From: Glauber de Oliveira Costa <gcosta@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: akpm@linux-foundation.org, glommer@gmail.com, tglx@linutronix.de,
mingo@elte.hu, ehabkost@redhat.com, jeremy@goop.org,
avi@qumranet.com, anthony@codemonkey.ws,
virtualization@lists.linux-foundation.org, rusty@rustcorp.com.au,
ak@suse.de, chrisw@sous-sol.org, rostedt@goodmis.org,
hpa@zytor.com, Glauber de Oliveira Costa <gcosta@redhat.com>
Subject: [PATCH 5/9] unify paravirt parts of system.h
Date: Wed, 5 Dec 2007 13:08:29 -0200 [thread overview]
Message-ID: <11968673383347-git-send-email-gcosta@redhat.com> (raw)
In-Reply-To: <1196867333728-git-send-email-gcosta@redhat.com>
This patch moves the i386 control registers manipulation functions,
wbinvd, and clts functions to system.h. They are essentially the same
as in x86_64.
With this, system.h paravirt comes for free in x86_64.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
---
include/asm-x86/system.h | 110 +++++++++++++++++++++++++++++++++++++++++++
include/asm-x86/system_32.h | 94 ------------------------------------
include/asm-x86/system_64.h | 61 ------------------------
3 files changed, 110 insertions(+), 155 deletions(-)
diff --git a/include/asm-x86/system.h b/include/asm-x86/system.h
index 1ac6088..518b7bd 100644
--- a/include/asm-x86/system.h
+++ b/include/asm-x86/system.h
@@ -3,6 +3,8 @@
#include <asm/asm.h>
+#include <linux/kernel.h>
+
#ifdef CONFIG_X86_32
# include "system_32.h"
#else
@@ -38,6 +40,8 @@ __asm__ __volatile__ ("movw %%dx,%1\n\t" \
#define set_base(ldt, base) _set_base(((char *)&(ldt)) , (base))
#define set_limit(ldt, limit) _set_limit(((char *)&(ldt)) , ((limit)-1))
+extern void load_gs_index(unsigned);
+
/*
* Load a segment. Fall back on loading the zero
* segment if something goes wrong..
@@ -72,6 +76,112 @@ static inline unsigned long get_limit(unsigned long segment)
:"=r" (__limit):"r" (segment));
return __limit+1;
}
+
+static inline void native_clts(void)
+{
+ asm volatile ("clts");
+}
+
+/*
+ * Volatile isn't enough to prevent the compiler from reordering the
+ * read/write functions for the control registers and messing everything up.
+ * A memory clobber would solve the problem, but would prevent reordering of
+ * all loads stores around it, which can hurt performance. Solution is to
+ * use a variable and mimic reads and writes to it to enforce serialization
+ */
+static unsigned long __force_order;
+
+static inline unsigned long native_read_cr0(void)
+{
+ unsigned long val;
+ asm volatile("mov %%cr0,%0\n\t" :"=r" (val), "=m" (__force_order));
+ return val;
+}
+
+static inline void native_write_cr0(unsigned long val)
+{
+ asm volatile("mov %0,%%cr0": :"r" (val), "m" (__force_order));
+}
+
+static inline unsigned long native_read_cr2(void)
+{
+ unsigned long val;
+ asm volatile("mov %%cr2,%0\n\t" :"=r" (val), "=m" (__force_order));
+ return val;
+}
+
+static inline void native_write_cr2(unsigned long val)
+{
+ asm volatile("mov %0,%%cr2": :"r" (val), "m" (__force_order));
+}
+
+static inline unsigned long native_read_cr3(void)
+{
+ unsigned long val;
+ asm volatile("mov %%cr3,%0\n\t" :"=r" (val), "=m" (__force_order));
+ return val;
+}
+
+static inline void native_write_cr3(unsigned long val)
+{
+ asm volatile("mov %0,%%cr3": :"r" (val), "m" (__force_order));
+}
+
+static inline unsigned long native_read_cr4(void)
+{
+ unsigned long val;
+ asm volatile("mov %%cr4,%0\n\t" :"=r" (val), "=m" (__force_order));
+ return val;
+}
+
+static inline unsigned long native_read_cr4_safe(void)
+{
+ unsigned long val;
+ /* This could fault if %cr4 does not exist. In x86_64, a cr4 always
+ * exists, so it will never fail. */
+#ifdef CONFIG_X86_32
+ asm volatile("1: mov %%cr4, %0 \n"
+ "2: \n"
+ ".section __ex_table,\"a\" \n"
+ ".long 1b,2b \n"
+ ".previous \n"
+ : "=r" (val), "=m" (__force_order) : "0" (0));
+#else
+ val = native_read_cr4();
+#endif
+ return val;
+}
+
+static inline void native_write_cr4(unsigned long val)
+{
+ asm volatile("mov %0,%%cr4": :"r" (val), "m" (__force_order));
+}
+
+static inline void native_wbinvd(void)
+{
+ asm volatile("wbinvd": : :"memory");
+}
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else
+#define read_cr0() (native_read_cr0())
+#define write_cr0(x) (native_write_cr0(x))
+#define read_cr2() (native_read_cr2())
+#define write_cr2(x) (native_write_cr2(x))
+#define read_cr3() (native_read_cr3())
+#define write_cr3(x) (native_write_cr3(x))
+#define read_cr4() (native_read_cr4())
+#define read_cr4_safe() (native_read_cr4_safe())
+#define write_cr4(x) (native_write_cr4(x))
+#define wbinvd() (native_wbinvd())
+
+/* Clear the 'TS' bit */
+#define clts() (native_clts())
+
+#endif/* CONFIG_PARAVIRT */
+
+#define stts() write_cr0(8 | read_cr0())
+
#endif /* __KERNEL__ */
static inline void clflush(void *__p)
diff --git a/include/asm-x86/system_32.h b/include/asm-x86/system_32.h
index a0641a3..6c69567 100644
--- a/include/asm-x86/system_32.h
+++ b/include/asm-x86/system_32.h
@@ -1,7 +1,6 @@
#ifndef __ASM_SYSTEM_H
#define __ASM_SYSTEM_H
-#include <linux/kernel.h>
#include <asm/segment.h>
#include <asm/cpufeature.h>
#include <asm/cmpxchg.h>
@@ -34,99 +33,6 @@ extern struct task_struct * FASTCALL(__switch_to(struct task_struct *prev, struc
"2" (prev), "d" (next)); \
} while (0)
-static inline void native_clts(void)
-{
- asm volatile ("clts");
-}
-
-static inline unsigned long native_read_cr0(void)
-{
- unsigned long val;
- asm volatile("movl %%cr0,%0\n\t" :"=r" (val));
- return val;
-}
-
-static inline void native_write_cr0(unsigned long val)
-{
- asm volatile("movl %0,%%cr0": :"r" (val));
-}
-
-static inline unsigned long native_read_cr2(void)
-{
- unsigned long val;
- asm volatile("movl %%cr2,%0\n\t" :"=r" (val));
- return val;
-}
-
-static inline void native_write_cr2(unsigned long val)
-{
- asm volatile("movl %0,%%cr2": :"r" (val));
-}
-
-static inline unsigned long native_read_cr3(void)
-{
- unsigned long val;
- asm volatile("movl %%cr3,%0\n\t" :"=r" (val));
- return val;
-}
-
-static inline void native_write_cr3(unsigned long val)
-{
- asm volatile("movl %0,%%cr3": :"r" (val));
-}
-
-static inline unsigned long native_read_cr4(void)
-{
- unsigned long val;
- asm volatile("movl %%cr4,%0\n\t" :"=r" (val));
- return val;
-}
-
-static inline unsigned long native_read_cr4_safe(void)
-{
- unsigned long val;
- /* This could fault if %cr4 does not exist */
- asm volatile("1: movl %%cr4, %0 \n"
- "2: \n"
- ".section __ex_table,\"a\" \n"
- ".long 1b,2b \n"
- ".previous \n"
- : "=r" (val): "0" (0));
- return val;
-}
-
-static inline void native_write_cr4(unsigned long val)
-{
- asm volatile("movl %0,%%cr4": :"r" (val));
-}
-
-static inline void native_wbinvd(void)
-{
- asm volatile("wbinvd": : :"memory");
-}
-
-#ifdef CONFIG_PARAVIRT
-#include <asm/paravirt.h>
-#else
-#define read_cr0() (native_read_cr0())
-#define write_cr0(x) (native_write_cr0(x))
-#define read_cr2() (native_read_cr2())
-#define write_cr2(x) (native_write_cr2(x))
-#define read_cr3() (native_read_cr3())
-#define write_cr3(x) (native_write_cr3(x))
-#define read_cr4() (native_read_cr4())
-#define read_cr4_safe() (native_read_cr4_safe())
-#define write_cr4(x) (native_write_cr4(x))
-#define wbinvd() (native_wbinvd())
-
-/* Clear the 'TS' bit */
-#define clts() (native_clts())
-
-#endif/* CONFIG_PARAVIRT */
-
-/* Set the 'TS' bit */
-#define stts() write_cr0(8 | read_cr0())
-
#endif /* __KERNEL__ */
diff --git a/include/asm-x86/system_64.h b/include/asm-x86/system_64.h
index d7f0776..2757258 100644
--- a/include/asm-x86/system_64.h
+++ b/include/asm-x86/system_64.h
@@ -1,7 +1,6 @@
#ifndef __ASM_SYSTEM_H
#define __ASM_SYSTEM_H
-#include <linux/kernel.h>
#include <asm/segment.h>
#include <asm/cmpxchg.h>
@@ -40,66 +39,6 @@
[pda_pcurrent] "i" (offsetof(struct x8664_pda, pcurrent)) \
: "memory", "cc" __EXTRA_CLOBBER)
-extern void load_gs_index(unsigned);
-
-/*
- * Clear and set 'TS' bit respectively
- */
-#define clts() __asm__ __volatile__ ("clts")
-
-static inline unsigned long read_cr0(void)
-{
- unsigned long cr0;
- asm volatile("movq %%cr0,%0" : "=r" (cr0));
- return cr0;
-}
-
-static inline void write_cr0(unsigned long val)
-{
- asm volatile("movq %0,%%cr0" :: "r" (val));
-}
-
-static inline unsigned long read_cr2(void)
-{
- unsigned long cr2;
- asm volatile("movq %%cr2,%0" : "=r" (cr2));
- return cr2;
-}
-
-static inline void write_cr2(unsigned long val)
-{
- asm volatile("movq %0,%%cr2" :: "r" (val));
-}
-
-static inline unsigned long read_cr3(void)
-{
- unsigned long cr3;
- asm volatile("movq %%cr3,%0" : "=r" (cr3));
- return cr3;
-}
-
-static inline void write_cr3(unsigned long val)
-{
- asm volatile("movq %0,%%cr3" :: "r" (val) : "memory");
-}
-
-static inline unsigned long read_cr4(void)
-{
- unsigned long cr4;
- asm volatile("movq %%cr4,%0" : "=r" (cr4));
- return cr4;
-}
-
-static inline void write_cr4(unsigned long val)
-{
- asm volatile("movq %0,%%cr4" :: "r" (val) : "memory");
-}
-
-#define stts() write_cr0(8 | read_cr0())
-
-#define wbinvd() \
- __asm__ __volatile__ ("wbinvd": : :"memory")
-
#endif /* __KERNEL__ */
#ifdef CONFIG_SMP
--
1.4.4.2
next prev parent reply other threads:[~2007-12-05 17:54 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-05 15:08 [PATCH 0/9 - v2] Integrate system.h Glauber de Oliveira Costa
2007-12-05 15:08 ` [PATCH 1/9] remove volatile keyword from clflush Glauber de Oliveira Costa
2007-12-05 15:08 ` [PATCH 2/9] put together equal pieces of system.h Glauber de Oliveira Costa
2007-12-05 15:08 ` [PATCH 3/9] unify load_segment macro Glauber de Oliveira Costa
2007-12-05 15:08 ` [PATCH 4/9] remove references to cr8 register Glauber de Oliveira Costa
2007-12-05 15:08 ` Glauber de Oliveira Costa [this message]
2007-12-05 15:08 ` [PATCH 6/9] remove unused macro Glauber de Oliveira Costa
2007-12-05 15:08 ` [PATCH 7/9] unify smp parts of system.h Glauber de Oliveira Costa
2007-12-05 15:08 ` [PATCH 8/9] move switch_to macro to system.h Glauber de Oliveira Costa
2007-12-05 15:08 ` [PATCH 9/9] unify system.h Glauber de Oliveira Costa
2007-12-06 21:11 ` [PATCH 1/9] remove volatile keyword from clflush Jeremy Fitzhardinge
2007-12-05 20:22 ` [PATCH 0/9 - v2] Integrate system.h Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11968673383347-git-send-email-gcosta@redhat.com \
--to=gcosta@redhat.com \
--cc=ak@suse.de \
--cc=akpm@linux-foundation.org \
--cc=anthony@codemonkey.ws \
--cc=avi@qumranet.com \
--cc=chrisw@sous-sol.org \
--cc=ehabkost@redhat.com \
--cc=glommer@gmail.com \
--cc=hpa@zytor.com \
--cc=jeremy@goop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=rostedt@goodmis.org \
--cc=rusty@rustcorp.com.au \
--cc=tglx@linutronix.de \
--cc=virtualization@lists.linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).