable, > > + .disable = ge_b850v3_lvds_dp_disable, > > Remove the above empty callbacks. Here too. > > > + .attach = ge_b850v3_lvds_dp_attach, > > +}; > > + > > +static int ge_b850v3_lvds_dp_probe(struct i2c_client *ge_b850v3_lvds_dp_i2c, > > + const struct i2c_device_id *id) > > +{ > > + struct device *dev = &ge_b850v3_lvds_dp_i2c->dev; > > + struct ge_b850v3_lvds_dp *ptn_bridge; > > + int ret; > > + u32 edid_i2c_reg; > > + > > + ptn_bridge = devm_kzalloc(dev, sizeof(*ptn_bridge), GFP_KERNEL); > > + if (!ptn_bridge) > > + return -ENOMEM; > > + > > + mutex_init(&ptn_bridge->lock); > > + > > + ptn_bridge->ge_b850v3_lvds_dp_i2c = ge_b850v3_lvds_dp_i2c; > > + ptn_bridge->bridge.driver_private = ptn_bridge; > > + i2c_set_clientdata(ge_b850v3_lvds_dp_i2c, ptn_bridge); > > + > > + ret = of_property_read_u32(dev->of_node, "edid-reg", &edid_i2c_reg); > > + if (ret) { > > + dev_err(dev, "edid-reg not specified, aborting...\n"); > > + return -ENODEV; > > + } > > + > > + ptn_bridge->edid_i2c = devm_kzalloc(dev, > > + sizeof(struct i2c_client), GFP_KERNEL); > > + > > + if (!ptn_bridge->edid_i2c) > > + return -ENOMEM; > > + > > + memcpy(ptn_bridge->edid_i2c, ge_b850v3_lvds_dp_i2c, > > + sizeof(struct i2c_client)); > > + > > + ptn_bridge->edid_i2c->addr = (unsigned short) edid_i2c_reg; > > + > > + /* Configures the bridge to re-enable interrupts after each ack */ > > + i2c_smbus_write_word_data(ge_b850v3_lvds_dp_i2c, > > + STDP4028_IRQ_OUT_CONF_REG, STDP4028_DPTX_DP_IRQ_EN); > > + i2c_smbus_write_word_data(ge_b850v3_lvds_dp_i2c, > > + STDP4028_DPTX_IRQ_EN_REG, STDP4028_DPTX_IRQ_CONFIG); > > + > > + /* Clear pending interrupts since power up. */ > > + i2c_smbus_write_word_data(ge_b850v3_lvds_dp_i2c, > > + STDP4028_DPTX_IRQ_STS_REG, STDP4028_DPTX_IRQ_CLEAR); > > + > > + ptn_bridge->bridge.funcs = &ge_b850v3_lvds_dp_funcs; > > + ptn_bridge->bridge.of_node = dev->of_node; > > + ret = drm_bridge_add(&ptn_bridge->bridge); > > + if (ret) { > > + DRM_ERROR("Failed to add bridge\n"); > > + return ret; > > + } > > + > > + return 0; > > +} > > + > > +static int ge_b850v3_lvds_dp_remove(struct i2c_client *ge_b850v3_lvds_dp_i2c) > > +{ > > + struct ge_b850v3_lvds_dp *ptn_bridge = > > + i2c_get_clientdata(ge_b850v3_lvds_dp_i2c); > > + > > + drm_bridge_remove(&ptn_bridge->bridge); > > Guess you need to free ptn_bridge->edid here. Thanks a lot! I'll fix it when sending V3. Thank you for the review!