linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Glauber de Oliveira Costa <gcosta@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: akpm@linux-foundation.org, glommer@gmail.com, tglx@linutronix.de,
	mingo@elte.hu, ehabkost@redhat.com, jeremy@goop.org,
	avi@qumranet.com, anthony@codemonkey.ws,
	virtualization@lists.linux-foundation.org, rusty@rustcorp.com.au,
	ak@suse.de, chrisw@sous-sol.org, rostedt@goodmis.org,
	hpa@zytor.com, Glauber de Oliveira Costa <gcosta@redhat.com>
Subject: [PATCH 4/8] unify paravirt parts of system.h
Date: Tue,  4 Dec 2007 14:06:24 -0200	[thread overview]
Message-ID: <11967844071346-git-send-email-gcosta@redhat.com> (raw)
In-Reply-To: <11967844032081-git-send-email-gcosta@redhat.com>

This patch moves the i386 control registers manipulation functions,
wbinvd, and clts functions to system.h. They are essentially the same
as in x86_64, except for the cr8 register, which we add.

With this, system.h paravirt comes for free in x86_64.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
---
 include/asm-x86/system.h    |  124 +++++++++++++++++++++++++++++++++++++++++++
 include/asm-x86/system_32.h |   94 --------------------------------
 include/asm-x86/system_64.h |   73 -------------------------
 3 files changed, 124 insertions(+), 167 deletions(-)

diff --git a/include/asm-x86/system.h b/include/asm-x86/system.h
index 1ac6088..f1fdc55 100644
--- a/include/asm-x86/system.h
+++ b/include/asm-x86/system.h
@@ -3,6 +3,8 @@
 
 #include <asm/asm.h>
 
+#include <linux/kernel.h>
+
 #ifdef CONFIG_X86_32
 # include "system_32.h"
 #else
@@ -38,6 +40,8 @@ __asm__ __volatile__ ("movw %%dx,%1\n\t" \
 #define set_base(ldt, base) _set_base(((char *)&(ldt)) , (base))
 #define set_limit(ldt, limit) _set_limit(((char *)&(ldt)) , ((limit)-1))
 
+extern void load_gs_index(unsigned);
+
 /*
  * Load a segment. Fall back on loading the zero
  * segment if something goes wrong..
@@ -72,6 +76,126 @@ static inline unsigned long get_limit(unsigned long segment)
 		:"=r" (__limit):"r" (segment));
 	return __limit+1;
 }
+
+static inline void native_clts(void)
+{
+	asm volatile ("clts");
+}
+
+/*
+ * Volatile isn't enough to prevent the compiler from reordering the
+ * read/write functions for the control registers and messing everything up.
+ * A memory clobber would solve the problem, but would prevent reordering of
+ * all loads stores around it, which can hurt performance. Solution is to
+ * use a variable and mimic reads and writes to it to enforce serialization
+ */
+static unsigned long __force_order;
+
+static inline unsigned long native_read_cr0(void)
+{
+	unsigned long val;
+	asm volatile("mov %%cr0,%0\n\t" :"=r" (val), "=m" (__force_order));
+	return val;
+}
+
+static inline void native_write_cr0(unsigned long val)
+{
+	asm volatile("mov %0,%%cr0": :"r" (val), "m" (__force_order));
+}
+
+static inline unsigned long native_read_cr2(void)
+{
+	unsigned long val;
+	asm volatile("mov %%cr2,%0\n\t" :"=r" (val), "=m" (__force_order));
+	return val;
+}
+
+static inline void native_write_cr2(unsigned long val)
+{
+	asm volatile("mov %0,%%cr2": :"r" (val), "m" (__force_order));
+}
+
+static inline unsigned long native_read_cr3(void)
+{
+	unsigned long val;
+	asm volatile("mov %%cr3,%0\n\t" :"=r" (val), "=m" (__force_order));
+	return val;
+}
+
+static inline void native_write_cr3(unsigned long val)
+{
+	asm volatile("mov %0,%%cr3": :"r" (val), "m" (__force_order));
+}
+
+static inline unsigned long native_read_cr4(void)
+{
+	unsigned long val;
+	asm volatile("mov %%cr4,%0\n\t" :"=r" (val), "=m" (__force_order));
+	return val;
+}
+
+static inline unsigned long native_read_cr4_safe(void)
+{
+	unsigned long val;
+	/* This could fault if %cr4 does not exist. In x86_64, a cr4 always
+	 * exists, so it will never fail. */
+#ifdef CONFIG_X86_32
+	asm volatile("1: mov %%cr4, %0		\n"
+		"2:				\n"
+		".section __ex_table,\"a\"	\n"
+		".long 1b,2b			\n"
+		".previous			\n"
+		: "=r" (val), "=m" (__force_order) : "0" (0));
+#else
+	val = native_read_cr4();
+#endif
+	return val;
+}
+
+static inline void native_write_cr4(unsigned long val)
+{
+	asm volatile("mov %0,%%cr4": :"r" (val), "m" (__force_order));
+}
+
+static inline unsigned long native_read_cr8(void)
+{
+	unsigned long cr8;
+	asm volatile("mov %%cr8,%0" : "=r" (cr8), "=m" (__force_order));
+	return cr8;
+}
+
+static inline void native_write_cr8(unsigned long val)
+{
+	asm volatile("mov %0,%%cr8" : : "r" (val));
+}
+
+static inline void native_wbinvd(void)
+{
+	asm volatile("wbinvd": : :"memory");
+}
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else
+#define read_cr0()	(native_read_cr0())
+#define write_cr0(x)	(native_write_cr0(x))
+#define read_cr2()	(native_read_cr2())
+#define write_cr2(x)	(native_write_cr2(x))
+#define read_cr3()	(native_read_cr3())
+#define write_cr3(x)	(native_write_cr3(x))
+#define read_cr4()	(native_read_cr4())
+#define read_cr4_safe()	(native_read_cr4_safe())
+#define write_cr4(x)	(native_write_cr4(x))
+#define read_cr8()	(native_read_cr8())
+#define write_cr8(x)	(native_write_cr8(x))
+#define wbinvd()	(native_wbinvd())
+
+/* Clear the 'TS' bit */
+#define clts()		(native_clts())
+
+#endif/* CONFIG_PARAVIRT */
+
+#define stts() write_cr0(8 | read_cr0())
+
 #endif /* __KERNEL__ */
 
 static inline void clflush(void *__p)
diff --git a/include/asm-x86/system_32.h b/include/asm-x86/system_32.h
index a0641a3..6c69567 100644
--- a/include/asm-x86/system_32.h
+++ b/include/asm-x86/system_32.h
@@ -1,7 +1,6 @@
 #ifndef __ASM_SYSTEM_H
 #define __ASM_SYSTEM_H
 
-#include <linux/kernel.h>
 #include <asm/segment.h>
 #include <asm/cpufeature.h>
 #include <asm/cmpxchg.h>
@@ -34,99 +33,6 @@ extern struct task_struct * FASTCALL(__switch_to(struct task_struct *prev, struc
 		      "2" (prev), "d" (next));				\
 } while (0)
 
-static inline void native_clts(void)
-{
-	asm volatile ("clts");
-}
-
-static inline unsigned long native_read_cr0(void)
-{
-	unsigned long val;
-	asm volatile("movl %%cr0,%0\n\t" :"=r" (val));
-	return val;
-}
-
-static inline void native_write_cr0(unsigned long val)
-{
-	asm volatile("movl %0,%%cr0": :"r" (val));
-}
-
-static inline unsigned long native_read_cr2(void)
-{
-	unsigned long val;
-	asm volatile("movl %%cr2,%0\n\t" :"=r" (val));
-	return val;
-}
-
-static inline void native_write_cr2(unsigned long val)
-{
-	asm volatile("movl %0,%%cr2": :"r" (val));
-}
-
-static inline unsigned long native_read_cr3(void)
-{
-	unsigned long val;
-	asm volatile("movl %%cr3,%0\n\t" :"=r" (val));
-	return val;
-}
-
-static inline void native_write_cr3(unsigned long val)
-{
-	asm volatile("movl %0,%%cr3": :"r" (val));
-}
-
-static inline unsigned long native_read_cr4(void)
-{
-	unsigned long val;
-	asm volatile("movl %%cr4,%0\n\t" :"=r" (val));
-	return val;
-}
-
-static inline unsigned long native_read_cr4_safe(void)
-{
-	unsigned long val;
-	/* This could fault if %cr4 does not exist */
-	asm volatile("1: movl %%cr4, %0		\n"
-		"2:				\n"
-		".section __ex_table,\"a\"	\n"
-		".long 1b,2b			\n"
-		".previous			\n"
-		: "=r" (val): "0" (0));
-	return val;
-}
-
-static inline void native_write_cr4(unsigned long val)
-{
-	asm volatile("movl %0,%%cr4": :"r" (val));
-}
-
-static inline void native_wbinvd(void)
-{
-	asm volatile("wbinvd": : :"memory");
-}
-
-#ifdef CONFIG_PARAVIRT
-#include <asm/paravirt.h>
-#else
-#define read_cr0()	(native_read_cr0())
-#define write_cr0(x)	(native_write_cr0(x))
-#define read_cr2()	(native_read_cr2())
-#define write_cr2(x)	(native_write_cr2(x))
-#define read_cr3()	(native_read_cr3())
-#define write_cr3(x)	(native_write_cr3(x))
-#define read_cr4()	(native_read_cr4())
-#define read_cr4_safe()	(native_read_cr4_safe())
-#define write_cr4(x)	(native_write_cr4(x))
-#define wbinvd()	(native_wbinvd())
-
-/* Clear the 'TS' bit */
-#define clts()		(native_clts())
-
-#endif/* CONFIG_PARAVIRT */
-
-/* Set the 'TS' bit */
-#define stts() write_cr0(8 | read_cr0())
-
 #endif	/* __KERNEL__ */
 
 
diff --git a/include/asm-x86/system_64.h b/include/asm-x86/system_64.h
index da46059..3da8ec2 100644
--- a/include/asm-x86/system_64.h
+++ b/include/asm-x86/system_64.h
@@ -1,7 +1,6 @@
 #ifndef __ASM_SYSTEM_H
 #define __ASM_SYSTEM_H
 
-#include <linux/kernel.h>
 #include <asm/segment.h>
 #include <asm/cmpxchg.h>
 
@@ -39,78 +38,6 @@
 		       [thread_info] "i" (offsetof(struct task_struct, stack)), \
 		       [pda_pcurrent] "i" (offsetof(struct x8664_pda, pcurrent))   \
 		     : "memory", "cc" __EXTRA_CLOBBER)
-    
-extern void load_gs_index(unsigned); 
-
-/*
- * Clear and set 'TS' bit respectively
- */
-#define clts() __asm__ __volatile__ ("clts")
-
-static inline unsigned long read_cr0(void)
-{ 
-	unsigned long cr0;
-	asm volatile("movq %%cr0,%0" : "=r" (cr0));
-	return cr0;
-}
-
-static inline void write_cr0(unsigned long val) 
-{ 
-	asm volatile("movq %0,%%cr0" :: "r" (val));
-}
-
-static inline unsigned long read_cr2(void)
-{
-	unsigned long cr2;
-	asm volatile("movq %%cr2,%0" : "=r" (cr2));
-	return cr2;
-}
-
-static inline void write_cr2(unsigned long val)
-{
-	asm volatile("movq %0,%%cr2" :: "r" (val));
-}
-
-static inline unsigned long read_cr3(void)
-{ 
-	unsigned long cr3;
-	asm volatile("movq %%cr3,%0" : "=r" (cr3));
-	return cr3;
-}
-
-static inline void write_cr3(unsigned long val)
-{
-	asm volatile("movq %0,%%cr3" :: "r" (val) : "memory");
-}
-
-static inline unsigned long read_cr4(void)
-{ 
-	unsigned long cr4;
-	asm volatile("movq %%cr4,%0" : "=r" (cr4));
-	return cr4;
-}
-
-static inline void write_cr4(unsigned long val)
-{ 
-	asm volatile("movq %0,%%cr4" :: "r" (val) : "memory");
-}
-
-static inline unsigned long read_cr8(void)
-{
-	unsigned long cr8;
-	asm volatile("movq %%cr8,%0" : "=r" (cr8));
-	return cr8;
-}
-
-static inline void write_cr8(unsigned long val)
-{
-	asm volatile("movq %0,%%cr8" :: "r" (val) : "memory");
-}
-
-#define stts() write_cr0(8 | read_cr0())
-
-#define wbinvd() \
-	__asm__ __volatile__ ("wbinvd": : :"memory")
 
 #endif	/* __KERNEL__ */
 
-- 
1.4.4.2


  reply	other threads:[~2007-12-04 18:52 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-12-04 16:06 [PATCH 0/8] Integrate system.h Glauber de Oliveira Costa
2007-12-04 16:06 ` [PATCH 1/8] remove volatile keyword from clflush Glauber de Oliveira Costa
2007-12-04 16:06   ` [PATCH 2/8] put together equal pieces of system.h Glauber de Oliveira Costa
2007-12-04 16:06     ` [PATCH 3/8] unify load_segment macro Glauber de Oliveira Costa
2007-12-04 16:06       ` Glauber de Oliveira Costa [this message]
2007-12-04 16:06         ` [PATCH 5/8] remove unused macro Glauber de Oliveira Costa
2007-12-04 16:06           ` [PATCH 6/8] unify smp parts of system.h Glauber de Oliveira Costa
2007-12-04 16:06             ` [PATCH 7/8] move switch_to macro to system.h Glauber de Oliveira Costa
2007-12-04 16:06               ` [PATCH 8/8] unify system.h Glauber de Oliveira Costa
2007-12-04 19:18         ` [PATCH 4/8] unify paravirt parts of system.h Avi Kivity
2007-12-04 19:34           ` Andi Kleen
2007-12-05 16:30             ` Pavel Machek
2007-12-15 13:17               ` Ingo Molnar
2007-12-17  0:27                 ` Rafael J. Wysocki
2007-12-17  0:23                   ` Pavel Machek
2007-12-17  0:58                     ` Rafael J. Wysocki
2007-12-15 13:26               ` Andi Kleen
2007-12-15 22:54                 ` Pavel Machek
2007-12-15 20:28               ` H. Peter Anvin
2007-12-04 19:41           ` Glauber de Oliveira Costa
2007-12-04 22:14             ` Denys Vlasenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=11967844071346-git-send-email-gcosta@redhat.com \
    --to=gcosta@redhat.com \
    --cc=ak@suse.de \
    --cc=akpm@linux-foundation.org \
    --cc=anthony@codemonkey.ws \
    --cc=avi@qumranet.com \
    --cc=chrisw@sous-sol.org \
    --cc=ehabkost@redhat.com \
    --cc=glommer@gmail.com \
    --cc=hpa@zytor.com \
    --cc=jeremy@goop.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=rostedt@goodmis.org \
    --cc=rusty@rustcorp.com.au \
    --cc=tglx@linutronix.de \
    --cc=virtualization@lists.linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).