linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Auger Eric <eric.auger@redhat.com>
To: Jacob Pan <jacob.jun.pan@linux.intel.com>,
	iommu@lists.linux-foundation.org,
	LKML <linux-kernel@vger.kernel.org>,
	Lu Baolu <baolu.lu@linux.intel.com>,
	Joerg Roedel <joro@8bytes.org>,
	David Woodhouse <dwmw2@infradead.org>
Cc: Yi Liu <yi.l.liu@intel.com>, "Tian, Kevin" <kevin.tian@intel.com>,
	Raj Ashok <ashok.raj@intel.com>,
	Alex Williamson <alex.williamson@redhat.com>,
	Christoph Hellwig <hch@infradead.org>,
	Jean-Philippe Brucker <jean-philippe@linaro.com>,
	Jonathan Cameron <jic23@kernel.org>
Subject: Re: [PATCH V9 05/10] iommu/vt-d: Support flushing more translation cache types
Date: Wed, 12 Feb 2020 13:55:25 +0100	[thread overview]
Message-ID: <11add211-dec0-1932-c29c-22cbbf145bd4@redhat.com> (raw)
In-Reply-To: <1580277713-66934-6-git-send-email-jacob.jun.pan@linux.intel.com>

Hi Jacob,

On 1/29/20 7:01 AM, Jacob Pan wrote:
> When Shared Virtual Memory is exposed to a guest via vIOMMU, scalable
> IOTLB invalidation may be passed down from outside IOMMU subsystems.
> This patch adds invalidation functions that can be used for additional
> translation cache types.
> 
> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
> ---
>  drivers/iommu/dmar.c        | 33 +++++++++++++++++++++++++++++++++
>  drivers/iommu/intel-pasid.c |  3 ++-
>  include/linux/intel-iommu.h | 20 ++++++++++++++++----
>  3 files changed, 51 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/iommu/dmar.c b/drivers/iommu/dmar.c
> index 071bb42bbbc5..206733ec8140 100644
> --- a/drivers/iommu/dmar.c
> +++ b/drivers/iommu/dmar.c
> @@ -1411,6 +1411,39 @@ void qi_flush_piotlb(struct intel_iommu *iommu, u16 did, u32 pasid, u64 addr,
>  	qi_submit_sync(&desc, iommu);
>  }
>  
> +/* PASID-based device IOTLB Invalidate */
> +void qi_flush_dev_iotlb_pasid(struct intel_iommu *iommu, u16 sid, u16 pfsid,
> +		u32 pasid,  u16 qdep, u64 addr, unsigned size_order, u64 granu)
> +{
> +	struct qi_desc desc = {.qw2 = 0, .qw3 = 0};
> +
> +	desc.qw0 = QI_DEV_EIOTLB_PASID(pasid) | QI_DEV_EIOTLB_SID(sid) |
> +		QI_DEV_EIOTLB_QDEP(qdep) | QI_DEIOTLB_TYPE |
> +		QI_DEV_IOTLB_PFSID(pfsid);
> +	desc.qw1 = QI_DEV_EIOTLB_GLOB(granu);
> +
> +	/* If S bit is 0, we only flush a single page. If S bit is set,
> +	 * The least significant zero bit indicates the invalidation address
> +	 * range. VT-d spec 6.5.2.6.
> +	 * e.g. address bit 12[0] indicates 8KB, 13[0] indicates 16KB.
> +	 */
> +	if (!size_order) {
> +		desc.qw0 |= QI_DEV_EIOTLB_ADDR(addr) & ~QI_DEV_EIOTLB_SIZE;
> +	} else {
> +		unsigned long mask = 1UL << (VTD_PAGE_SHIFT + size_order);
> +		desc.qw1 |= QI_DEV_EIOTLB_ADDR(addr & ~mask) | QI_DEV_EIOTLB_SIZE;
> +	}
> +	qi_submit_sync(&desc, iommu);
I made some comments in
https://lkml.org/lkml/2019/8/14/1311
that do not seem to have been taken into account. Or do I miss something?

More generally having an individual history log would be useful and
speed up the review.

Thanks

Eric
> +}
> +
> +void qi_flush_pasid_cache(struct intel_iommu *iommu, u16 did, u64 granu, int pasid)
> +{
> +	struct qi_desc desc = {.qw1 = 0, .qw2 = 0, .qw3 = 0};
> +
> +	desc.qw0 = QI_PC_PASID(pasid) | QI_PC_DID(did) | QI_PC_GRAN(granu) | QI_PC_TYPE;
> +	qi_submit_sync(&desc, iommu);
> +}
> +
>  /*
>   * Disable Queued Invalidation interface.
>   */
> diff --git a/drivers/iommu/intel-pasid.c b/drivers/iommu/intel-pasid.c
> index bd067af4d20b..b100f51407f9 100644
> --- a/drivers/iommu/intel-pasid.c
> +++ b/drivers/iommu/intel-pasid.c
> @@ -435,7 +435,8 @@ pasid_cache_invalidation_with_pasid(struct intel_iommu *iommu,
>  {
>  	struct qi_desc desc;
>  
> -	desc.qw0 = QI_PC_DID(did) | QI_PC_PASID_SEL | QI_PC_PASID(pasid);
> +	desc.qw0 = QI_PC_DID(did) | QI_PC_GRAN(QI_PC_PASID_SEL) |
> +		QI_PC_PASID(pasid) | QI_PC_TYPE;
>  	desc.qw1 = 0;
>  	desc.qw2 = 0;
>  	desc.qw3 = 0;
> diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h
> index b0ffecbc0dfc..dd9fa61689bc 100644
> --- a/include/linux/intel-iommu.h
> +++ b/include/linux/intel-iommu.h
> @@ -332,7 +332,7 @@ enum {
>  #define QI_IOTLB_GRAN(gran) 	(((u64)gran) >> (DMA_TLB_FLUSH_GRANU_OFFSET-4))
>  #define QI_IOTLB_ADDR(addr)	(((u64)addr) & VTD_PAGE_MASK)
>  #define QI_IOTLB_IH(ih)		(((u64)ih) << 6)
> -#define QI_IOTLB_AM(am)		(((u8)am))
> +#define QI_IOTLB_AM(am)		(((u8)am) & 0x3f)
>  
>  #define QI_CC_FM(fm)		(((u64)fm) << 48)
>  #define QI_CC_SID(sid)		(((u64)sid) << 32)
> @@ -351,16 +351,21 @@ enum {
>  #define QI_PC_DID(did)		(((u64)did) << 16)
>  #define QI_PC_GRAN(gran)	(((u64)gran) << 4)
>  
> -#define QI_PC_ALL_PASIDS	(QI_PC_TYPE | QI_PC_GRAN(0))
> -#define QI_PC_PASID_SEL		(QI_PC_TYPE | QI_PC_GRAN(1))
> +/* PASID cache invalidation granu */
> +#define QI_PC_ALL_PASIDS	0
> +#define QI_PC_PASID_SEL		1
>  
>  #define QI_EIOTLB_ADDR(addr)	((u64)(addr) & VTD_PAGE_MASK)
>  #define QI_EIOTLB_IH(ih)	(((u64)ih) << 6)
> -#define QI_EIOTLB_AM(am)	(((u64)am))
> +#define QI_EIOTLB_AM(am)	(((u64)am) & 0x3f)
>  #define QI_EIOTLB_PASID(pasid) 	(((u64)pasid) << 32)
>  #define QI_EIOTLB_DID(did)	(((u64)did) << 16)
>  #define QI_EIOTLB_GRAN(gran) 	(((u64)gran) << 4)
>  
> +/* QI Dev-IOTLB inv granu */
> +#define QI_DEV_IOTLB_GRAN_ALL		1
> +#define QI_DEV_IOTLB_GRAN_PASID_SEL	0
> +
>  #define QI_DEV_EIOTLB_ADDR(a)	((u64)(a) & VTD_PAGE_MASK)
>  #define QI_DEV_EIOTLB_SIZE	(((u64)1) << 11)
>  #define QI_DEV_EIOTLB_GLOB(g)	((u64)g)
> @@ -660,8 +665,15 @@ extern void qi_flush_iotlb(struct intel_iommu *iommu, u16 did, u64 addr,
>  			  unsigned int size_order, u64 type);
>  extern void qi_flush_dev_iotlb(struct intel_iommu *iommu, u16 sid, u16 pfsid,
>  			u16 qdep, u64 addr, unsigned mask);
> +
>  void qi_flush_piotlb(struct intel_iommu *iommu, u16 did, u32 pasid, u64 addr,
>  		     unsigned long npages, bool ih);
> +
> +extern void qi_flush_dev_iotlb_pasid(struct intel_iommu *iommu, u16 sid, u16 pfsid,
> +			u32 pasid, u16 qdep, u64 addr, unsigned size_order, u64 granu);
> +
> +extern void qi_flush_pasid_cache(struct intel_iommu *iommu, u16 did, u64 granu, int pasid);
> +
>  extern int qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu);
>  
>  extern int dmar_ir_support(void);
> 


  reply	other threads:[~2020-02-12 12:55 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-29  6:01 [PATCH V9 00/10] Nested Shared Virtual Address (SVA) VT-d support Jacob Pan
2020-01-29  6:01 ` [PATCH V9 01/10] iommu/vt-d: Move domain helper to header Jacob Pan
2020-01-29  6:01 ` [PATCH V9 02/10] iommu/uapi: Define a mask for bind data Jacob Pan
2020-02-12 12:43   ` Auger Eric
2020-03-20 21:35     ` Jacob Pan
2020-01-29  6:01 ` [PATCH V9 03/10] iommu/vt-d: Add nested translation helper function Jacob Pan
2020-02-12 12:43   ` Auger Eric
2020-02-24 22:55     ` Jacob Pan
2020-01-29  6:01 ` [PATCH V9 04/10] iommu/vt-d: Add bind guest PASID support Jacob Pan
2020-01-30  7:22   ` Lu Baolu
2020-01-31 21:48     ` Jacob Pan
2020-01-29  6:01 ` [PATCH V9 05/10] iommu/vt-d: Support flushing more translation cache types Jacob Pan
2020-02-12 12:55   ` Auger Eric [this message]
2020-02-14 23:27     ` Jacob Pan
2020-02-25  8:32       ` Auger Eric
2020-01-29  6:01 ` [PATCH V9 06/10] iommu/vt-d: Add svm/sva invalidate function Jacob Pan
2020-02-12 13:13   ` Auger Eric
2020-02-14 23:48     ` Jacob Pan
2020-02-21  6:34   ` Liu, Yi L
2020-02-21 19:08     ` Jacob Pan
2020-01-29  6:01 ` [PATCH V9 07/10] iommu/vt-d: Cache virtual command capability register Jacob Pan
2020-02-12 13:00   ` Auger Eric
2020-02-21 20:20     ` Jacob Pan
2020-01-29  6:01 ` [PATCH V9 08/10] iommu/vt-d: Enlightened PASID allocation Jacob Pan
2020-01-29  6:01 ` [PATCH V9 09/10] iommu/vt-d: Add custom allocator for IOASID Jacob Pan
2020-01-29  6:01 ` [PATCH V9 10/10] iommu/vt-d: Report PASID format as domain attribute Jacob Pan
2020-01-30  7:54   ` Lu Baolu
2020-02-04  5:43     ` Jacob Pan
2020-01-29 12:18 ` [PATCH V9 00/10] Nested Shared Virtual Address (SVA) VT-d support Liu, Yi L

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=11add211-dec0-1932-c29c-22cbbf145bd4@redhat.com \
    --to=eric.auger@redhat.com \
    --cc=alex.williamson@redhat.com \
    --cc=ashok.raj@intel.com \
    --cc=baolu.lu@linux.intel.com \
    --cc=dwmw2@infradead.org \
    --cc=hch@infradead.org \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jacob.jun.pan@linux.intel.com \
    --cc=jean-philippe@linaro.com \
    --cc=jic23@kernel.org \
    --cc=joro@8bytes.org \
    --cc=kevin.tian@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=yi.l.liu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).